Cp Gr1 Titanium Tube Titanium Welded Pipe Titanium Seamless Tube Price ASTM B338 Corrosion Resistance Seawater Desalination Grade 1 Titanium Tube

• Customization: Available
• Type: Titanium Pipes
• Application: Industrial, Medical
• Model NO.: Grade 1 titanium tube
• Technique: Hot Rolled
• Grade: Gr1 Grade1
• Shape: Round
• Standards: Astmb861 B862 B338 ASME Sb861 Sb862 Sb338
• Titanium Plate Grade: Grade 1 Uns R50250
• Transport Package: Wooden Box
• Specification: φ 6.35mm-φ 1219mm
• Trademark: Daxun
• Origin: China
• Production Capacity: 1000ton

Product Description

Product Parameters

Grade 1 Titanium pipe & Tubes Specification	ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862
Grade 1 Titanium pipe & Tubes Grades	Commercially pure titanium Grade 1- TA1- USN 50250
Grade 1 Titanium pipe & Tubes Type	ot Rolled / Cold Drawn / Welded / ERW
Grade 1 Titanium pipe & Tubes Outer Diameter Size	Titanium seamless pipe - φ1.0mm to φ508.3mm
	Titanium welded pipe - φ6.0mm to φ1219mm
Grade 1 Titanium pipe & Tubes Wall Thickness	0.3mm-50mm (customizable wall thickness)
Grade 1 Titanium pipe & Tubes Length	5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
Titanium pipe Form	' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc
Marking	All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.)
Uses of Titanium Alloy Tubes	Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes.
Grade 1 Titanium pipe & Tubes Pipe Ends	Plain Ends / Beveled Ends
Grade 1 Titanium pipe & Tubes Delivery Conditions	As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
Grade 1 Titanium pipe & Tubes Coating	Electropolish, Mechanical Polish, Satin Finish, Passivated
Grade 1 Titanium pipe & Tubes Other Testing	ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc.
Grade 1 Titanium pipe & Tubes Dimension	All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME
Grade 1 Titanium pipe & Tubes Value Added Services	Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Grade 1 Titanium pipe & Tubes Packaging	Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Grade 1 Titanium pipe & Tubes Shipment & Transportation	By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Grade 1 Titanium pipe & Tubes Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

Detailed Photos

Titanium Tube Manufacturing TypesTitanium Welded Tube
Tubular products made from strip are roll formed and fusion welded along a longitudinal seam. The welding processes employed by Daxun does not use any filler metals during the welding process.

Titanium  Welded & Drawn Tubing
Tubular products are welded and then redrawn to a final size. Welded and drawn is ideal to produce heavy wall to diameter tubes that cannot be welded directly to size, but still enjoy the lower cost savings vs. seamless tubes. All Daxun welded and drawn tubes are bright annealed.

Titanium  Seamless Tubing
Tubular products are drawn from tube hollows, which are made by piercing a billet or by a hot extrusion process. Seamless is ideal for very heavy diameter to wall ratios and offers very good outside dimensional tolerances.
 

 

Quality, delivery, inspection

Daxun performs several quality assurance tests, these tests include flattening test, flaring test, ultrasonic flaw detection test, pitting and resistance test, mechanical test, hardness test, material positive identification, expansion test, etc. All these tests ensure that the Grade 1 Titanium Welded Pipe and Grade 1 Titanium Seamless Pipe materials are suitable for the required application. During the production process, we measure the diameter, thickness and surface of the products. Our standard delivery time is 5-7 days and the delivery time for special size products is 15-20 days.

• Our delivery time is strictly in accordance with the contract.
• Support customer third-party agencies to go to the factory for inspection
• Support free samples for customer testing
• Support on-site or video factory inspection

 

Grade 1 Titanium Tube Features

Grade 1 Titanium Tube is the softest form of titanium and has the highest ductility. It has good cold forming characteristics and offers excellent corrosion resistance. It also has excellent welding properties and high impact toughness.

• Softest Titanium
• Highest Ductility
• Excellent Corrosion Resistance
• Good Cold Formability

Commercially Pure Titanium Grade 1 Tube is one of the softest and most ductile types with excellent formability. Grade 1 Titanium Tube is primarily used in the maritime and chemical industries where parts are exposed to extremely harsh conditions. The ultimate tensile strength of SB 338 Gr 1 Tube is 35 KSI min (240 MPa min), while the yield strength (0.2% variation) of Cp Grade 1 Tube is 25 - 45 KSI (170 - 310 MPa). Ti Cp Grade 1 Seamless Tube is also known as TA1, Titan Grade 1, and Gr 1. Grade 1 Titanium Tube is a non-alloyed, low-strength titanium tube product with low oxygen concentration and excellent formability; it is used in the chemical industry, heat exchangers, and desalination facilities.

