| Customization: | Available |
|---|---|
| Type: | Titanium Bars |
| Application: | Industrial, Medical, Chemical Industry, Aviation |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Material | Titanium rod and bar Grade 1 (UNS R50250) |
| Standard | ASTM B348, ASTM SB348, AMS 4921, AMS 4902 |
| Dimensions | EN, ASTM, JIS, ASME, BS, AISI |
| Diameter Range | 0.125″ - 14″ (3.175mm - 355.6mm), custom |
| Length Range | Up to 240″ (6096mm), custom |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Surface Finish | Cold drawn, Centerless Ground, Polished, Or Rough Turned, Black, NO.4 Finish, BA Finish, Matt Finish, etc. |
| Condition | Hardened & tempered, annealed |
| Tolerance | Diameter tolerance: +/- 0.005″ (0.127mm), length tolerance: +/- 0.125″ (3.175mm) |
| Form | Titanium square bars, titanium ingots, titanium round bars, rectangular titanium bars, triangular titanium bars, forged titanium bars, titanium hexagonal bars, etc. |
Titanium round bars stand as among the most cherished products from Daxun Alloy China. The crafting of Grade 1 Titanium bars is notably automated in contrast to the fabrication of blocks and plates. These bars come in over forty distinctive grades, with Grade 5, Grade 2, and Grade 1 topping the popularity charts. Available in diameters reaching up to 14 inches, Pure Titanium Grade 1 is celebrated for its superior ductility and cold formability, ideal for deep drawing. Renowned for its exceptional resistance to general corrosion, seawater corrosion, and resistance to oxidizing, neutral, and mildly reducing media like chlorides, Titanium's low density-about half that of nickel-based alloys-combined with its high strength-to-weight ratio and corrosion resistance, makes it an optimal choice for numerous demanding chemical environments.
Distinct Characteristics of DAXUN® Ti Grade 1 Commercially Pure (CP) Titanium Bars:
Daxun excels in producing titanium bars of the highest quality and performance, tailored to meet customer requirements:
Daxun rigorously conducts several quality assurance tests including area tensile, chemical analysis, PMI test, micro and macro testing, intergranular corrosion (IGC) test, ultrasonic flaw detection, pitting resistance test, hardness test, expansion test, and more. These stringent tests certify the suitability of Grade 2 Titanium Rods and Round Bars for their intended applications, ensuring precise measurements of diameter, thickness, and surface quality throughout the production process.
Chemical Composition Insights of (Ti 6AL-4V) Grade 5 Titanium Rods
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition Details of Grade 2 Titanium Rods
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties Insights of Grade 2 Titanium Rods
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
Daxun Alloys proudly stocks a comprehensive range of Titanium Rods including Grade 1, Grade 2, and Grade 5 in various diameters to perfectly match your project's unique requirements, from general industrial applications to advanced military aerospace needs. Whether you need sizes from a delicate 1mm diameter up to a robust 300mm diameter, we have you covered. Seeking larger sizes? Custom orders are our specialty, and we invite you to contact Daxun for a personalized quote. Our Titanium Rods strictly adhere to ASTM B348 and ASTM B381 standards, ensuring the highest quality. Don't hesitate to reach out to Daxun for your purchase; we offer superior pure titanium rods and titanium alloy rods and are delighted to provide expert advice tailored to your needs.
At Daxun, we pride ourselves on our complete technology cycle, meticulously transforming raw materials into finished products with exceptional mechanical processing. Our extensive bar product inventory is strategically stocked throughout our service center network, ensuring fast, off-the-shelf delivery of common sizes and alloys. For those with unique needs, we provide custom manufacturing and can establish stocking programs that guarantee quick turnaround on a just-in-time basis, even for quantities below mill minimums. Experience the seamless efficiency and superior quality of Daxun's titanium products.
| CP GR1 Titanium rods PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium rods PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium rods PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
Daxun At Jiangsu Daxun Alloy Co., Ltd., we take pride in producing highly competitive, high-precision Grade 1 titanium bars within our state-of-the-art production facilities in China. Our titanium bars boast excellent surface finish, tolerance, straightness, and overall material quality, ensuring technological leadership and consistent production processes. These superior qualities are maintained across a wide range of diameters and materials. Additionally, our comprehensive stocking program at our service center guarantees just-in-time delivery, meeting your needs efficiently.
We produce bars according to your specific requirements.
Our bars offer excellent surface quality and straightness, perfect roundness, and the tightest diameter tolerances (according to ISO 286-2 up to h5). They are available in straightened, ground, and polished conditions.
