| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly produces and stocks commercially pure titanium plates Grade 2 (UNS R50400), with thicknesses ranging from 0.5mm to 120mm. This Grade 2 Titanium Plate, renowned as the 'workhorse' of the commercially pure titanium family, delivers an exceptional blend of high strength, ductility, and unparalleled corrosion resistance, making it indispensable for a multitude of industrial applications.
Grade 2 Titanium Plate stands out as a commercially pure titanium plate, offering an exceptional balance between strength and ductility. Boasting impressive impact strength and weldability, it demonstrates excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its superior resistance extends to seawater and salt solutions, making it highly versatile.
With its low density, high strength-to-weight ratio, and outstanding corrosion resistance, titanium is the material of choice for a wide array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for demanding industrial applications requiring excellent ductility and corrosion resistance.
Grade 2 titanium plate's lower density makes it ideal for weight-sensitive applications. Key industries include medical, chemical equipment, and aerospace. Its strength and corrosion resistance also make it perfect for marine, chemical processing, and desalination industries. Common applications involve oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and other industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
At Daxun, we conduct rigorous quality assurance tests, including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests. These tests ensure the material's suitability for intended applications. During production, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery time is 5-7 days, with special sizes delivered in 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm, and in hot-rolled or heat-treated conditions from 4.76 mm to 155 mm. Produced by longitudinal and transverse rolling, these plates can undergo creep flattening heat treatment to relieve internal stresses and meet special flatness requirements. Plates can be supplied in cut blank form, with further processing tailored to customer requirements, whether mechanical or chemical.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN, a revered expert in the metal industry, specializes in both small and large-scale titanium plate projects. DAXUN stands as your ultimate reference point and steadfast partner, committed to providing you with top-notch titanium plates and any technical support you may require. Beyond being a mere supplier of industrial pure titanium and titanium alloy plates, DAXUN emerges as your strategic ally, dedicated to helping you navigate challenges and meet your diverse needs, ensuring the successful realization of your project goals.
Located in China, DAXUN's state-of-the-art service center boasts an extensive inventory of titanium plate products, enabling swift order processing. Our value-added services, including basic processing, water jet cutting, and plate nesting, are meticulously designed to save our customers both time and money while delivering unparalleled quality.
DAXUN's unwavering commitment to continuous investment in cutting-edge production facilities, coupled with strategic capacity agreements with our partners, positions us at the pinnacle of titanium plate quality, both now and for the foreseeable future.
Reach out to DAXUN today to receive the most competitive prices and comprehensive technical information on our superior titanium plates.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, your premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! With a vision to create the world's highest-performing titanium alloy plates, we provide rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a robust inventory of Grade 5 alloy titanium plates (UNS R56400) available in thicknesses ranging from 0.5mm to 300mm. Our 0.5mm-6.0mm plates are cold rolled, 6.0-50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, offering exceptional strength, ductility, and outstanding corrosion and high-temperature resistance, making it a favorite in both general and military industries. Compliance with standards: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 Titanium Plate is predominantly used in aerospace, military sectors, power industry, vehicle armor, rocket precision guidance parts, and marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior quality Grade 1 titanium plate.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it perfect for deep drawing applications. Grade 1 titanium is celebrated for its superb general and seawater corrosion resistance and its ability to resist oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density, high strength-to-weight ratio, and impressive corrosion resistance make it an excellent choice for harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile variant, offering good cold formability, exceptional corrosion resistance, excellent weldability, and notable impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plate, Titanium Gr 1 Sheets, Finished Plates, Coil Suppliers, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, Sheets, and Plates Manufacturers in China. Dealers of Grade 1 Titanium Patterned Plates, Perforated Plates, and extensive Titanium Gr 1 product range.
Grade 2
DAXUN offers an extensive range of commercially pure titanium plates, Grade 2 (UNS R50400), in thicknesses from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) combines high strength, ductility, and excellent corrosion resistance, catering to numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an ideal balance of strength and ductility. It features good impact strength, ease of weldability, and excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also demonstrates exceptional resistance to seawater and salt solutions.
With a low density, high strength-to-weight ratio, and remarkable corrosion resistance, titanium is ideal for diverse applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, it is the preferred alloy for industrial applications demanding superior ductility and corrosion resistance.
DAXUN: Your Expert Partner in Titanium Plate Solutions. Whether your project is small or large, DAXUN stands ready as your go-to reference and long-term partner. We provide high-quality titanium plates and comprehensive technical assistance tailored to your specific needs. Think of DAXUN as more than just a supplier; we are your strategic partner, dedicated to helping you overcome any challenges and meet your project goals with precision and efficiency.
At the heart of China, DAXUN's premier service center ensures rapid fulfillment of titanium plate orders, thanks to our extensive in-stock inventory. By offering basic processing, precision water jet cutting, and efficient plate nesting services, we provide unparalleled value, helping our esteemed customers save both time and money.
DAXUN's unwavering commitment to excellence is evident through continuous investments in state-of-the-art production facilities and strategic capacity agreements with trusted partners. This dedication positions DAXUN as a leader in delivering superior quality titanium plates, both now and in the future.
Reach out to DAXUN today for the most competitive prices and comprehensive technical insights on our exceptional titanium plates. Experience the difference in quality and service that sets us apart.
Q1: What products can you offer?
A: We offer a diverse range of steel types, including general steels like 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and 300 series.
Additionally, we provide 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products following your exact drawings to ensure utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our utmost priority. We consistently emphasize stringent quality control from the initial stages to final production.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation methods to meet your requests.
However, you will need to cover any additional costs incurred during this process.
Q5. How does your factory do regarding quality control?
A: Quality is our utmost priority. We consistently emphasize stringent quality control from the initial stages to final production.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation.
If your order is urgent, we will expedite the production process to meet your timeline.
Q7. What is your Payment?
A: For payment, we accept 100% T/T in advance or Western Union for small orders.
B: Alternatively, 30% T/T with the balance of 70% before shipment.
C: For large orders, we accept 100% Irrevocable LC at sight.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are ideal for stainless steel pots, sinks, bowls, etc. Let us know your specific usage, and we will adjust the mechanical properties accordingly.
Q9: How to get a sample?
A: We provide FREE samples for your evaluation. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: So far, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How to visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}