| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global leader in the production and supply of superior quality Grade 1 titanium plates.
Our Pure Grade 1 titanium plate boasts exceptional ductility and outstanding cold formability, making it the preferred choice for deep drawing processes. It is renowned for its superb resistance to general and seawater corrosion, effectively withstanding oxidizing, neutral, and mildly reducing media, including chlorides. The low density of titanium, approximately half that of nickel-based alloys, combined with its high strength-to-weight ratio and remarkable corrosion resistance, makes it indispensable for severe chemical environments. Commercially pure Grade 1 titanium is the most malleable and softest variant, offering excellent cold formability, remarkable corrosion resistance, superior weldability, and commendable impact hardness.
ASTM B265 Titanium Gr 1 Plate Producers, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, Titanium Grade 1 Sheets and Plates Manufacturers in China.
We ensure swift and timely delivery of Grade 1 titanium plate products, backed by a robust system integrating production capacity, information flow, logistics, and capital flow. Our order data is pushed to the logistics system in real-time, ensuring seamless data integration. Strategically positioned near highways, rivers, and seas, Daxun's processing center ensures optimal scheduling, rapid response, and efficient storage and transportation linkage, guaranteeing task completion on time.
Grade 1 titanium plate, known for its lower density and high ductility, is ideal for industries prioritizing weight management and deep drawing processes. Key industries include medical, chemical equipment, and aerospace sectors. Its strength and corrosion resistance make it indispensable in marine, chemical processing, and desalination industries. Typical applications encompass oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and diverse industrial components. Standards adhered to include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
Grade 1 Titanium Plates are offered in a cold rolled thickness range of 0.3 mm to 6.0 mm, and a hot rolled thickness range of 4.76 mm to 155 mm. Available as hot rolled or heat treated, these plates undergo longitudinal and transverse rolling. Creep flattening can also be employed as a heat treatment to alleviate internal stresses and meet specific flatness requirements. Plates can be provided as cut blanks or custom-shaped parts cut from a parent plate, with further processing tailored to customer specifications, whether mechanical or chemical.
Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a renowned expert in the metal industry, specializing in both small and large titanium plate projects. As your dedicated reference point and long-term partner, DAXUN is committed to supplying premium titanium plates and delivering comprehensive technical assistance for your business. Beyond being a supplier of industrial pure titanium plates and titanium alloy plates, DAXUN stands as your strategic ally, ensuring you overcome any challenges and meet your needs, ultimately driving your project success.
At DAXUN's state-of-the-art service center in China, we maintain a robust inventory of titanium plate products, ensuring rapid order fulfillment. Our value-added services, including basic processing, precision water jet cutting, and efficient plate nesting, empower our customers by saving valuable time and reducing costs.
Ongoing investment in DAXUN's cutting-edge production facilities, coupled with strategic capacity agreements with our partners, positions DAXUN at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and detailed technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6Al-4V Grade 5 (UNS R56400) Alloy Titanium Plate Manufacturer and Supplier from China! With a mission to create the world's highest-performing titanium alloy plates, DAXUN offers rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. We specialize in producing and stocking Grade 5 titanium plates with thicknesses spanning from 0.5mm to 300mm (cold rolled for 0.5mm-6.0mm, hot rolled for 6.0-50mm, and forged for 50mm and above). Grade 5 titanium (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, boasting superior strength, ductility, excellent corrosion resistance, and high-temperature resilience, making it the material of choice for both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other global standards.
Ti-6Al-4V Grade 5 titanium plates are primarily utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance components, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior quality Grade 1 titanium plates.
Pure Grade 1 titanium plates are celebrated for their excellent ductility and cold formability, making them ideal for deep drawing applications. Grade 1 titanium is distinguished by its superior resistance to general and seawater corrosion and its effectiveness against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and outstanding corrosion resistance, Grade 1 titanium is perfect for a wide range of harsh chemical conditions. It is the softest, most ductile commercially pure titanium with excellent cold formability, corrosion resistance, weldability, and impact hardness.
ASTM B265 Titanium Grade 1 Plate Producers, Titanium Grade 1 Sheets, Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Grade 1 Hot Rolled Plates, Cold Rolled Plates, Titanium ASTM B265 Grade 1 Sheets, Grade 1 Patterned Plates Dealers, Perforated Plates, and Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of commercially pure titanium, known for its high strength, ductility, and exceptional corrosion resistance, catering to various industrial applications.
Grade 2 Titanium Plate is a commercially pure plate offering an optimal balance of strength and ductility. It is known for good impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. It also demonstrates excellent seawater and salt solution resistance.
The low density, high strength-to-weight ratio, and exceptional corrosion resistance of titanium make it ideal for various applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it remains the preferred alloy for most industrial applications requiring good ductility and corrosion resistance.
DAXUN is a metal expert specializing in both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is committed to providing titanium plates and any technical assistance your business needs. Consider DAXUN not just as a supplier of industrial pure titanium and titanium alloy plates but as your strategic partner ready to help you overcome challenges and achieve your project goals.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of premium titanium plate products, ready for swift order fulfillment. Leveraging advanced techniques such as basic processing, precision water jet cutting, and efficient plate nesting, we deliver exceptional added value to our customers. This strategic approach not only enhances operational efficiency but also significantly reduces both time and costs, empowering our clients to excel in their respective industries.
DAXUN's unwavering commitment to excellence is underscored by continuous investments in our top-tier production facilities and strategic capacity agreements with our esteemed partners. This dedication ensures that DAXUN consistently leads the market in the quality of titanium plates, setting the benchmark both today and for the future. Experience the unparalleled quality and innovation that DAXUN brings to the titanium industry.
Reach out to DAXUN today to access the most competitive titanium plate pricing and cutting-edge technical information. Our expert team is ready to assist you with all your titanium needs, ensuring you receive the highest standard of service and the latest market insights.
Q1: What products can you offer?
A: We offer a diverse range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series. Additionally, we provide the 400 series and duplex stainless steel types like 2205, 2304, 2101, 2507. We also supply high-nickel alloys such as 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products tailored to your drawings to ensure your complete satisfaction.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We implement stringent quality control measures from start to finish to ensure excellence in our products.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can customize the packaging and transportation according to your specific requests.
However, please note that you are responsible for any additional costs and differences incurred during this process.
Q5: How does your factory handle quality control?
A: Quality is our top priority. We implement stringent quality control measures from start to finish to ensure excellence in our products.
Q6: How long is the delivery time?
A: Our delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite the process to meet your deadlines.
Q7: What is your payment method?
A: 100% T/T in advance, or Western Union for smaller orders.
B: 30% T/T upfront and the remaining 70% before shipment.
C: For larger orders, 100% Irrevocable LC at sight.
Q8: Can you produce DDQ (Deep Drawing Quality) materials?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, and more. Just let us know your specific usage, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I get a sample?
A: We provide FREE samples for your evaluation and testing. For small pieces, we can cover the courier cost depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, the UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}