| Customization: | Available |
|---|---|
| Type: | Stainless Steel Sheets |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ASTM Specification | ASTM A240 / ASME SA240 |
| Standard | MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Length& Sizes Duplex 2507 board | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, 4′ x 8′, Cut to size available |
| Thickness | 0.1mm to 100 mm Thk |
| Width | 10-2500mm |
| Hardness Duplex 2507 board | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper | Annealed |
| Condition | Polished on both sides |
| Finish Duplex 2507 board | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Stock in form of Duplex 2507 board | Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | ATI, POSCO, JISCO, TISCO, LISCO, BAOSTEELESSAR, JINDAL, BHUSHAN, IMPORTED material |
| Test Report Duplex 2507 board | Raw Materials Certificate |
| EN 10204/3.1B | |
| 100% Radiography Test Report | |
| High special strength, high melt point | |
| Third Party Inspection Report, etc | |
| Excellent corrosive resistance, good thermal resistance | |
| Customer support after-sales service | |
| Strict Control from Raw Material to Finished | |
| Profiling Duplex 2507 board | To provide a full profiling service we use numerous profiling methods including: |
| Plasma Plate Cutting | |
| Laser Plate Cutting | |
| Oxy-propane Flame Cutting | |
| Specialized in Duplex 2507 board | material under 3/16 " [5.00 mm] in thickness and 24″ [600 mm] and over in width |
| material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width | |
| cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width | |
| Free Quote, Inquiry answered within 24 hours | |
| We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. | |
Stainless Steel Plate Surface Description
| Finish Designation | Method and degree of finish |
| No.1 | After hot rolling, heat treatment, pickling or other equivalent treatment is applied. |
| No.2D | Annealing and pickling are performed after cold rolling; material is soft with surface of silver-white luster; used for general applications and deep drawing. |
| No.2B | After 2D finish, skin pass rolling is performed to obtain a more suitable luster; the surface becomes very exquisite; used for general applications. |
| No.3 | Intermediate 100-120 grit finish; used for applications in which surface polishing is performed after shaping. |
| No.4 | General 150-180 grit finish; used for restaurants and kitchen equipment and tools. |
| #240 | 240 grit finish; used when a finer finish than No. 4 is required; typically for restaurants and kitchen equipment and tools. |
| #320 | 320 grit finish polished product. |
| HL | This finish is performed by continuous linear polishing using an abrasive of appropriate grain size; mainly used for architectural applications. |
| BA | Achieved by performing bright annealing after cold rolling and then skin pass rolling to obtain even greater reflectance; provides excellent corrosion resistance; used for household appliances, kitchen equipment, and automobiles. |
| 8K | Through multiple grinding, it achieves very high brightness and smoothness, like a mirror. |
Daxun International embarked on its illustrious stainless steel journey in 2003. With over two decades of dynamic growth and groundbreaking innovation, it has risen to the pinnacle of the industry, firmly establishing its esteemed reputation in stainless steel materials and advanced processing.
With an illustrious history in international business, Daxun's 2023 export revenue surged past US$100 million. By strategically establishing three export service bases in China, the company has forged robust alliances with engineering firms, steel mills, and global trading entities. This extensive collaborative network continually enhances service capabilities and ambitiously expands Daxun's footprint in overseas markets.
Daxun International redefines stainless steel services with its innovative 'supermarket' model, partnering globally with renowned steel mills. With an impressive inventory of 160,000 tons-comprising 20,000 tons of diverse metals, including ordinary stainless steel plates, duplex steel plates, nickel-based alloy plates, and heat-resistant steel plates-Daxun ensures reliability, unparalleled quality, and strict adherence to specifications and delivery standards.
Equipped with cutting-edge steel processing equipment and professional testing centers, Daxun excels in cutting, grinding, forming, beveling, welding, heat treatment, machining, spraying, and beyond. Serving over 30 diverse industries-including automotive, home appliances, elevators, new energy, vacuum semiconductors, food and beverage/biofermentation, petrochemicals, and energy equipment-Daxun's expertise is unrivaled.