Grade 1 Titanium Tube is also well suited for manufacturing exhaust systems, charge air pipes, and water pipes. We offer Titanium Tube with a thickness equivalent to 1.2 mm and diameters ranging from 51 mm to 102 mm (the most common exhaust system sizes). Therefore, these tubes are more stable and stronger even at higher exhaust gas temperatures.

Daxun certifies and tests titanium alloy tubes according to ASME SB/ASTM, B861 and B862, including hardness testing, hydrostatic testing, eddy current testing, ultrasonic defect identification, tensile testing, flattening, expansion testing, annealing, tempering, stress relief, etc.

Titanium Grade 1 Tube, Titanium UNS R50250 Tube, Titanium Alloy DIN 3.7025 Seamless Tube, Titanium Alloy Grade 1 Tube, Titanium Grade 1 Seamless Tube, Titanium UNS R50250 Seamless Tube, Titanium Alloy Grade 1 Tube, Titanium Tube Suppliers, Welded Titanium Tubes, Titanium Tubes for Sale, Titanium Seamless Tubes, Titanium Tube Suppliers, Titanium Werkstoff Nr. 3.7025 Tube, Titanium UNS R50250 Seamless Tube, Titanium Alloy R50250 Tube, Titanium R50250 Welded Tube, Titanium Gr1 Tube, Titanium Alloy DIN 3.7025 Welded Tube, Titanium Gr.1 Tube Suppliers in China.

 

Packaging & Shipping

 

Company Profile

 

Titanium Seamless Tubes
Daxun produces:
Hot-finished Titanium Tubes
These tubes are supplied in the form of hot-rolled or hot-extruded, straightened, machined inside and outside diameters, and surface polished. Titanium tubes are available in heat-treated or non-heat-treated forms. Our company has 100% ultrasonic flaw detection capabilities.
Titanium Tube Materials Available:
Hot-rolled Titanium Tubes: OD 19mm to 325mm, wall thickness 9mm to 30mm, length up to 5000mm (to be agreed on a case-by-case basis between the manufacturer and the customer); - Hot-extruded Titanium Tubes: OD 50mm to 160mm, wall thickness 7mm to 35mm, length up to 3000 (to be agreed on a case-by-case basis between the manufacturer and the customer).
Cold-finished Titanium Tubes
Cold-finished Titanium Tubes are supplied in the form of heat-treated, surface-etched, hydrostatically tested, or ultrasonically tested, depending on the requirements of the manufacturing specifications. Tubes Supplied:- OD 6mm to 89mm, wall thickness 0.5mm to 11mm, length up to 6000mm (to be agreed on a case-by-case basis between the manufacturer and the customer).

Titanium Welded Pipes
DaXun manufactures and supplies titanium pipes with diameters from 100 mm. 12.7 to 38.1 mm (0.47 in to 1.5 in), wall thickness from 0.4 to 1.65 mm (0.016 in to 0.065 in, depending on diameter), lengths up to 25000 mm, electrical Gr1, Gr2 and Gr12 titanium alloy pipes for engineering and chemical industries. Titanium welded pipes are made from flat rolled raw material (kelp) by automatic tungsten inert gas (argon) welding on electric pipe welders and heat treated on the mill line. Finished titanium welded pipes undergo mechanical testing, geometrical measurements, 100% ultrasonic and eddy current testing, pneumatic or hydrostatic testing; pipes are packed as per customer specifications. Manufacturing processes and inspection test equipment ensure thin wall welded pipes comply with ASTM B 338, ASME SB 338 standards.

