| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Jiangsu Daxun Alloy Co., Ltd. produces and maintains a comprehensive stock of commercially pure titanium plates in grades Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses ranging from 0.5 mm to 120 mm. These grades are the workhorses of the commercially pure titanium family, offering a seamless blend of high strength, ductility, and exceptional corrosion resistance, making them indispensable for various industrial applications.
Our Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their perfect balance of strength and ductility. These commercially pure titanium plates boast excellent impact strength and weldability. They exhibit exceptional corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they offer superior resistance to seawater and salt solutions, thus ensuring longevity and reliability in harsh conditions.
The Gr5 Ti-6Al-4V titanium alloy plate, featuring 90% titanium, 6% aluminum, and 4% vanadium, is an α-β type titanium alloy. Here, aluminum stabilizes the α phase while vanadium stabilizes the β phase. Known for its outstanding comprehensive performance and excellent processing capabilities, the Gr5 Ti-6Al-4V titanium alloy plate provides exceptional room temperature and high-temperature strength, superb creep resistance, and thermal stability. Furthermore, it offers high fatigue performance and *** growth resistance in seawater, coupled with satisfactory fracture toughness and hot salt stress corrosion performance. The alloy's process plasticity and superplasticity make it ideal for various processing, welding, and machining methods.
Chemical Composition Details of (Ti 6AL-4V) Grade 5 Titanium Sheets
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition Insights for Grade 2 TitaniumSheets
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Detailed Mechanical Properties of Grade 2 Titanium Sheets
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-rolled Titanium Plate: Our cold-rolled titanium plates are crafted with precision through an intricate plate rolling process, where the final step ensures a high-quality finish via cold rolling. These sheets are delivered either in a work-hardened or heat-treated state, tailored to the specific demands of our clients. Further processing options, including mechanical or chemical treatments, are available to meet diverse customer specifications. 2. Hot-rolled Titanium Plate: Expertly produced through both longitudinal and transverse rolling, our hot-rolled titanium plates boast thicknesses ranging from 3.0mm to 155mm, and are supplied in a heat-treated condition. For enhanced quality, creep flattening is available as a heat treatment to eliminate internal stress and meet special flatness requirements. These plates can be provided as cut blanks, accommodating complex shapes tailored from parent metal, with further processing options based on customer needs.3. Forged Titanium Plate: Forged titanium plates are meticulously crafted by forging steel ingots on a vertical hydraulic press, followed by rolling, open die forging, or a combination of both. Standard slab dimensions include a thickness of up to 580 mm, a width of up to 2000 mm, and a length of up to 6000 mm. The specific dimensions and weights of these forged plates are custom-agreed between the manufacturer and the client, ensuring tailored precision.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, aims to produce the world's highest-performance titanium alloy plates. We offer rapid global delivery for ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we manufacture and stock alloy titanium plates Grade 5 (UNS R56400) in thicknesses ranging from 0.5mm to 300mm. Our production methods include cold rolling for 0.5mm-6.0mm, hot rolling for 6.0-50mm, and forging for plates over 50mm. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, boasting high strength, ductility, excellent corrosion resistance, and high-temperature endurance. Consequently, it is highly valued across general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and other leading standards.
The Ti-6Al-4V Grade 5 titanium plate has extensive applications in aerospace, military industry, power industry, vehicle armor, rocket precision guidance parts, and marine industry, reflecting its versatile and high-performance nature.
Grade 1
DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates, known for their superior quality and performance.
Pure Grade 1 titanium plate is celebrated for its excellent ductility and cold formability, making it optimal for deep drawing. It is renowned for its outstanding general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density of about half that of nickel-based alloys, Grade 1 titanium offers a high strength-to-weight ratio and exceptional corrosion resistance, making it suitable for a wide range of harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most malleable, offering good cold formability, excellent corrosion resistance, superior weldability, and impressive impact hardness.
As a leading manufacturer, we produce ASTM B265 Titanium Gr 1 Plates, including Titanium Gr 1 Sheets, Finished Plates, Coils, and Hot and Cold Rolled Plates. We also offer Titanium ASTM B265 Gr 1 Sheets, Patterned Plates, and Perforated Plates. DAXUN Alloys is a trusted name in China for all your Grade 1 titanium needs.
Grade 2
DAXUN specializes in producing and stocking commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of commercially pure titanium, offering high strength, ductility, and excellent corrosion resistance for a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes a perfect balance between strength and ductility. It offers good impact strength, easy weldability, and exceptional corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it provides excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and superior corrosion resistance make it an ideal choice for a wide array of applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the preferred alloy for most industrial applications requiring exceptional ductility and corrosion resistance.
DAXUN is a metal expert dedicated to small and large titanium plate projects. As your reference point and long-term partner, we are equipped to provide you and your business with high-quality titanium plates and any technical assistance you may require. Consider DAXUN not merely as your supplier of industrial pure titanium and titanium alloy plates but as your strategic ally, committed to overcoming challenges and meeting your project goals.
At DAXUN's premier service center in China, we maintain an extensive stock of titanium plate products, ready for rapid order fulfillment. By offering basic processing, precision water jet cutting, and efficient plate nesting solutions, we deliver unmatched value to our customers, significantly reducing their time and costs.
Our unwavering commitment to continuous investment in cutting-edge production facilities, alongside strategic capacity agreements with our trusted partners, ensures that DAXUN remains at the pinnacle of titanium plate quality, today and for the future.
Reach out to DAXUN today to receive the most competitive prices and detailed technical information on our superior titanium plates.
Q1: What products can you offer?
A: We can offer a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series.
Additionally, we provide the 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, among others. Also available are high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products based on your drawings to ensure they meet your specific requirements.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize stringent quality control from beginning to end.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the form of packaging and transportation according to your request,
but you will need to cover any costs incurred during this period and any price differences.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize stringent quality control from beginning to end.
Q6. How long is the delivery time?
A: Delivery takes 7 to 20 working days after payment confirmation.
If the order is urgent, we will expedite the process to complete it in advance.
Q7. What is your Payment?
A: 100% T/T in advance, Western Union (For Small Orders)
B: 30% T/T in advance and the remaining 70% before shipment
C: 100% Irrevocable LC at sight (For Large Orders)
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for making stainless steel pots, sinks, bowls, etc. Provide us with your usage details, and we will adjust the mechanical properties to meet your requirements.
Q9: How to get a sample?
A: FREE samples are available for your evaluation. If you need a small piece, we may cover the courier cost, depending on the situation.
Q10: Which country have you exported to?
A: To date, we have exported stainless steel materials to various countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International airport and we will arrange to pick you up.
){kind=link}