Sawing
Band saws (up to Ø510 mm)
Bench band saws (up to 6,000 x 3,000 x 400 mm)
High-performance sawing machines for precise cutting
Single or double-sided
Chamfer 90° (45°)
Point 60° (30°)
Flat end
Centered
ASTM American Society for Testing and Materials Standards
AMS American Aerospace Materials Standards
NACE American Association of Corrosion Engineers International Standards
ASME American Society of Mechanical Engineers Standards
GB Chinese National Standards
GJB Chinese National Military Standards
ISO International Standards
DIN German Standards
EN European Standards
API American Petroleum Institute Standards
Non-destructive testing > 100% testing
Testing methods
Eddy current testing / Eddy current *** testing
Defect-free surface (level 4)
Flat bottom hole diameter 0.7 mm and 0.4 mm
Blind area can be cut off according to fixed length > Test to the end of the bar
Full diameter ultrasonic testing
To ensure accurate and efficient processing, purchase orders should include details such as quantity, grade, type or category, API5L reference, and precise measurements (thickness, width, length). Additionally, specify any requirements related to chemical composition, mechanical properties, heat treatment, additional testing, manufacturing processes, surface coating, or end finishes. Contact Daxun now, and we will respond promptly.
Top-Quality Grade 5 Titanium Rod
Daxun boasts a state-of-the-art production facility in China, delivering highly competitive and precision-engineered Grade 5 titanium bars. Our superior surface finish, tolerance, straightness, and material quality assure you of technological leadership and consistency in production. These advantages span a diverse range of diameters and materials. Additionally, our extensive stock program at our service center enables just-in-time delivery to meet your needs efficiently.
AMS 4928 - Bars, Forgings, and Forging Stock (Annealed)
AMS 4965 - Bars, Forgings (Solution treated and aged)
AMS 4967 - Bars, Forgings (Annealed, Heat Treatable)
In the solution-treated and aged condition, rapid quenching of smaller sections yields optimum properties. Larger sections or delayed quenching might result in suboptimal properties.
Typical hardness in the annealed state is Rockwell C 30-34, while in the solution-treated and aged state, it ranges between Rockwell C 35-39.
The Ti-6Al-4V, Grade 5 alloy bar demonstrates commendable machinability when employing austenitic stainless steel machining techniques. Optimal results are achieved with slow machining speeds, high feed rates, robust tooling, and an abundant supply of non-chlorinated cutting fluids to ensure precision and longevity of the tools.
Easily weldable in both annealed and solution/partially aged conditions, the Ti-6Al-4V, Grade 5 alloy rod excels in fusion welding within an inert gas environment to shield the molten metal and adjacent heated zones. Spot, seam, and flash welding are viable without protective atmospheres, provided strict precautions are taken to prevent contamination from oxygen, nitrogen, and hydrogen, ensuring flawless weld quality and integrity.
Ti-6Al-4V, Grade 5 titanium alloy rod is susceptible to contamination from hydrogen during improper pickling and from oxygen, nitrogen, and carbon during forging, heat treating, and brazing. Such contamination can significantly reduce ductility, adversely impacting notch sensitivity and forming characteristics. Vigilant care is necessary to maintain material quality.
Custom bar production tailored to your specifications.
Exceptional surface quality, straightness, perfect roundness, and tight diameter tolerances (up to h5 as per ISO 286-2). Available in straightened, ground, and polished conditions.
Sawing
Band saws (up to Ø510 mm)
Bench band saws (up to 6,000 x 3,000 x 400 mm)
High-performance saw machines for precision cuts
Single or Double-sided finishes
Chamfer 90° (45°)
Point 60° (30°)
Flat End
Centered
ASTM American Society for Testing and Materials Standards
AMS American Aerospace Materials Standards
NACE: Setting the Benchmark for Corrosion Control Standards - American Association of Corrosion Engineers International Standards
ASME: Pioneering Mechanical Engineering Excellence - American Society of Mechanical Engineers Standards
GB: Ensuring Quality and Safety - Chinese National Standards
GJB: Precision in Defense - Chinese National Military Standards
ISO: Universal Quality Assurance - International Standards
DIN: Engineering Innovation - German Standards
EN: Harmonizing Quality Across Europe - European Standards
API: Leading Petroleum Industry Standards - American Petroleum Institute Standards
Non-Destructive Testing: Comprehensive and Reliable > 100% Testing
Advanced Testing Methods
Eddy Current Testing: Precision in Flaw Detection / Eddy Current *** Testing
Immaculate Surface Quality (Level 4)
Precision Testing: Flat Bottom Hole Diameter of 0.7 mm and 0.4 mm
Customizable Blind Area Elimination > Full-Length Bar Testing
Comprehensive Full Diameter Ultrasonic Testing
Include in your purchase orders: quantity, grade, type or category, API5L reference, thickness, width, length, and additional requirements related to chemical composition, mechanical properties, heat treatment, extra testing, manufacturing process, surface coating, or end finish. Contact Daxun now for a prompt response to your email.