CP GR1 Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.50 g/cc	0.163 lb/in³
a Lattice Constant	2.95 Å @Temperature 25.0 °C	2.95 Å @Temperature 77.0 °F	alpha phase
	3.29 Å @Temperature 900 °C	3.29 Å @Temperature 1650 °F	beta phase
c Lattice Constant	4.683 Å	4.683 Å @Temperature 77.0 °F	c/a = 1.587
Mechanical Properties	Metric	English	Comments
Hardness, Brinell	120	120	annealed
Hardness, Knoop	132	132	Estimated from Brinell.
Hardness, Rockwell B	70	70	annealed
Hardness, Vickers	122	122	Estimated from Brinell.
Tensile Strength	124 - 138 MPa @Temperature 427 °C	18000 - 20000 psi @Temperature 801 °F
	152 - 179 MPa @Temperature 316 °C	22000 - 26000 psi @Temperature 601 °F
	193 - 207 MPa @Temperature 204 °C	28000 - 30000 psi @Temperature 399 °F
Tensile Strength, Ultimate	240 MPa	34800 psi
Tensile Strength, Yield	170 - 310 MPa	24700 - 45000 psi
	76.0 - 90.0 MPa @Temperature 427 °C	11000 - 13100 psi @Temperature 801 °F	0.2% offset
	83.0 - 103 MPa @Temperature 316 °C	12000 - 14900 psi @Temperature 601 °F	0.2% offset
	110 - 124 MPa @Temperature 204 °C	16000 - 18000 psi @Temperature 399 °F	0.2% offset
Elongation at Break	24%	24%
	25 - 30 % @Temperature 427 °C	25 - 30 % @Temperature 801 °F
	30 - 35 % @Temperature 316 °C	30 - 35 % @Temperature 601 °F
	40 - 50 % @Temperature 204 °C	40 - 50 % @Temperature 399 °F
Reduction of Area	35%	35%
Tensile Modulus	103 GPa	14900 ksi
Compressive Modulus	110 GPa	16000 ksi
Poissons Ratio	0.37	0.37
Shear Modulus	45.0 GPa	6530 ksi
Charpy Impact	310 J	229 ft-lb	V-notch
Impact Test	136 J	100 ft-lb	Impact Strength
Coefficient of Friction, Dynamic	0.68	0.68	Ti sliding on Ti; 300 m/min
	0.8	0.8	Ti sliding on Ti; 40 m/min

CP GR2 Titanium tube PHYSICAL PROPERTIES
Density	Magnetic Permeability
0.163 lbs/in-3	Nonmagnetic
4.51 g/cm-3	Electrical Resistivity
Beta Transus (+/-25°F, +/--3.9°C)	21 µΩ/in
1680°F	0.53 µΩ/m
915°C	Elastic Modulus
Thermal Conductivity	15.2-17.4 Msi
12.60 BTU hr-1ft-1 °F-1	105-120 GPa
21.79 W m-1 °C-1	Typical values at room temperature of about 68-78°F (20-25°C)

GR5 TI6AL4V Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %
Modulus of Elasticity	113.8 GPa	16500 ksi
Compressive Yield Strength	970 MPa	141000 psi
Notched Tensile Strength	1450 MPa	210000 psi	Kt (stress concentration factor) = 6.7
Ultimate Bearing Strength	1860 MPa	270000 psi	e/D = 2
Bearing Yield Strength	1480 MPa	215000 psi	e/D = 2
Poisson's Ratio	0.342	0.342
Charpy Impact	17 J	12.5 ft-lb	V-notch
Fatigue Strength	240 MPa	34800 psi	at 1E+7 cycles. Kt (stress concentration factor) = 3.3
Fatigue Strength	510 MPa	74000 psi	Unnotched 10,000,000 Cycles
Fracture Toughness	75 MPa-m½	68.3 ksi-in½
Shear Modulus	44 GPa	6380 ksi
Shear Strength	550 MPa	79800 psi	Ultimate shear strength
Electrical Properties
Electrical Resistivity	0.000178 ohm-cm	0.000178 ohm-cm
Magnetic Permeability	1.00005	1.00005	at 1.6kA/m
Magnetic Susceptibility	3.30E-06	3.30E-06	cgs/g
Thermal Properties
CTE, linear 20°C	8.6 µm/m-°C	4.78 µin/in-°F	20-100ºC
CTE, linear 250°C	9.2 µm/m-°C	5.11 µin/in-°F	Average over the range 20-315ºC
CTE, linear 500°C	9.7 µm/m-°C	5.39 µin/in-°F	Average over the range 20-650ºC
Specific Heat Capacity	0.5263 J/g-°C	0.126 BTU/lb-°F
Thermal Conductivity	6.7 W/m-K	46.5 BTU-in/hr-ft²-°F
Melting Point	1604 - 1660 °C	2920 - 3020 °F
Solidus	1604 °C	2920 °F
Liquidus	1660 °C	3020 °F
Beta Transus	980 °C	1800 °F

Certifications

 

