| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With the goal of creating the world's high-performance titanium alloy plates. We deliver quickly worldwide - ASTM B265 Grade 2, Grade 5 Titanium Plates. DAXUN produces and stocks alloy titanium plates Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm is cold rolled. 6.0-50mm is hot rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) is the "workhorse" of titanium alloy materials. It combines high strength, ductility and excellent corrosion resistance, high temperature resistance, thus being favored by many general and military industries. Compliant with: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V grade 5 titanium plate contains 90% titanium, 6% aluminum and 4% vanadium. It is an α-β titanium alloy in which aluminum stabilizes the α phase and vanadium stabilizes the β phase. The main features of Ti-6Al-4V titanium alloy plate are excellent comprehensive performance and good process performance. TC4 titanium alloy has excellent room temperature and high temperature strength, good creep resistance and thermal stability, high fatigue performance and *** growth resistance in seawater, as well as satisfactory fracture toughness and hot salt stress corrosion performance. Ti-6Al-4V titanium plate also has excellent process plasticity and superplasticity, suitable for various processing methods, and various ways of welding and machining.
Ti-6Al-4V grade 5 titanium plate is mainly used in aerospace, military industry, power industry, vehicle armor, rocket precision guidance parts, marine industry, etc.
Grade 5 titanium alloy plate is the most commercially available of all titanium alloys. It combines high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy has good comprehensive properties:
Ti-6AL-4V titanium plates and sheets are mainly used for parts that require corrosion resistance, stress corrosion resistance and high strength (400-450°C), with good ductility and lateral strength. 1. Jet engine compressor blades, disks and rings, fuselage components such as wings, fuselages, turbine disks, doors, bulkheads, military aircraft and hardware heat shields, engine nozzles, landing gear doors, fuselage superplastic forming parts, etc. 2. Military applications include: armor, guidance, shell casings, etc. 3. Spacecraft components, including ***s and heat shields, etc. 4. Medical and surgical instruments. 5. Sports equipment, including bicycle frames and golf clubs. 6. Other uses that require a high strength-to-weight ratio.
Daxun conducts multiple quality assurance tests, these tests include flattening test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the material is suitable for the required application. During the production process, we measure the diameter, thickness and surface of the product. Our standard delivery time is 5-7 days, and the delivery time for special size products is 15-20 days.
Discover the intricate details of the chemical composition of our premium (Ti 6AL-4V) Grade 5 Titanium Alloy Sheet. This exceptional material exemplifies superior alloying elements to ensure optimal performance.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Unveil the precise chemical composition of our reliable Grade 2 Titanium Sheet, meticulously designed for durable and high-performing applications.Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Dive into the mechanical properties that set our Grade 2 Titanium Sheet apart, perfectly engineered for robustness and versatility. Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished authority in the realm of metal expertise, dedicated to both small and large titanium plate ventures. As your go-to reference and steadfast partner, DAXUN stands ready to supply your business with premium titanium plates and comprehensive technical support. Beyond being a mere supplier of industrial pure titanium and titanium alloy plates, DAXUN emerges as your strategic ally, poised to surmount any challenges and cater to your needs, thereby empowering you to reach your project goals with finesse.
With a dedicated service center in China, DAXUN ensures swift order processing for our titanium plate offerings. By leveraging basic processing, water jet cutting, and plate nesting services, we deliver exceptional added value, streamlining operations, and significantly reducing time and costs for our esteemed customers.
DAXUN's unwavering commitment to continuous investment in advanced production facilities, coupled with strategic capacity agreements with our partners, fortifies DAXUN's position at the pinnacle of titanium plate quality - both today and in the future.
Reach out to DAXUN today to discover the latest titanium plate prices and access detailed technical information to enhance your business decisions.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
At DAXUN, we pride ourselves on being a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 alloy titanium plates in China. Our mission: to pioneer high-performance titanium alloy plates globally. We ensure swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 (UNS R56400) inventory spans thicknesses from 0.5mm to 300mm: cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm+). Grade 5 titanium (Ti-6Al-4V), the 'workhorse' of titanium alloys, offers a rare blend of high strength, ductility, and exceptional corrosion and high-temperature resistance. This makes it indispensable in both general and military sectors. Compliance: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Our Ti-6Al-4V Grade 5 titanium plates find extensive applications across aerospace, military, power industry, vehicle armor, rocket precision guidance, and marine sectors.
Grade 1
Jiangsu Daxun Alloy Co., Ltd. is celebrated as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates from DAXUN offer outstanding ductility and cold formability, making them ideal for deep drawing. Known for excellent resistance to general and seawater corrosion, as well as oxidizing, neutral, and mildly reducing media (including chlorides), Grade 1 titanium boasts a low density (about half that of nickel-based alloys), superior strength-to-weight ratio, and corrosion resistance. This makes it the material of choice for diverse harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, with exceptional cold formability, corrosion resistance, weldability, and impact hardness.
We are producers of ASTM B265 Titanium Gr 1 Plate, offering Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. Jiangsu Daxun Alloy Co., Ltd. is your go-to manufacturer and supplier of Titanium Grade 1 Sheets and Plates in China.
Grade 2
DAXUN specializes in producing and stocking commercially pure Grade 2 titanium plates (UNS R50400), with thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 offers a perfect blend of high strength, ductility, and outstanding corrosion resistance for various industrial applications.
Grade 2 Titanium Plates offer an optimal balance of strength and ductility, with excellent impact strength and weldability. They resist corrosion in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Their resistance to seawater and salt solutions makes them invaluable in demanding environments.
With a low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is optimal for a wide range of applications. Grade 2 Titanium Plates effectively combat stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it's the alloy of choice for industrial applications demanding good ductility and corrosion resistance.
DAXUN stands as a metal expert for both small and large titanium plate projects. We are your reliable partner, offering not just industrial pure titanium plates and titanium alloy plates, but comprehensive technical assistance too. Think of DAXUN as your strategic partner, helping you navigate challenges and meet your project goals with precision.
Experience the seamless efficiency of DAXUN's service center in China, where we maintain a robust stock of titanium plate products for lightning-fast order fulfillment. Our value-added services, including precise water jet cutting and expert plate nesting, are designed to save our customers significant time and costs, ensuring maximum efficiency in every project.
At DAXUN, we believe in continuous growth and innovation. Our unwavering investment in advanced production facilities, combined with strategic capacity agreements with our partners, places us at the pinnacle of titanium plate quality-both now and in the future. Trust DAXUN for unparalleled excellence and consistency.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical insights. Allow us to provide you with the cutting-edge information and exceptional products you need to succeed.
){kind=link}