Customization: | Available |
---|---|
Type: | Stainless Steel Bars |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Parameters: Stainless Steel rod | |
Material | 2507 S32750 |
Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Round Bars | Outside Diameter in the range of 4mm to 500mm |
Bright Bars | Outside Diameter in the range of 4mm to 100mm |
Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | 1 to 6 Meters, Custom Cut Lengths |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
Laboratory Test Certificate from Govt. Approved Lab. | |
Under Third Party Inspection | |
Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
ASTM A276 Super Duplex Steel S32750 Round Bar, Super Duplex Steel Bar Supplier, Super Duplex Steel UNS S32760 Bright Bar, Super Duplex Steel 2507 Bar, Super Duplex Steel UNS S32950 Flat Bar, Austenitic Super Duplex Steel S32760 Round Bar, Hot Rolled Super Duplex Steel S32760 Round Bar, Super Duplex Steel S32760 Round Bar, Super Duplex Steel UNS S32750 Manufacturer from China.
For more information on stainless steel rods, please contact Daxun.
2507 Stainless Steel Rod chemical composition
Grade | Super Duplex 2507 |
UNS Designation | S32750 |
Carbon (C) Max. | 0.03 |
Manganese (Mn) Max. | 1.2 |
Phosphorous (P) Max. | 0.035 |
*** (S) Max. | 0.02 |
Silicon (Si) Max. | 0.8 |
Chromium (Cr) | 24.0-26.0 |
Nickel (Ni) | 6.0-8.0 |
Molybdenum (Mo) | 3.0-5.0 |
Nitrogen (N) | 0.24-0.32 |
Iron (Fe) | Bal. |
Copper (Cu) | 0.5 |
Other Elements | - |
Physical Properties of Super Duplex 2507 Alloys in the Annealed Condition at -20°F to +100°F | ||||||||||||||
Tensile Strength | Yield Strength | |||||||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 in. (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ ft2-h-°F) |
Super Duplex 2507 | S32950 | A789, A790 | 100,000 | 690 | 100 | 70,000 | 485 | 70 | 20 | - | 30.5 Rc | - | - | - |
Super Duplex 2507 | S32750 | A789, A790 | 116,000 | 800 | 116 | 80,000 | 550 | 80 | 15 | - | 32 Rc | 27.5 | 7.2 | 98 |
Density, lb/in3 | 0.28 |
Modulus of Elasticity, psi | 29.0x 106 |
Coefficient of Thermal Expansion, 68-212˚F, /˚F | 7.5 x 10-6 |
Thermal Conductivity, Btu/ft hr ˚F | 8 |
Specific Heat, Btu/lb ˚F | 0.12 |
Electrical Resistivity, Microhm-in | 31.5 |
Our forming capabilities include cutting-edge radial forging machines, advanced heat treatment furnaces, top-tier melting furnaces, and precision rolling mills for manufacturing titanium rods. We also employ a unique hydroforming process for specialized parts.
Our stainless steel rod heat treatment process uses advanced furnace equipment to ensure material stability and high performance.
Daxun Stainless Steel employs the world's most advanced vacuum induction furnaces, vacuum consumable furnaces, and electroslag furnaces. These technologies significantly reduce impurities during the smelting process, improving the performance of the finished stainless steel rods.
At Jiangsu Daxun Alloy Co., Ltd., our stainless steel products are fully certified and traceable, ensuring top-tier quality. We proudly supply the finest stainless steel to leading industries including aerospace, industrial, medical, marine, and military sectors.
Tensile Strength | Yield Strength | |||||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
Grade | Tensile Str | Yield Str | Elong | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
316 | 515 | 205 | 40 | 95 | 217 |
316L | 485 | 170 | 40 | 95 | 217 |
316H | 515 | 205 | 40 | 95 | 217 |
Tensile Strength | Yield Strength | ||||||||
Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
(MPa) min | 0.2% Proof | (% in 50mm) min | |||
(MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
Grade | Property | Value |
2507/ S32750 |
Density (g/cm3) | 7.8 |
0.2% Offset Yield Strength | 80 ksi | |
Ultimate Tensile Strength | 116 ksi | |
0.1% Offset Yield Strength 0.2% | 91 ksi | |
Elongation in 2 inches, % | 15% | |
Hardness Rockwell C | 32 | |
Impact Energy | 74 ft.-lbs | |
Density | 0.28 lb per inch3 | |
Modulus of elasticity | 28 x 10(6) psi | |
Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
Thermal conductivity | 8.7 Btu/hr ftoF | |
Heat capacity | 0.12 Btu/ lb oF | |
Electrical resistivity | 31.5 x10(-6) ohm-inch |
Can you provide SS grinding bars and rods?
Absolutely! We specialize in SS grinding bars and rods that boast precise dimensions, exceptional roundness, and impeccable straightness, surpassing the quality of standard stainless steel polished bars. However, please note that the processing cost is higher for these premium products.
Q1: What products can you offer?
A: We offer a comprehensive range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L.
Additionally, we provide an extensive selection of 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products precisely according to your drawings, ensuring your complete satisfaction.
Q3. How does your factory manage quality control?
Quality is our top priority. We maintain stringent quality control measures from the inception of production to the final stages.
Q4. Can I request changes to the packaging and transportation methods?
Yes, we can adjust the packaging and transportation methods as per your requests.
However, you will be responsible for any additional costs and price differences incurred during this period.
Q5. How does your factory manage quality control?
Quality is our top priority. We maintain stringent quality control measures from the inception of production to the final stages.
Q6. What is the delivery time?
A: Standard delivery time is 7-20 working days after payment confirmation.
For urgent orders, we can expedite the production process to meet your timeline.
Q7. What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T in advance, with a 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) material?
A: Yes, we can. Our DDQ materials are ideal for manufacturing stainless steel pots, sinks, bowls, etc. Share your specific requirements, and we will adjust the mechanical properties to fulfill your needs.
Q9: How can I get a sample?
A: We offer FREE samples for your evaluation and testing. For small pieces, we can also cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported our stainless steel materials to several countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and others.