| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plates boast exceptional ductility and cold formability, making them perfect for deep drawing. Known for outstanding general and seawater corrosion resistance, Grade 1 titanium excels in oxidizing, neutral, and mildly reducing environments, including chlorides. With its low density (approximately half that of nickel-based alloys) and high strength-to-weight ratio, titanium is a top choice for harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent cold formability, superb corrosion resistance, commendable weldability, and impressive impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates, Suppliers of Titanium Grade 1 Sheets, Dealers of Titanium Grade 1 Finished Plates, Providers of ASTM B265 Titanium Grade 1 Coils, Manufacturers of Pure Titanium Grade 1 Hot Rolled Plates, Experts in Titanium Grade 1 Cold Rolled Plates, Merchants of Titanium ASTM B265 Grade 1 Sheets, Distributors of Grade 1 Titanium Patterned Plates, Vendors of Titanium Grade 1 Perforated Plates, and Leading Manufacturers in China for Titanium Grade 1 Sheets and Plates.
We deliver Grade 1 titanium plate products with exceptional speed and efficiency. Behind this swift service lies robust support from production capacity, seamless information flow, logistics, and capital flow. For instance, Daxun's order data integrates in real-time with the logistics system, enabling seamless data connectivity. Strategically located processing centers ensure efficient scheduling and rapid response. Proximity to highways, rivers, and seas facilitates swift storage, transportation, and loading, ensuring timely completion of tasks.
Grade 1 titanium plates, with their lower density and superior ductility, are indispensable for industries prioritizing weight and deep drawing processes. Critical sectors include medical, chemical equipment, and aerospace. The strength and corrosion resistance of Grade 1 titanium make it ideal for marine, chemical processing, and desalination applications. Prominent uses encompass oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Adhering to standards like ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972 ensures top-notch quality.
The cold-rolled thickness range for Grade 1 Titanium Plates spans from 0.3 mm to 6.0 mm. These plates can be supplied in hot rolled or heat-treated conditions. The hot-rolled thickness range extends from 4.76 mm to 155 mm. Production involves both longitudinal and transverse rolling, with the option of heat treatment like creep flattening to relieve internal stresses and meet specific flatness requirements. Plates can also be supplied as cut blanks for further mechanical or chemical processing based on customer requirements.
About the chemical composition of (Ti 6AL-4V) Grade 5 titanium sheets
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titanium sheets
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheets
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large titanium plate projects. As your paramount reference point and steadfast long-term partner, DAXUN stands ready to supply your business with high-quality titanium plates and provide any essential technical assistance. Consider DAXUN not just as a supplier of industrial pure titanium plates and titanium alloy plates, but as a strategic ally dedicated to helping you overcome any challenges and meet all your needs. Partnering with DAXUN ensures you achieve your project goals with unparalleled precision and efficiency.
DAXUN's state-of-the-art service center in China maintains a robust inventory of titanium plate products, facilitating rapid order processing. Through foundational processing techniques, advanced water jet cutting, and precise plate nesting products, we deliver exceptional value to our customers, significantly saving time and reducing costs.
DAXUN's unwavering commitment to continuous investment in production facilities, coupled with strategic capacity agreements with our partners, solidifies our position at the forefront of titanium plate quality, both now and in the future.
Reach out to DAXUN today to obtain the most up-to-date titanium plate prices and comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a prominent name in the titanium industry, specializes in manufacturing and supplying Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China. Our mission is to deliver the world's highest-performance titanium alloy plates. With rapid worldwide delivery, we stock ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 titanium plates (UNS R56400), available in thicknesses from 0.5mm to 300mm, are renowned for their exceptional strength, ductility, and superior corrosion and high-temperature resistance. These plates are cold-rolled (0.5mm-6.0mm), hot-rolled (6.0-50mm), and forged (50mm and above). The versatility of Grade 5 titanium, often termed the 'workhorse' of titanium alloys, makes it a preferred material in both general and military applications. Our products comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates find extensive applications in aerospace, military sectors, power industries, vehicle armor, precision rocket guidance parts, marine industries, and beyond.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plates are celebrated for their excellent ductility and cold formability, making them ideal for deep drawing applications. Known for superior corrosion resistance in general and seawater environments, as well as against oxidizing, neutral, and mildly reducing media including chlorides, Grade 1 titanium boasts low density, high strength-to-weight ratio, and exceptional corrosion resistance. As the softest and most ductile grade, it offers excellent weldability, cold formability, and impact hardness, making it a versatile choice for numerous chemical and industrial settings.
We are premier producers and suppliers of ASTM B265 Titanium Grade 1 plates, offering a range of options including Titanium Grade 1 Sheets, finished plates, coils, hot and cold rolled plates, patterned and perforated plates. Renowned for their purity and quality, our Grade 1 titanium products are ideal for various applications and are available from our facilities in China.
Grade 2
DAXUN offers a comprehensive range of commercially pure titanium plates, specifically Grade 2 (UNS R50400), with thicknesses from 0.5mm to 120mm. Known as the 'workhorse' of pure titanium, Grade 2 combines high strength, ductility, and outstanding corrosion resistance, making it suitable for a multitude of industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium, is praised for its excellent balance of strength and ductility, making it easily weldable and highly resistant to corrosion in oxidizing environments, alkaline media, brine solutions, weakly reducing settings, and wet ***. Additionally, it offers exceptional seawater and salt solution resistance.
Titanium's advantageous properties, such as low density, high strength-to-weight ratio, and remarkable corrosion resistance, make it ideal for myriad applications. Grade 2 Titanium Plate, with a melting point of 1660°C, excels in resisting stress corrosion cracking, pitting, and crevice corrosion, especially in chloride solutions below 70°C, making it a preferred choice for demanding industrial applications.
DAXUN stands out as a metal expert, adept at handling both small and large titanium plate projects. As your trusted partner, DAXUN offers not only high-quality industrial pure titanium and titanium alloy plates but also comprehensive technical support. Consider DAXUN your strategic ally, ready to help you navigate any challenges and meet your project objectives with precision and excellence.
DAXUN's premier service center in China boasts a comprehensive inventory of titanium plate products, ensuring lightning-fast order processing. With our state-of-the-art basic processing, precision water jet cutting, and efficient plate nesting capabilities, we deliver unrivaled added value to our customers, significantly reducing their time and costs.
DAXUN's unwavering commitment to continuous investment in our cutting-edge production facilities, along with strategic capacity agreements with our esteemed partners, guarantees that DAXUN remains the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to discover the most competitive titanium plate prices and obtain detailed technical information, tailored to meet your specific needs.
Q1: What products can you offer?
A: We offer a variety of steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and
400 series. Additionally, we provide duplex stainless steel including 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products according to your drawings to ensure complete satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize rigorous quality control from the start to the finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation form based on your request,
though you will need to cover any additional costs and differential expenses incurred during this period.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize rigorous quality control from the start to the finish.
Q6. How long is the delivery time?
A: Delivery takes 7~20 working days after payment confirmation.
For urgent orders, we will expedite the process to complete it sooner.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union (for small orders).
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Let us know your specific use, and we will adjust the mechanical properties accordingly.
Q9: How to get a sample?
A: FREE samples are available for your inspection and testing. If a small piece is required, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}