| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Striving to produce the world's highest performing titanium alloy plates, we ensure rapid global delivery for ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN crafts and maintains an extensive inventory of Grade 5 alloy titanium plates (UNS R56400) in a variety of thicknesses from 0.5mm to 300mm (with 0.5mm-6.0mm cold-rolled, 6.0mm-50mm hot-rolled, and 50mm and above forged). The Grade 5 titanium plate (Ti-6Al-4V) is the 'workhorse' of titanium alloys, celebrated for its exceptional strength, ductility, and corrosion resistance, as well as superior high-temperature performance. Its versatility makes it indispensable across general and military industries. Compliance with standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is crafted from 90% titanium, 6% aluminum, and 4% vanadium. As an α-β titanium alloy, aluminum stabilizes the α phase while vanadium stabilizes the β phase. Key attributes of the Ti-6Al-4V titanium alloy plate include outstanding comprehensive performance and excellent processability. The TC4 titanium alloy offers superior strength at both room and high temperatures, remarkable creep resistance, and thermal stability. It demonstrates high fatigue performance, *** growth resistance in seawater, satisfactory fracture toughness, and commendable hot salt stress corrosion resistance. Ti-6Al-4V titanium plates also exhibit excellent plasticity and superplasticity, lending themselves to a variety of processing methods including diverse welding and machining techniques.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military industries, power generation, vehicle armor, precision rocket guidance components, marine applications, and more.
Grade 5 titanium alloy plate is the most commercially available and versatile of all titanium alloys, blending high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy boasts exceptional comprehensive properties:
Ti-6AL-4V titanium plates and sheets are essential for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), while maintaining good ductility and lateral strength. Key applications include: 1. Jet engine compressor blades, disks, rings, aircraft fuselage components like wings and bulkheads, turbine disks, doors, heat shields, engine nozzles, landing gear doors, and superplastic forming parts for fuselages. 2. Military uses such as armor, guidance systems, and shell casings. 3. Critical spacecraft components, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment, such as bicycle frames and golf clubs. 6. Any other uses requiring a high strength-to-weight ratio.
Daxun implements rigorous quality assurance tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These ensure that our materials meet the highest standards for their intended applications. Throughout production, we meticulously measure product diameter, thickness, and surface quality. Standard delivery time is 5-7 days, with special size products delivered within 15-20 days.
Explore the detailed chemical composition of our premium (Ti 6AL-4V) Grade 5 Titanium Sheets, known for their superior quality and remarkable performance.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Investigate the precise chemical composition of our Grade 2 Titanium Sheets, engineered for reliability and consistent performance.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Uncover the mechanical properties of Grade 2 Titanium Sheets, tailored for applications requiring a balance of strength and ductility.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished expert in the realm of metal, specializing in both small and extensive titanium plate projects. As your trusted resource and enduring partner, DAXUN is committed to offering unparalleled titanium plates and comprehensive technical assistance to elevate your business. More than just a supplier of industrial pure and titanium alloy plates, DAXUN stands as your strategic ally, ready to navigate any challenges and fulfill your specific requirements, ensuring you achieve your project objectives with exceptional precision.
At DAXUN's state-of-the-art service center in China, we maintain a robust inventory of titanium plate products, enabling swift order processing. Our value-added services, including basic processing, water jet cutting, and plate nesting, are designed to deliver significant time and cost savings for our esteemed customers.
DAXUN's unwavering commitment to continuous investment in production facilities and strategic capacity agreements with our partners positions us at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to secure the most competitive titanium plate prices and access cutting-edge technical information.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti-6Al-4V Grade 5 (UNS R56400) alloy titanium plates from China. Focused on creating world-class, high-performance titanium alloy plates, we ensure rapid delivery across the globe. Our Grade 5 titanium plates, compliant with ASTM B265, are available with thicknesses from 0.5mm to 300mm. These plates are cold-rolled for 0.5mm-6.0mm, hot-rolled for 6.0mm-50mm, and forged for thicknesses above 50mm. Grade 5 titanium, recognized as the 'workhorse' of titanium alloys, is celebrated for its high strength, ductility, and superior resistance to corrosion and high temperatures, making it invaluable for both general and military applications. Our products meet a wide array of standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
The Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
Today, DAXUN Alloys is a preeminent global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plates are renowned for their excellent ductility and cold formability, making them ideal for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium withstands oxidizing, neutral, and mildly reducing media, including chlorides. With a density about half that of nickel-based alloys, titanium offers an exceptional strength-to-weight ratio and superior corrosion resistance, making it perfect for various harsh chemical environments. Commercially pure Grade 1 titanium exemplifies softness and ductility, coupled with excellent cold formability, corrosion resistance, weldability, and impact hardness.
We are leading producers of ASTM B265 Titanium Gr 1 Plates, offering a range of products including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more, all manufactured to the highest standards in China.
Grade 2
DAXUN manufactures and stocks commercially pure Grade 2 titanium plates (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate is the go-to material in the commercially pure titanium family due to its balanced properties of high strength, ductility, and outstanding corrosion resistance, serving various industrial needs.
Grade 2 Titanium Plate is a commercially pure titanium offering an excellent combination of strength and ductility. Its notable impact strength and weldability, coupled with excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***, make it an optimal choice. Moreover, it excels in resisting seawater and salt solutions.
Titanium's low density, remarkable strength-to-weight ratio, and superior corrosion resistance make it ideal for numerous applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the preferred alloy for industrial applications demanding high ductility and corrosion resistance.
DAXUN is your trusted metal expert for both small and large titanium plate projects. We are your reliable partner, dedicated to providing high-quality titanium plates and comprehensive technical assistance. Beyond just a supplier, DAXUN is your strategic partner, committed to helping you overcome any challenges and meet your project goals.
Experience unparalleled efficiency with DAXUN's service center in China, where we maintain a robust inventory of titanium plate products for rapid order fulfillment. Leveraging advanced basic processing, precision water jet cutting, and meticulous plate nesting, we deliver exceptional value-added services that significantly reduce both time and costs for our esteemed customers.
At DAXUN, continuous investment in our state-of-the-art production facilities, coupled with strategic capacity agreements with our partners, solidifies our position as a leader in titanium plate quality. We are committed to maintaining this excellence both now and in the future, ensuring our products meet the highest standards of performance.
Reach out to DAXUN today to access the most competitive prices and comprehensive technical information on our titanium plates. Discover why we are the preferred choice for titanium solutions.
){kind=link}