Daxun's extensive service experience is reflected in its wide range of offerings. With a client base exceeding 70,000 across 30 industries and 30,000+ active customers, Daxun's industry recognition and service excellence are well-established.
Daxun guarantees prompt and efficient delivery of stainless steel products through an integrated system that merges information flow, logistics, and capital flow. Real-time order data seamlessly links to the logistics system, ensuring swift delivery. Strategically positioned processing centers near highways, rivers, and oceans facilitate efficient scheduling, rapid response, and smooth transportation.
Dedicated to quality and integrity, Daxun introduces 'Performance Excellence Management' and adopts 'PDCA+Lean' management principles, ensuring 'Daxun = assured quality' becomes synonymous with trust. The implementation of a sophisticated ERP system allows full traceability of each steel plate, reinforcing the industry's anti-counterfeiting efforts.
Daxun prioritizes time, material, and stress savings for customers, ultimately reducing costs. By offering cost-optimized material recommendations and streamlined processing services, Daxun enhances material utilization. Continuous lean improvement activities enable Daxun to minimize its own costs and pass on savings to customers. Additionally, a comprehensive product traceability system and prompt resolution of quality concerns provide customers with unparalleled peace of mind.
| Name | 2507/S32750 |
| UNS | S32750; S39275 |
| En No. | 1.441 |
| C (max.) | 0.03 |
| Mn | 1.2 |
| Si | 0.8 |
| Cr | 24.0-26.0 |
| Ni | 6.0-8.0 |
| Mo | 3.0-5.0 |
| N | 0.24-0.32 |
| Cu | 0.5 |
| Other | S 0.020 max; P 0.035 max |
| PREN | 40-43 |
| Grade | Property | Value |
| 2507/ S32750 |
Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi | |
| Ultimate Tensile Strength | 116 ksi | |
| 0.1% Offset Yield Strength 0.2% | 91 ksi | |
| Elongation in 2 inches, % | 15% | |
| Hardness Rockwell C | 32 | |
| Impact Energy | 74 ft.-lbs | |
| Density | 0.28 lb per inch3 | |
| Modulus of elasticity | 28 x 10(6) psi | |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
| Thermal conductivity | 8.7 Btu/hr ftoF | |
| Heat capacity | 0.12 Btu/ lb oF | |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
| Grade | Type | Thickness | Surface |
| Austenitic | 304/304H/304L/304J1 | 0.25-150mm | 2B/BA/NO.4/8K/SB/HL/NO.1 |
| 321 | 0.4-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| 316/316L/317L/316Ti | 0.3-80mm | 2B/BA/NO.4/8K/SB/HL/NO.1 | |
| Ferrite | 430 | 0.4-3.0mm | 2B/BA/NO.4/8K/SB/HL |
| Ultra Pure Ferrite | 443 | 0.4-2.0mm | 2B |
| 436L/439/444/441 | 0.5-3.0mm | 2B,2D | |
| 409L | 0.4-2.5mm | 2B,2D | |
| Grade | Type | Thickness | Original |
| Heat-resistant Steel | 309S | 0.5-40mm | CHN |
| 310S | 0.5-40mm | CHN | |
| Duplex Steel | 2101 | 1.5-50mm | CHN |
| 2304 | 3.0-50mm | CHN | |
| 2205 | 0.5-60mm | CHN | |
| 2507 | 1.0-60mm | SWE / JPN / CHN | |
| Super Austenitic Steel | N08904 | 0.6-50mm | SWE / JPN / CHN |
| S31254 | 0.5-50mm | SWE / JPN / CHN | |
| N08926 | 0.5-50mm | SWE / JPN / CHN | |
| N08367 | 0.5-50mm | SWE / JPN / CHN | |
| Nickel Base Alloy | N08031 | 1.0-50mm | US / JPN / GER |
| N08810/N08800 | 0.8-50mm | US / JPN / CHN | |
| N08028 | 1.0-20mm | US / GER / JPN | |
| N08020 | 1.0-20mm | US / GER / JPN | |
| N08825 | 0.8-40mm | US / GER / SWE / JPN / CHN | |
| N10276 | 0.5-50mm | US / GER / JPN | |
