| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a premier global producer and supplier of high-quality, Grade 1 titanium plates, renowned for their unparalleled purity and performance.
Pure Grade 1 titanium plates from Daxun offer exceptional ductility and cold formability, making them perfect for deep drawing applications. Known for superior resistance to general and seawater corrosion, and resilience against oxidizing, neutral, and mildly reducing media, including chlorides, Titanium Grade 1's low density-about half that of nickel-based alloys-combined with a high strength-to-weight ratio, makes it an optimal choice for demanding chemical environments. This commercially pure titanium is the softest and most ductile of its kind, offering outstanding weldability, good impact resistance, and excellent cold formability.
Producers of ASTM B265 Titanium Grade 1 Plates, Sheet fabricators of Titanium Grade 1, Suppliers of Titanium Grade 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Providers, Manufacturers of Pure Titanium Grade 1 Hot Rolled Plates, Cold Rolled Titanium Gr 1 Plates, Distributors of Titanium ASTM B265 Gr 1 Sheets, Dealers of Gr 1 Titanium Patterned Plates, Providers of Titanium Gr 1 Perforated Plates, and Manufacturers of Titanium Grade 1 Sheets and Plates in China.
We ensure fast, timely delivery of Grade 1 titanium plates, backed by an integrated system spanning production capacity, information flow, logistics, and capital flow. For instance, Daxun's order data is seamlessly pushed to the logistics system in real-time, ensuring efficient and effective tracking. Our processing center's strategic location near highways, rivers, and seas, combined with meticulous scheduling and rapid response, guarantees efficient storage, transportation, and on-time completion of tasks.
Grade 1 titanium plates have a lower density and are highly ductile, making them ideal for weight-sensitive industries and deep drawing processes. Key sectors include medical, chemical equipment, and aerospace industries. The strength and corrosion resistance of Grade 1 titanium make it perfect for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, flue gas desulfurization systems, and a myriad of other industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972.
Grade 1 Titanium Plates are available in cold-rolled thicknesses from 0.3mm to 6.0mm and hot-rolled or heat-treated thicknesses from 4.76mm to 155mm. These plates are produced through longitudinal and transverse rolling processes and can also undergo creep flattening to relieve internal stresses and meet specific flatness requirements. Plates can be supplied as cut blanks with complex shapes tailored to customer specifications through mechanical or chemical processing.
About the chemical composition of (Ti 6AL-4V) Grade 5 Titanium Sheets
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is renowned as a leading authority in the realm of both small and large-scale titanium plate projects. As your premier reference point and dedicated long-term partner, DAXUN is poised to deliver not only high-quality titanium plates but also comprehensive technical assistance tailored to your business needs. More than just a supplier of industrial pure titanium and titanium alloy plates, DAXUN stands as your strategic ally, ready to help you overcome any challenges and fulfill your project aspirations.
DAXUN's service center in China boasts a well-stocked inventory of titanium plate products, enabling quick and efficient order processing. We offer enhanced value through basic processing, precise water jet cutting, and expert plate nesting services, all designed to save you time and reduce costs.
DAXUN's unwavering commitment to continuous investment in production facilities, coupled with strategic capacity agreements with our partners, ensures that we remain at the pinnacle of titanium plate quality, now and into the future.
Reach out to DAXUN today for the most competitive titanium plate prices and the latest technical insights.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, your premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, is committed to creating the world's most advanced titanium alloy plates. With rapid delivery worldwide, our offerings include ASTM B265 Grade 2 and Grade 5 Titanium Plates. We stock Grade 5 titanium plates (UNS R56400), with thicknesses from 0.5mm to 300mm-cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm and above). Renowned as the 'workhorse' of titanium alloys, Grade 5 titanium (Ti-6Al-4V) boasts high strength, ductility, excellent corrosion resistance, and remarkable high-temperature resistance, making it indispensable in both general and military industries. Our plates meet rigorous standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates are primarily utilized in aerospace, military, power industries, vehicle armor, precision rocket guidance parts, marine industries, and more.
Grade 1
DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
The Pure Grade 1 titanium plate, known for its outstanding ductility and cold formability, is ideal for deep drawing applications. Its exceptional general and seawater corrosion resistance, coupled with resistance to oxidizing, neutral, and mildly reducing solutions (including chlorides), makes it highly versatile. With a low density and a high strength-to-weight ratio, Grade 1 titanium is perfect for harsh chemical environments. It is the softest and most ductile commercially pure titanium, offering excellent cold formability, corrosion resistance, weldability, and impact hardness.
As one of the premier ASTM B265 Titanium Gr 1 Plate Producers, we offer a wide range of Titanium Gr 1 products, including Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. Available in China, our products meet the highest standards of quality and reliability.
Grade 2
DAXUN is dedicated to producing and stocking commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of commercially pure titanium, Grade 2 offers a superb blend of strength, ductility, and corrosion resistance, suitable for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an excellent balance of strength and ductility. It boasts good impact strength, is easily weldable, and showcases good corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also offers excellent resistance to seawater and salt solutions.
Titanium's inherent low density, high strength-to-weight ratio, and excellent corrosion resistance make it a prized material for various applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C, with a melting point of 1660°C, making it the ideal alloy for industrial applications demanding exceptional ductility and corrosion resistance.
DAXUN is your metal expert for both small and large titanium plate projects. Serving as your long-term partner, we are ready to provide top-tier titanium plates and any technical assistance you may need. DAXUN is not just a supplier of industrial pure and alloy titanium plates, but a strategic partner committed to helping you navigate challenges and meet your project objectives effectively.
At DAXUN's premier service center in China, we maintain an extensive inventory of titanium plate products, poised for rapid order fulfillment. Our suite of fundamental processing services, including precision water jet cutting and efficient plate nesting, adds remarkable value for our clients, effectively optimizing both time and cost.
Through relentless investment in state-of-the-art production facilities and strategic capacity agreements with our esteemed partners, DAXUN consistently leads the industry in titanium plate quality, ensuring unparalleled excellence today and in the years to come.
Reach out to DAXUN today to discover the most competitive titanium plate prices and access comprehensive technical insights.
Q1: What products can you offer?
A: We provide a comprehensive portfolio of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, as well as
400 series, and duplex stainless steel such as 2205, 2304, 2101, 2507, etc. Additionally, we offer high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products precisely according to your drawings, ensuring they meet your utmost satisfaction.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control measures from inception to completion.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can modify packaging and transportation methods based on your specific requests; however,
you will need to cover the additional costs and any price variations incurred during this period.
Q5: How does your factory handle quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control measures from inception to completion.
Q6: How long is the delivery time?
A: Typically, delivery takes 7 to 20 working days after payment confirmation.
If the order is urgent, we can expedite the process to meet your deadline.
Q7: What are your payment terms?
A: Options include 100% T/T in advance, Western Union for small orders, or
30% T/T upfront with the remaining 70% due before shipment,
and 100% Irrevocable LC at sight for large orders.
Q8: Can you provide Deep Drawing Quality (DDQ) materials?
A: Yes, we specialize in DDQ materials ideal for stainless steel pots, sinks, and bowls. Inform us of your application, and we'll tailor the mechanical properties to suit your needs.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. For small pieces, we may cover the courier costs, depending on the situation.
Q10: To which countries have you exported your products?
A: We have successfully exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}