Daxun Alloy's pure titanium Grade 1 titanium tubes include:
seamless titanium tubes and welded titanium tubes, which have excellent ductility and cold formability, and are ideal for deep drawing. Grade 1 titanium tubes are known for their good general and seawater corrosion resistance and excellent resistance to oxidizing, neutral and slightly reducing media (solutions) (including chlorides).
Titanium's low density (about half that of nickel-based alloys), high strength, light weight and corrosion resistance make it an excellent choice for a variety of harsh chemical conditions. Execution standards are: ASTM B338 | ASTM B265 | ASME SB265 | ASTM F67 | ISO 5832-2 | 3.7025 | UNS R50250

Grade 2 Titanium Tube (UNS R50400 / Werkstoff WS 3.7034)

This is the most often used titanium tube for industrial applications, providing a superb balance of moderate strength and reasonable ductility. It offers excellent corrosion resistance in both highly oxidising and slightly reducing conditions (including chlorides). It provides good corrosion protection in the chemical and offshore industries, as well as aircraft manufacture, where strength and ease of forming are required. It's also utilised in heat exchangers, hypochlorite systems, fire water systems, ballast water systems, industrial and aerospace components, CPI equipment, and pipes.

Fabrication

Titanium Grade 2 responds well to cold forming using standard methods. It can be readily machined, but special attention must be paid to maintaining sharp tools and the liberal use of coolant. As with machining austenitic stainless steels, cuts should be deep and continuous with slow feeds and speeds.

Stock Availability

Daxun Alloys stocks CP 2 Grade Titanium Seamless and Welded Pipes in a variety of sizes.

Weight Reduction

CP 2 grade titanium tubes have low density and a high strength-to-weight ratio, making them suitable for applications where weight reduction is required without sacrificing overall strength. They are cold formable, have good ductility, and can be welded using conventional TIG and MIG processes, although inert gas shielding is required to prevent embrittlement of the weld zone.

Crystal Structure

At room temperature, ASTM B338 Grade 2 titanium tube has an alpha (hexagonal close-packed) crystal structure, just like commercially pure titanium grades 1 and 3. At about 885°C [1625°F], it transforms to a beta (body-centered cubic) structure. This transformation temperature can be increased or decreased depending on the type and amount of impurities or alloying additions. The addition of alloying elements also divides the single temperature of the equilibrium transformation into two temperature zones: the alpha transformation zone, below which the alloy is all alpha, and the beta transformation zone, above which the alloy is all beta. Between these two temperatures, both alpha and beta forms exist. Typical alpha and beta transformation temperatures for grade 2 titanium are 890°C (1635°F) and 913°C (1675°F), respectively.

Grade 2 Titanium Seamless Pipe Manufacturing Process

Daxun's ASTM B338 Grade 2 titanium seamless tubes are made from hollow blanks by hot extrusion process or oblique rolling and piercing process, followed by multiple cold rolling processes. Titanium seamless tubes should have continuous perimeters at all stages of the manufacturing operation. The de novo manufacturing of titanium seamless tubes mainly includes: sponge titanium vacuum arc melting ingot blanking to get hollow blanks cleaning cutting and feeding hot extrusion, or oblique rolling + piercing degreasing drying cutting online annealing and straightening pickling multiple cold rolling degreasing drying vacuum annealing straightening cutting pickling final inspection marking (DAXUN) and packaging.

Grade 2 Titanium Welded Pipe Manufacturing Process

Daxun's ASTM B338 Grade 2 titanium welded pipe is made of annealed flat-rolled steel plate or steel strip using automatic arc welding (TIG) process. The main production processes include: titanium plate uncoilingshearing butt welding cleaning pipe forming TIG welding eddy current testing pre-sizing annealing precision reducing and sizing straightening eddy current testing caliper marking cutting ultrasonic testing hydrostatic testing final inspection packaging. Welded pipes should be subjected to at least one stress relief heat treatment after forming and welding. Daxun uses any filler materials during the welding process.