| N06022 | 1.0-50mm | US / GER / JPN | |
| N06625 | 0.8-20mm | US / GER / CHN | |
| N04400 | 1.0-20mm | US / GER / JPN | |
| N06600 | 1.0-50mm | US / GER / JPN / CHN | |
| N02201 | 0.5-20mm | US / JPN | |
| Titanium | TA1/Gr1 | 0.5-50mm | JPN / CHN |
| TA2/Gr2 | 0.5-50mm | JPN / CHN | |
| Welding Material | ERNiCrMo-13 | 1.2,2.4mm | GER |
| ERNiCrMo-3 | 2.4mm | GER | |
| ERNiCrMo-4 | 2.4mm | US |
Daxun Alloys proudly stocks Duplex 2507, a premium super duplex stainless steel plate with an impressive composition of 25% chromium, 4% molybdenum, and 7% nickel. Engineered for applications demanding exceptional strength and corrosion resistance, such as chemical processing, petrochemical, and seawater equipment, this alloy excels. Its robust resistance to chloride stress corrosion cracking, combined with excellent thermal conductivity and a low coefficient of thermal expansion, ensures optimal performance. The high chromium, molybdenum, and nickel content guarantees outstanding resistance to pitting, crevice, and general corrosion.
Duplex 2507 (UNS S32750) is an advanced super duplex stainless steel featuring a composition of 25% chromium, 4% molybdenum, and 7% nickel. Crafted for rigorous applications requiring superior strength and corrosion resistance, it is ideal for chemical processing, petrochemical, and seawater equipment. This steel is highly resistant to chloride stress corrosion cracking, offers excellent thermal conductivity, and has a low coefficient of thermal expansion. The significant levels of chromium, molybdenum, and nickel ensure exceptional resistance to pitting, crevices, and general corrosion.
ASTM/ASME ...... A240 - UNS S32750
EURONORM ...... 1.4410 - X2 Cr Ni MoN 25.7.4
General Corrosion
To achieve optimal results, 2507 should be hot worked between 1875°F and 2250°F, followed by a solution anneal at a minimum of 1925°F and rapid quenching using air or water.
Cold working 2507 is compatible with most standard stainless steel processes. Due to its higher yield strength and lower ductility compared to austenitic steels, additional forming forces, larger bending radii, and greater springback margins are required. Techniques such as deep drawing and stretch forming are more challenging. For formations exceeding 10% cold deformation, a solution anneal and quench is recommended for optimal performance.
For superior corrosion resistance, 2507 should undergo solution annealing and quenching post hot or cold forming. Anneal at a minimum of 1925°F, followed by rapid air or water quenching. For optimal results, heat-treated products should be pickled and rinsed.
2507 stainless steel exhibits excellent weldability, compatible with various welding techniques including SMAW, GTAW, PAW, FCW, and SAW. Use 2507/P100 filler metal to achieve the desired duplex weld structure when welding.
2507 is not required, except to prevent condensation on cold metal. The Interpass
Our premium stainless steel sheets come in an array of stunning finishes: brushed, 2B smooth, and 8K mirror, offering superior aesthetic and functional appeal.
Each stainless steel sheet features a protected finished side with an easily removable film, safeguarding against wear and marks during fabrication or installation. The reverse side remains unfinished.
The 2205 Grade Stainless Steel Sheet is a versatile and widely used option, known for its superb weldability, formability, and impressive corrosion resistance.
){kind=link}