Avoid using titanium with strong reducing acids, fluoride solutions, pure oxygen, or anhydrous ***.
General corrosion rates for Grade 2 titanium across various media are detailed in Table 1. CP titanium showcases excellent resistance to a wide range of environments including:
CP titanium offers superior resistance to crevice corrosion in salt solutions compared to stainless steels. It does not experience crevice corrosion below 80°C (176°F), regardless of pH, even in highly chlorinated conditions.
Grade 2 titanium exhibits exceptional resistance to stress corrosion cracking in hot chloride solutions and remains unaffected by SCC in seawater.
Titanium demonstrates outstanding resistance to erosion in flowing environments.
Seawater with velocities soaring up to 130 ft/sec (40 m/sec) demonstrates negligible impact on this exceptional material. Even in the presence of abrasive particles like sand, the corrosion resistance remains steadfast.
Titanium exhibits remarkable resistance to hydrogen absorption when exposed to seawater, even at elevated temperatures. Typically, hydrogen absorption only occurs under the following three critical conditions:
Titanium alloys boast unparalleled immunity against microbiologically influenced corrosion. Although they are non-toxic to marine life, biofouling can occur in seawater. This can be mitigated by chlorination or enhancing water velocity through heat exchangers.
Titanium stands out for maintaining its fatigue performance in the presence of seawater, unlike many other materials. Both the fatigue endurance limits and fatigue *** growth rates remain consistent, whether tested in air or seawater.
In the galvanic series, titanium positions itself towards the noble end, near stainless steels, often acting as the cathode when paired with other metals. Consequently, titanium evades galvanic corrosion but can accelerate the corrosion of the coupled metal. Pairing titanium with more noble metals like graphite enhances its inherent passivity.
Grade 2 Titanium Rod maintains its fatigue properties in seawater, unlike many other materials. The fatigue endurance limits and fatigue *** growth rates do not degrade, regardless of testing in air or seawater.
CP2 Grade Titanium Rod is highly weldable, provided necessary precautions are observed. Due to titanium's reactivity, an inert gas shield must be applied to both the OD and ID of the rod, and the material must be free from grease or oil contamination.
Typically, Grade 2 Titanium Rod is welded using manual or automatic TIG welding, with or without filler wire. Low heat input is recommended to minimize the heat-affected zone. Post-weld heat treatment is generally not required for Titanium Rod.
| Working material: | 3.7035 / UNS R50400 |
| Diameter: | 3 - 400 mm |
| Lengths: | 2.000 - 4.000 mm |
| Versions: | Rolled, forged, annealed |
| Surfaces: | Turned, peeled, polished |
| Standards: | ASTM B 348, ASME SB 348, DIN 17862, ASTM F 67, NACE MR 0175, ISO 1515156-3, ISO 5832-2 |
Searching for round rod material crafted from Grade 2 Titanium Alloy Rod-3,7035? At Jiangsu Daxun Alloy Co., Ltd., we offer customized titanium rods tailored to your requirements. As a seasoned supplier, we are prepared to support your project.
We provide Grade 2 Titanium bars in diameters ranging from 2.0 mm to 400 mm. Please note that execution and tolerances vary. Small diameters are delivered centerless ground with h7 tolerances, while larger diameters come with h9 or h11 tolerances.
When placing purchase orders, please include comprehensive details such as quantity, grade, type or category, API5L reference, and precise dimensions including thickness, width, and length. Be sure to specify any additional requirements related to chemical composition, mechanical properties, heat treatment, further testing, manufacturing process, surface coating, or end finish. Reach out to Daxun now-we are committed to responding to your email promptly to fulfill your needs.
Q1: What products can you offer?
A: We offer a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L 300 series.
Additionally, we provide 400 series and duplex stainless steels like 2205, 2304, 2101, 2507, as well as high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products according to your drawings, ensuring they meet your utmost satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We place great emphasis on rigorous quality control from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation forms to suit your requests.
However, please note that you will be responsible for any additional costs incurred during this process, including the price differences.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We place great emphasis on rigorous quality control from start to finish.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite production to meet your timeline.
Q7. What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you provide DDQ (Deep Drawing Quality) materials?
A: Yes, our materials are suitable for applications like stainless steel pots, sinks, and bowls. Inform us of your specific use, and we'll tailor the mechanical properties to your needs.
Q9: How can I get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover courier costs, depending on the situation.
Q10: To which countries have you exported?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}