| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a renowned Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China. Our mission is to create the world's highest-performing titanium alloy plates. We offer rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN boasts an extensive stock of Grade 5 (UNS R56400) alloy titanium plates, available in thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm and above forged). This Grade 5 titanium plate (Ti-6Al-4V) is the cornerstone of titanium alloy materials, offering remarkable strength, ductility, and corrosion resistance even at high temperatures. It is highly favored across general and military industries. Our products comply with various standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
The Ti-6Al-4V Grade 5 titanium plate features a composition of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum stabilizing the α phase and vanadium stabilizing the β phase. Key attributes of the Ti-6Al-4V titanium alloy plate include outstanding overall performance and excellent processability. The TC4 titanium alloy is noted for its exceptional strength at both room and elevated temperatures, superior creep resistance, and thermal stability. It also excels in fatigue performance and *** growth resistance in seawater, along with satisfactory fracture toughness and hot salt stress corrosion resistance. Additionally, the Ti-6Al-4V titanium plate is highly processable, plastic, and superplastic, making it suitable for various processing and welding methods.
The Ti-6Al-4V Grade 5 titanium plate is primarily utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 5 titanium alloy plate is the most commercially prevalent of all titanium alloys, known for its high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy offers an array of superior attributes:
Ti-6AL-4V titanium plates and sheets are ideal for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), with notable ductility and lateral strength. Applications include: 1. Jet engine compressor blades, disks, rings, fuselage components such as wings, fuselages, turbine disks, doors, bulkheads, military aircraft and hardware heat shields, engine nozzles, landing gear doors, and fuselage superplastic forming parts. 2. Military applications: armor, guidance systems, shell casings, etc. 3. Spacecraft components, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment, such as bicycle frames and golf clubs. 6. Additional uses requiring a high strength-to-weight ratio.
Daxun rigorously conducts multiple quality assurance tests, including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests, ensuring material suitability for the intended applications. During production, we measure the diameter, thickness, and surface of the product meticulously. Our standard delivery timeframe is 5-7 days, with special size products delivered in 15-20 days.
Discover the precise chemical composition of our premium (Ti 6AL-4V) Grade 5 titanium sheet, engineered for excellence.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the detailed chemical composition of our high-quality Grade 2 titanium, tailored for diverse applications.sheet, an epitome of resilience and precision engineering.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Delve into the exceptional mechanical properties of Grade 2 titanium, known for its versatility and reliability. sheet, offering unmatched performance for demanding environments.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is your ultimate metal expert, dedicated to both small and large-scale titanium plate projects. As your trusted reference point and long-term partner, DAXUN is poised to deliver premium titanium plates and unparalleled technical support for your business. Consider DAXUN not merely a supplier of industrial pure titanium plates and titanium alloy plates, but a strategic ally in overcoming any challenges and meeting your diverse needs, ensuring the successful achievement of your project goals.
DAXUN's state-of-the-art service center in China boasts a ready stock of titanium plate products, enabling swift order fulfillment. We enhance value for our customers through essential processing, water jet cutting, and plate nesting solutions that save both time and costs.
Ongoing investment in DAXUN's cutting-edge production facilities and strategic capacity agreements with our partners guarantee that DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to receive the most competitive titanium plate prices and comprehensive technical information.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With an unwavering commitment to crafting the world's most advanced titanium alloy plates, we offer swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a robust inventory of alloy titanium plates Grade 5 (UNS R56400), featuring thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm cold-rolled, 6.0-50mm hot-rolled, and above 50mm forged). Grade 5 titanium plate (Ti-6Al-4V) stands as the epitome of titanium alloy materials, blending high strength, ductility, and exceptional resistance to corrosion and high temperatures. This versatile material is highly esteemed by both general and military industries. Our products adhere to stringent standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military applications, the power industry, vehicle armor, rocket precision guidance systems, and marine environments.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-tier Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts superior ductility and cold formability, making it ideal for deep drawing. Renowned for its excellent general and seawater corrosion resistance, Grade 1 titanium also offers robust resistance to oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), coupled with a high strength-to-weight ratio, renders it an optimal choice for various demanding chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile grade, offering excellent cold formability, corrosion resistance, weldability, and impact hardness.
ASTM B265 Titanium Gr 1 Plate Producers, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) serves as the cornerstone of the commercially pure titanium family, providing an ideal combination of high strength, ductility, and exceptional corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate represents a commercially pure titanium option that strikes a perfect balance between strength and ductility. It features excellent impact strength and weldability, alongside outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its remarkable resistance to seawater and salt solutions further enhances its utility.
With its low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is a material of choice for myriad applications. It effectively withstands stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications demanding excellent ductility and corrosion resistance.
DAXUN stands as a metal expert dedicated to both small and large titanium plate projects. As your reference point and long-term partner, DAXUN is poised to provide your business with titanium plates and the technical support necessary to meet your project's demands. Beyond being an industrial supplier of pure titanium plates and titanium alloy plates, DAXUN aims to be your strategic partner, assisting you in overcoming any challenges and achieving your project goals.
DAXUN's premier service center in China boasts an extensive stock of high-quality titanium plates, ensuring rapid order fulfillment. Through our advanced processing techniques, including precision water jet cutting and efficient plate nesting, we deliver exceptional value to our customers, significantly reducing their time and costs.
Our unwavering commitment to continuous investment in DAXUN's state-of-the-art production facilities, along with our strategic capacity agreements with trusted partners, positions DAXUN as a leader in titanium plate quality, both now and for the future.
Reach out to DAXUN today to secure the most competitive prices and access detailed technical information on our superior titanium plates.
){kind=link}