| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Daxun proudly produces and stocks a wide range of commercially pure titanium plates, specifically Grade 2 (UNS R50400), with thicknesses spanning from 0.5mm to 120mm. Known as the 'workhorse' of the pure titanium family, Grade 2 combines remarkable strength, ductility, and outstanding corrosion resistance, making it ideal for numerous industrial applications.
Grade 2 Titanium Plate offers an exceptional balance of strength and ductility. It boasts excellent impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, and wet ***. Moreover, it stands out with its excellent resistance to seawater and salt solutions.
Titanium's low density, superior strength-to-weight ratio, and outstanding corrosion resistance make it the material of choice for varied applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is perfect for industrial applications demanding high ductility and corrosion resistance.
Grade 2 Titanium Plate's lower density makes it ideal where weight considerations are crucial. Key industries include medical, chemical equipment, and aerospace. Its strength and corrosion resistance render it perfect for marine, chemical processing, and desalination applications. Typical uses encompass oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and various industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
Daxun ensures top-quality through rigorous assurance tests, including flattening, pitting, resistance, mechanical, hardness, material positive identification, and expansion tests. These tests confirm the material's suitability for required applications. We measure the diameter, thickness, and surface meticulously during production. Our standard delivery time is 5-7 days, with special size products taking 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm, and hot-rolled or heat-treated thicknesses from 4.76 mm to 155 mm. These plates are produced by longitudinal and transverse rolling. If necessary, creep flattening can be used as a heat treatment to relieve internal stresses and meet special flatness requirements. Plates can be supplied in cut blank form, allowing parts with complex shapes to be cut from a parent plate. Further processing depends on customer requirements and can be mechanical or chemical.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished expert in the metal industry, specializing in both small and large-scale titanium plate projects. As your go-to reference point and long-term partner, DAXUN is dedicated to supplying your business with top-tier titanium plates and comprehensive technical support. More than just a supplier of industrial pure titanium plates and titanium alloy plates, DAXUN is your strategic collaborator, prepared to help you navigate any challenges and fulfill your project needs, ensuring you achieve your goals with excellence.
At DAXUN's service center in China, we maintain a robust inventory of titanium plate products to facilitate rapid order processing. By offering basic processing, water jet cutting, and plate nesting services, we enhance value for our customers, enabling significant time and cost savings.
Our unwavering commitment to continuous investment in production facilities and strategic capacity agreements with our partners positions DAXUN at the cutting edge of titanium plate quality, both now and for the future.
Reach out to DAXUN today to receive the most competitive titanium plate prices and the latest technical insights.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China. Our mission is to create the world's highest performance titanium alloy plates, offering rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. We produce and stock Grade 5 (UNS R56400) alloy titanium plates in thicknesses from 0.5mm to 300mm. The 0.5mm-6.0mm range is cold rolled, 6.0-50mm is hot rolled, and 50mm and above are forged. Grade 5 titanium plate, renowned as the 'workhorse' of titanium alloys, boasts high strength, excellent ductility, corrosion resistance, and high-temperature tolerance, making it indispensable for both general and military industries. Our plates comply with standards including ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates are primarily utilized in aerospace, military industries, power sectors, vehicle armor, rocket precision guidance systems, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates are renowned for their superb ductility and cold formability, making them ideal for deep drawing applications. Grade 1 titanium offers outstanding general and seawater corrosion resistance, as well as resistance to oxidizing, neutral, and mildly reducing media, including chlorides. With its low density, high strength-to-weight ratio, and superior corrosion resistance, it is the material of choice for various demanding chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, possessing excellent cold formability, exceptional corrosion resistance, excellent weldability, and good impact hardness.
DAXUN is renowned as a producer and supplier of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, and Titanium Grade 1 Coils. We offer pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and Sheets, all compliant with ASTM B265 standards. Look no further for Titanium Gr 1 manufacturers and dealers in China.
Grade 2
DAXUN proudly produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) offers an excellent combination of high strength, ductility, and superb corrosion resistance, suitable for a wide range of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes an exceptional balance between strength and ductility. It offers good impact strength and is easily weldable. This material has excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It is also highly resistant to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium is an ideal material for diverse applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the preferred alloy for most industrial applications demanding strong ductility and corrosion resistance.
DAXUN is a metal expert dedicated to handling both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is committed to providing you with high-quality titanium plates and technical assistance. Consider DAXUN not only as your supplier of industrial pure titanium plates and titanium alloy plates but also as your strategic partner. We are here to help you overcome any challenges and meet your needs, ultimately enabling you to achieve your project goals.
At DAXUN's premier service center in China, we maintain a comprehensive stock of titanium plate products ready for fast and efficient order processing. By offering essential processing, precision water jet cutting, and sophisticated plate nesting services, we provide unparalleled value to our customers, significantly saving their time and costs.
DAXUN remains at the pinnacle of titanium plate excellence through continuous investment in our state-of-the-art production facilities and strategic capacity agreements with our trusted partners. This ensures that we lead the industry in titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and the latest technical information tailored to your needs.
Q1: What products can you offer?
A: Our extensive product range includes various general steel types such as 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, as well as 300 and 400 series steel.
Additionally, we specialize in duplex stainless steels like 2205, 2304, 2101, 2507, and high-nickel alloys including 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products precisely according to your drawings to perfectly meet your specifications.
Q3. How does your factory handle quality control?
A: Quality is our top priority. We implement stringent quality control measures from the beginning of production to the final stages, ensuring exceptional quality in every product.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods as per your requests.
However, please note that you will need to cover any additional costs or differences incurred during this process.
Q5. How does your factory handle quality control?
A: Quality is paramount. We maintain rigorous quality control protocols from the onset of production right through to completion.
Q6. How long is the delivery time?
A: Generally, it takes 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the process to meet your deadlines.
Q7: What is your Payment method?
A: 100% T/T in advance, or Western Union (for small orders).
B: 30% T/T in advance and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight (for large orders).
Q8: Can you produce DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, etc. Just inform us of your specific usage, and we'll adjust the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: FREE samples are available for your evaluation and testing. For small pieces, we might cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, our stainless steel materials have been exported to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many other countries.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}