| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN proudly produces and stocks an extensive range of commercially pure titanium plates, including Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses ranging impressively from 0.5 mm to 120 mm. These titanium plates are renowned as the 'workhorses' within the commercially pure titanium family, offering a unique combination of high strength, exceptional ductility, and outstanding corrosion resistance, making them ideal for a multitude of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are celebrated for their exceptional balance of strength and ductility. These commercially pure titanium plates feature remarkable impact strength and are easy to weld. They exhibit excellent resistance to corrosion in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they offer superb resistance to seawater and salt solutions.
Gr5 (Grade 5) Ti-6Al-4V titanium alloy plates are engineered with a composition of 90% titanium, 6% aluminum, and 4% vanadium, classifying them as α-β type titanium alloys, where aluminum stabilizes the α phase and vanadium stabilizes the β phase. Gr5 Ti-6Al-4V titanium alloy plates are distinguished by their exceptional comprehensive performance and excellent process capabilities. These plates exhibit superb strength at both room and high temperatures, good creep resistance, thermal stability, high fatigue performance, and resistance to *** growth in seawater. They also possess satisfactory fracture toughness and hot salt stress corrosion performance. Furthermore, Gr5 Ti-6Al-4V titanium alloy plates boast outstanding process plasticity and superplasticity, making them suitable for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This premium-grade plate is meticulously produced through plate rolling, culminating in the precision of cold rolling. Available in work-hardened or heat-treated conditions, each sheet is tailored to your exact specifications through either mechanical or chemical processing. 2. Hot-Rolled Titanium Plate: Crafted through longitudinal rolling and both longitudinal and transverse rolling, our hot-rolled plates boast thickness ranging from 3.0mm to a robust 155mm. Supplied in a heat-treated state, they can undergo creep flattening to eliminate internal stress and achieve unparalleled flatness. These customizable sheets are available as cut blanks, tailored to your complex design needs.3. Forged Titanium Plate: Expertly produced by forging steel ingots on a vertical hydraulic press, followed by rolling, or through open die forging and rolling, our forged plates meet rigorous standards. With dimensions reaching up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length, these plates are customizable to your specific requirements, agreed upon by both manufacturer and customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is your premier source for Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate. As a leading manufacturer and supplier from China, we are committed to producing the world's finest titanium alloy plates. Enjoy expedited worldwide delivery for ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 (UNS R56400) alloy titanium plates are available in thicknesses from 0.5mm to 300mm: cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm and above). The Grade 5 titanium plate (Ti-6Al-4V) is renowned for its exceptional strength, ductility, corrosion resistance, and high-temperature resilience, making it the preferred choice across various industries, including general and military applications. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN standards and more.
Ti-6Al-4V Grade 5 Titanium Plate: Essential for Aerospace, Military, Power, Vehicle Armor, Rocket Precision Guidance, Marine, and Beyond
Grade 1
Today, DAXUN Alloys stands at the forefront as a global leader in the production and supply of high-quality Grade 1 Titanium Plate.
Pure Grade 1 Titanium Plate is celebrated for its outstanding ductility and cold formability, ideal for deep drawing processes. Known for its excellent corrosion resistance against general and seawater environments, as well as its resistance to oxidizing, neutral, and mildly reducing solutions, including chlorides. Titanium's low density (approximately half that of nickel-based alloys), coupled with its high strength-to-weight ratio and corrosion resistance, makes it the material of choice for various demanding chemical conditions. Grade 1 Titanium, being commercially pure, is the softest and most ductile, offering superb cold formability, excellent corrosion resistance, weldability, and impact hardness.
Leading Producers and Suppliers of ASTM B265 Titanium Gr 1 Plates: Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled and Cold Rolled Plates, Patterned and Perforated Plates, and More. Your Trusted Source for Titanium Grade 1 Products in China.
Grade 2
DAXUN excels in the production and stocking of commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is highly regarded as the 'workhorse' of the commercially pure titanium range, offering a superior combination of strength, ductility, and corrosion resistance for a multitude of industrial applications.
Grade 2 Titanium Plate stands out as a commercially pure titanium offering, providing a remarkable balance of strength and ductility. It exhibits excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its unparalleled resistance to seawater and salt solutions makes it a prime choice for demanding marine applications.
Titanium's low density, high strength-to-weight ratio, and exceptional corrosion resistance make it indispensable across numerous applications. Grade 2 Titanium Plate effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions up to 70°C. With a melting point of 1660°C, it remains the alloy of choice for industrial applications requiring robust ductility and corrosion resistance.
DAXUN: Your Titanium Plate Specialist for Projects Big and Small. As a trusted partner, DAXUN provides not only top-quality industrial pure titanium plates and titanium alloy plates but also comprehensive technical assistance. Consider DAXUN your strategic ally in overcoming challenges and achieving your project goals with precision and efficiency.
At DAXUN's premier service center in China, we pride ourselves on having a ready stock of titanium plate products for swift order fulfillment. Leveraging advanced basic processing, precise water jet cutting, and efficient plate nesting techniques, we deliver unparalleled value to our customers, significantly reducing their time and cost expenditures.
Through relentless investment in DAXUN's cutting-edge production facilities and strategic capacity agreements with our esteemed partners, we ensure that DAXUN remains the industry leader in titanium plate quality, both today and in the future.
Reach out to DAXUN today to obtain the most competitive titanium plate prices and access comprehensive technical information.
Q1: What products can you offer?
A: We offer a wide range of high-quality steel products including general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300 series,
400 series, and duplex stainless steels like 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we are capable of manufacturing products based on your detailed drawings to ensure your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We implement stringent quality control measures at every stage of the production process.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods according to your preferences.
However, any additional costs and differences incurred during this period would need to be borne by you.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We implement stringent quality control measures at every stage of the production process.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation.
If your order is urgent, we can expedite the process in our workshop to meet your needs.
Q7. What is your Payment?
A: We accept the following payment methods:
B: 30% T/T in advance and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Share your specific use case, and we will tailor the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: FREE samples are available for your evaluation. For small pieces, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have successfully exported our stainless steel materials to a range of countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}