| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN proudly manufactures and maintains an extensive inventory of commercially pure titanium plates in grades Gr1, Gr2, Gr3, and Gr4 (UNS). With thicknesses ranging from 0.5 mm to 120 mm, these titanium plates are the cornerstone of the commercially pure titanium family. They seamlessly blend high strength, remarkable ductility, and unparalleled corrosion resistance, making them indispensable for a multitude of industrial applications.
The Gr1, Gr2, Gr3, and Gr4 titanium plates are epitomes of commercially pure titanium excellence. They strike a perfect balance between strength and ductility, boasting impressive impact strength and weldability. These plates offer robust corrosion resistance in highly oxidative environments, alkaline media, brine solutions, mildly reducing environments, and moist ***. Additionally, they exhibit outstanding resistance to seawater and saline solutions.
The Gr5 Grade 5 Ti-6Al-4V titanium plate is a marvel of titanium alloy engineering. Comprising 90% titanium, 6% aluminum, and 4% vanadium, this α-β type titanium alloy benefits from aluminum's stabilization of the α phase and vanadium's stabilization of the β phase. This plate is renowned for its excellent overall performance and process efficiency. TC4 titanium alloy exhibits remarkable strength at both room and elevated temperatures, superior creep resistance, and thermal stability. It excels in fatigue performance and *** growth resistance in marine environments, with satisfactory fracture toughness and hot salt stress corrosion resistance. The Gr5 Ti-6Al-4V titanium alloy plate is also known for its outstanding process plasticity and superplasticity, making it ideal for diverse processing methods, including various welding and machining techniques.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-rolled Titanium Plate: Crafted meticulously through plate rolling, our cold-rolled titanium plates undergo a final cold rolling step. These sheets are available in either work-hardened or heat-treated conditions, tailored to your precise specifications. Further mechanical or chemical processing can be customized as per your requirements. 2. Hot-rolled Titanium Plate: Our hot-rolled titanium plates are produced through both longitudinal and longitudinal-transverse rolling, with thicknesses ranging from 3.0mm to 155mm. Supplied in a heat-treated condition, they can undergo creep flattening to eliminate internal stress and meet special flatness requirements. These sheets can also be provided as cut blanks, featuring complex shapes tailored from the parent metal. Further customization is available based on your needs.3. Forged Titanium Plate: Our forged titanium plates are produced by forging steel ingots on a vertical hydraulic press, followed by rolling, open die forging, or a combination of both. Standard slab dimensions include thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. Specific dimensions and weights can be customized through agreements between manufacturer and customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a renowned Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With an unwavering commitment to creating the world's highest-performance titanium alloy plates, we ensure expedited global deliveries. Our product range meets the ASTM B265 standards for Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a comprehensive inventory of Grade 5 (UNS R56400) alloy titanium plates, available in thicknesses from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold rolled, 6.0mm to 50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is celebrated as the versatile 'workhorse' of titanium alloys, offering unmatched strength, ductility, and resistance to corrosion and high temperatures. This makes it a preferred choice across various general and military industries. Our products comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 Titanium Plate is predominantly utilized in aerospace, military, power, vehicle armor, rocket precision guidance systems, and marine industries.
Grade 1
Today, DAXUN Alloys is a premier global producer and supplier of top-tier Grade 1 Titanium Plates.
Pure Grade 1 Titanium Plate boasts excellent ductility and cold formability, making it perfect for deep drawing applications. Renowned for its outstanding general and seawater corrosion resistance, it also excels in resisting oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density (approximately half that of nickel-based alloys), combined with a high strength-to-weight ratio and superior corrosion resistance, makes it an ideal choice for demanding chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile titanium grade, offering exceptional cold formability, superb corrosion resistance, excellent weldability, and good impact hardness.
We are esteemed ASTM B265 Titanium Gr 1 Plate Producers, offering a comprehensive range of Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. As leading manufacturers in China, we ensure top-quality titanium products that meet diverse industrial needs.
Grade 2
DAXUN excels in producing and stocking commercially pure titanium plates of Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is celebrated as the 'workhorse' of the commercially pure titanium family, offering a superior blend of strength, ductility, and corrosion resistance suitable for numerous industrial applications.
Grade 2 Titanium Plate is a type of commercially pure titanium, striking an excellent balance between strength and ductility. It is known for its robust impact strength, ease of weldability, and remarkable corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it exhibits excellent resistance to seawater and salt solutions.
Titanium's inherently low density, high strength-to-weight ratio, and exceptional corrosion resistance make it an optimal material for various applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions at temperatures below 70°C. With a melting point of 1660°C, it is the preferred alloy for industrial applications demanding superior ductility and corrosion resistance.
DAXUN stands as a trusted metal expert specializing in both small and large titanium plate projects. As your reliable reference point and long-term partner, we are committed to providing top-quality titanium plates and comprehensive technical assistance. DAXUN is not merely your supplier of industrial pure titanium and titanium alloy plates; we are your strategic partner, dedicated to helping you overcome challenges and achieve your project aspirations.
At DAXUN's premier service center in China, we pride ourselves on having an extensive stock of titanium alloy plates, ready to fulfill orders with unparalleled speed. Our array of basic processing services, state-of-the-art water jet cutting, and meticulous plate nesting deliver exceptional added value. This means significant time and cost savings for our valued customers.
DAXUN continually invests in advanced production facilities and forges strategic capacity agreements with our partners. These efforts guarantee that we remain at the cutting edge of titanium plate manufacturing, ensuring top-tier quality today and into the future.
Reach out to DAXUN today to access the most competitive prices and the latest technical specifications for our titanium alloy plates. Experience firsthand the superior quality and service that sets us apart.
Q1: What products can you offer?
A: We offer a variety of steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and 300 series.
400 series, duplex stainless steel like 2205, 2304, 2101, 2507, and high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products based on your drawings to meet your specific requirements.
Q3. How does your factory do regarding quality control?
Quality is our priority. We consistently maintain stringent quality control from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can alter the packaging and transportation according to your request.
However, you will need to cover any additional costs incurred during this process.
Q5. How does your factory do regarding quality control?
Quality is our top concern. We implement rigorous quality control measures throughout production.
Q6. How long is the delivery time?
A: Delivery time is 7-20 working days after payment confirmation.
For urgent orders, we expedite production to meet your timelines.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union (for small orders).
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Share your requirements, and we will tailor the mechanical properties accordingly.
Q9: How to get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which country have you exported to?
A: We have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange your pick-up.
){kind=link}