Ti-6Al-4V Titanium Pipe- Grade 5 Titanium Tube

Titanium Alloy - (UNS R56400)
Introduction
DAXUN Ti-6Al-4V Titanium Tube, Grade 5 (UNS R56400) is the most popular titanium alloy. It is a duplex alpha+beta titanium alloy using aluminum as the alpha stabilizer and vanadium as the beta stabilizer. This high-strength alloy can be used at low temperatures of about 800°F (427°C). ATI Ti-6Al-4V, Grade 5 alloy is used for annealing, solution treating, and aging. Compressor blades, disks, and rings for jet engines; fuselage and space capsule components; pressure vessels; rocket engine cases; helicopter rotor hubs; fasteners; and critical forgings with a high strength-to-weight ratio.
The alloy is initially melted using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). Remelting is achieved in one or two vacuum arc steps.
Specifications
•ASTE B338 - Standard Heat Treatable Titanium Tube
• AMS 4928 - Forgings and Forging Stock (Annealed)
• AMS 4965 - Forgings (Solution Treated and Aged)
• AMS 4967 - Forgings (Annealed, Heat Treatable)

Physical Properties

Ti-6Al-4V Titanium Tube Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
Density: 0.160 lb/in3; 4.47 g/cm3
Beta Transus Temperature: 1830°F (± 25°); 999°C (± 14°)

Heat Treatment

Annealed at 1,700-1,900°F (927 - 1,038°C) when high hardness, tensile strength, and fatigue strength are required.
DAXUN 6-4 Grade 5 Titanium Tube can be heat treated in a variety of ways.
1. Annealing: 1,275 -1,400°F; (691 - 760°C), ½ to 2 hours, air or furnace cool
2. Stress Relief Annealing: 1,000 -1,200°F; (538 - 649°C), 1 to 8 hours, air or furnace cool
3. Solution Heat Treating: 1,675 -1,750°F; (913 - 954°C), 1 hour, water quench
4. Aging: 975 -1,025°F; (524 - 552°C), 4 to 8 hours - air cool

Optimum Properties

Small cross sections with rapid quenching are obtained in the solution treated and aged condition. Larger cross-section sizes and/or delayed quenching may result in less than optimal properties.

Hardness

Typical hardness in the annealed condition is Rockwell C 30-34 and approximately Rockwell C 35-39 in the solution and aged condition.

Forgeability/Formability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube is forged at 1,750°F (954°C) with a final forging temperature of 1,450°F (788°C). A reduction of at least 35% is recommended for best results.

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube is difficult to form at room temperature, even when annealed. Therefore, severe forming operations such as bending or stretching can be performed on the annealed material at temperatures up to 1,200°F (649°C) without changing its mechanical properties. Creep forming can be used for hot sizing or forming at temperatures ranging from 1,000 to 1,200°F (538 to 649°C).

Machinability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube can be machined using machining methods for austenitic stainless steels, with slow speeds, high feeds, good tool rigidity, and the use of large amounts of non-chlorinated cutting fluids.

Weldability

DAXUN Ti-6Al-4V Titanium Tube Grade 5 Titanium Tube is readily weldable in the annealed or solution and partially aged conditions, with aging

accomplished during post-weld heat treatment. Precautions must be taken to avoid contamination with oxygen, nitrogen, and hydrogen. Fusion welding may be performed in an inert gas-filled chamber or with the use of an inert gas tail shield over the molten metal and nearby hot zones. Spot welding, seam welding, and flash welding may all be performed without the use of a protective atmosphere.

Special Considerations

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube may be contaminated with hydrogen from improper pickling and from the absorption of oxygen, nitrogen, and carbon during forging, heat treating, brazing, etc. This contamination may reduce ductility and impair notch sensitivity and formability.

FAQ

Q1: What products can you offer?

A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300and 
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.

Q2. Can you produce the products according to my own drawings?

Yes, we can produce the products according to your drawings that will be most satisfy you.

Q3. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q4. Can I request to change the form of packaging and transportation?

Yes, We can change the form of the packaging and transportation according to your request, 
but you have to bear their own costs incurred during this period and the spreads.
 

Q5. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q6. How long is the delivery time?

A: 7~20 working days after confirming the payment.
If the order is urgent, we will push our workshop finish in advance.

Q7. What is your Payment? 

A:  100% T/T advance, Western Union (For Small Order) 

B:  30% T/T and balance 70% before the shipment

C:  100% Irrevocable LC at sight  (For Big Order) 

Q8: Can you make DDQ ( Deep Drawing Quality)?

A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.

Q9: How to get a sample?

A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
 
Q10:Which country have you exported to?

A:Until now,we have exported stainless steel  material to following countries: Vietnam,Thailand,Turkey,Russia,Maroc,Korea,India,Pakistan,UAE,Ukraine and so on.

Q11: How to visit your company?

A:By flight to Guangzhou Baiyun International airport,then we will pick you up.