| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly produces and maintains a substantial inventory of Grade 2 Titanium Plates (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of commercially pure titanium, this alloy balances high strength, ductility, and superior corrosion resistance, making it the ideal choice for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium alloy noted for its excellent strength-to-ductility ratio. It boasts good impact strength and superb weldability. Additionally, it offers remarkable corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its exceptional resistance to seawater and salt solutions further enhances its versatility.
Titanium's unique properties, such as low density, high strength-to-weight ratio, and outstanding corrosion resistance, make it perfect for a diverse range of applications. Grade 2 Titanium Plate resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the preferred alloy for industrial applications requiring superior ductility and corrosion resistance.
With a lower density, Grade 2 titanium plate is ideal where weight considerations are crucial. This makes it the material of choice in medical, chemical equipment, and aerospace industries. Its strength and corrosion resistance are also advantageous for marine, chemical processing, and desalination applications. Common applications include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, linings, and flue gas desulfurization systems. Adheres to standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
Daxun ensures top-notch quality through comprehensive tests, including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These rigorous procedures confirm the material's suitability for its intended applications. We meticulously measure diameter, thickness, and surface properties during production. Our standard delivery time is 5-7 days, with special size products delivered in 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm and in hot-rolled thicknesses from 4.76 mm to 155 mm. These plates come in hot-rolled or heat-treated conditions. Longitudinal and transverse rolling techniques are used. If necessary, creep flattening can be employed as a heat treatment to relieve internal stresses and meet specific flatness requirements. Plates can also be supplied in cut blank form for complex shapes, with further mechanical or chemical processing based on customer needs.
About the chemical composition of (Ti 6AL-4V) Grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large titanium plate projects. As your ultimate reference point and long-term partner, DAXUN is dedicated to providing you with top-notch titanium plates and unparalleled technical assistance. More than just a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic ally, empowering you to navigate challenges and meet your needs, ensuring the seamless achievement of your project goals.
DAXUN's state-of-the-art service center in China boasts a robust inventory of titanium plate products, ensuring rapid order processing. By offering essential processing services, water jet cutting, and plate nesting products, we deliver added value to our customers, significantly saving them time and reducing costs.
DAXUN's unwavering investment in production facilities, coupled with capacity agreements with our esteemed partners, guarantees that we remain at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the latest titanium plate prices and receive comprehensive technical information.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a renowned Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! We aim to produce the world's finest high-performance titanium alloy plates. We offer swift worldwide delivery of ASTM B265 Grade 2, Grade 5 Titanium Plates. DAXUN stocks and manufactures alloy titanium plates Grade 5 (UNS R56400) with a thickness range from 0.5mm to 300mm. Plates of 0.5mm-6.0mm are cold rolled, those from 6.0mm-50mm are hot rolled, and plates above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V), the cornerstone of titanium alloys, boasts high strength, excellent ductility, superior corrosion resistance, and exceptional high-temperature resistance, making it preferred by various general and military industries. Our products comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 titanium plate is primarily utilized in aerospace, military industry, power industry, vehicle armor, rocket precision guidance parts, marine industry, and more.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate is renowned for its excellent ductility and cold formability, making it perfect for deep drawing. Grade 1 titanium is recognized for its remarkable resistance to general corrosion and seawater, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and outstanding corrosion resistance, Grade 1 titanium is an excellent material choice for a multitude of harsh chemical environments. Commercially pure Grade 1 titanium is the most malleable and ductile, featuring excellent cold formability, superior corrosion resistance, and excellent weldability along with good impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Titanium Gr 1 Finished Plates. We supply ASTM B265 Titanium Grade 1 Coils, pure Titanium Grade 1 Hot Rolled Plates, Titanium Grade 1 Cold Rolled Plates, Titanium ASTM B265 Grade 1 Sheets, Grade 1 Titanium Patterned Plates, Titanium Grade 1 Perforated Plates, and other Titanium Grade 1 Sheets and Plates. We are your trusted manufacturers in China.
Grade 2
DAXUN offers and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Renowned as the 'workhorse' of commercially pure titanium, Grade 2 Titanium Plate (UNS R50400) combines high strength, excellent ductility, and superior corrosion resistance, fitting many industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate offering a perfect balance between strength and ductility. It possesses good impact strength, excellent weldability, and superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it boasts excellent resistance to seawater and salt solutions.
Grade 2 Titanium Plate, with its low density, high strength-to-weight ratio, and corrosion resistance, is ideal for a wide range of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring good ductility and corrosion resistance.
DAXUN is a metal expert dedicated to both small and large titanium plate projects. DAXUN is your go-to reference and long-term partner, ready to supply high-quality titanium plates and provide any technical assistance you may need. Consider DAXUN not just a supplier of industrial pure titanium plates and titanium alloy plates, but also a strategic partner committed to helping you overcome any challenges and meet your project goals.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, ensuring rapid order fulfillment. Our expert services, including precision water jet cutting and efficient plate nesting, deliver exceptional value, significantly reducing time and costs for our esteemed customers.
DAXUN's unwavering commitment to excellence is evident through our continuous investment in advanced production facilities and strategic capacity agreements with partners. This ensures that our titanium plates remain unparalleled in quality, both now and for the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and comprehensive technical insights.
Q1: What products can you offer?
A: We can offer you a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and more.
Additionally, we provide 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, along with high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can manufacture products tailored to your drawings to perfectly meet your specifications.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control from start to finish in our production process.
Q4. Can I request to change the form of packaging and transportation?
A: Certainly, we can adjust the packaging and transportation methods as per your request.
Please note, you would be responsible for any additional costs incurred during this period, including the price differences.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control from start to finish in our production process.
Q6. How long is the delivery time?
A: Our standard delivery time is 7~20 working days after payment confirmation.
If your order is urgent, we will expedite our production schedule to meet your deadline.
Q7. What is your Payment?
A: We offer flexible payment terms: 100% T/T in advance, Western Union for small orders,
B: 30% T/T deposit with the balance paid before shipment,
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, and more. Provide us with your specific application, and we will adjust the mechanical properties accordingly.
Q9: How to get a sample?
A: FREE samples are available for your evaluation and testing. For small pieces, we can cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}