| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameters: Stainless Steel rod | |
| Material | 2205 S31803 |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. | |
| Under Third Party Inspection | |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Duplex Steel S32205 Rods are utilized across a myriad of sectors owing to their superb characteristics and remarkable versatility. S32205 is a duplex stainless steel that masterfully merges the benefits of austenitic and ferritic stainless steels, delivering exceptional strength, unparalleled corrosion resistance, and remarkable cost efficiency. Composition and Property: Duplex steel S32205 boasts approximately 22% chromium, 5-6% nickel, 3% molybdenum, and elevated levels of nitrogen, which collectively contribute to its formidable corrosion resistance and strength. The dual-phase microstructure of austenite and ferrite significantly surpasses the mechanical properties of conventional austenitic or ferritic stainless steels. Corrosion Resistance: One of the most notable features of the S32205 rod is its robust resistance to various forms of corrosion. It is highly resistant to pitting and crevice corrosion in chloride environments, making it an ideal choice for application in corrosive settings such as chemical processing, marine environments, and the offshore oil and gas industry.
For more information on stainless steel rods, please contact Daxun.
2205 Stainless Steel Rod Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 2205 | 0.03 | 2 | 1 | 0.03 | 0.02 | min: 21.0 | min: 2.5 | min: 4.5 | min: 0.08 |
| (S31803) | max | max | max | max | max | max: 23.0 | max: 3.5 | max: 6.5 | max: 0.20 |
| 2205 | 0.03 | 2 | 1 | 0.03 | 0.02 | min: 22.0 | min: 3.0 | min: 4.5 | min: 0.14 |
| (S32205) | max | max | max | max | max | max: 23.0 | max: 3.5 | max: 6.5 | max: 0.20 |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade 2205 | Density | Elastic | Mean Co-eff of Thermal | Thermal | Specific | Electrical | |||
| (kg/m3) | Modulus(GPa) | Expansion (μm/m/°C) | Conductivity (W/m.K) | Heat | Resistivity | ||||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | 0-100°C( J/kg.K) | (nΩ.m) | |||
| UNS S32205 / UNS S31803 | 782 | 190 | 13.7 | 14.2 | - | 19 | - | 418 | 850 |
Our forming capabilities include cutting-edge radial forging machines, heat treatment furnaces, melting furnaces, and rolling mills for manufacturing titanium rods. Additionally, we employ a unique hydroforming process for the production of various parts.
The stainless steel rod heat treatment process at Jiangsu Daxun Alloy Co., Ltd. employs state-of-the-art heat treatment furnace equipment. This advanced technology guarantees exceptional stability and superior performance of the material, making it perfect for the most demanding applications.
At Jiangsu Daxun Alloy Co., Ltd., our stainless steel production is powered by the world's most advanced vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. These cutting-edge technologies are instrumental in minimizing impurities during the smelting process, thereby significantly enhancing the overall performance of our high-quality stainless steel rods.
Our stainless steel products come with full certification and traceability, ensuring top-tier quality. We proudly supply leading industries such as aerospace, industrial, medical, marine, and military with the finest stainless steel available.
| Tensile Strength | Yield Strength | |||||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
| Grade | Tensile Str | Yield Str | Elong | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| Tensile Strength | Yield Strength | ||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
| 2507/ S32750 |
Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi | |
| Ultimate Tensile Strength | 116 ksi | |
| 0.1% Offset Yield Strength 0.2% | 91 ksi | |
| Elongation in 2 inches, % | 15% | |
| Hardness Rockwell C | 32 | |
| Impact Energy | 74 ft.-lbs | |
| Density | 0.28 lb per inch3 | |
| Modulus of elasticity | 28 x 10(6) psi | |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
| Thermal conductivity | 8.7 Btu/hr ftoF | |
| Heat capacity | 0.12 Btu/ lb oF | |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
Duplex 2205 Round Bar is a remarkable duplex ferritic-austenitic stainless steel bar, enriched with 22% chromium, 3% molybdenum, and 5-6% nickel. This makes it the most widely utilized duplex stainless steel grade, boasting a yield strength that is double that of conventional austenitic grades. It excels in fatigue strength and exhibits outstanding resistance to stress corrosion cracking, crevice, pitting, erosion, and general corrosion even in the most demanding conditions.
Most producers of Duplex 2205 recommend a maximum hot forming temperature between 2010 and 2100°F (1100 to 1150°C). If the workpiece shape is not compact, the edges may cool significantly faster than the bulk, risking cracks in the cooler regions.
Duplex 2205 demonstrates good formability across various fabrications. However, its high strength can pose challenges. Even if the equipment has enough power, allowances must be made for higher spring-back due to the grade's elevated strength.
Crafting excellence in machining, the Duplex Stainless Steel Bar 2205 embodies a slight challenge compared to the 300 series austenitic stainless steels, demanding greater cutting forces and consequently experiencing quicker tool wear. Elevate your machining experience with these pivotal guidelines: A) Employ a robust, rigid machine coupled with an exceptionally strong tool and workpiece mount; B) Minimize vibration by keeping tool extensions short; C) Maintain a precise tool nose radius to ensure the carbide retains a sharp edge while sustaining necessary strength; D) Strategically design the machining sequence to ensure every cut depth remains beneath the work-hardened layer from preceding operations.
Can you manufacture stainless steel grinding bars and rods?
Yes, we specialize in producing stainless steel grinding bars and rods with precise dimensions, exceptional roundness, and straightness. These are far superior to standard polished bars, though the processing costs are higher.
Q1: What products can you offer?
A: We provide a wide array of steel types including 310S, 316L, 304, 304L, 201, and 904L, along with high-nickel alloys 800H and 600H.
Additionally, we offer duplex stainless steels like 2205, 2304, 2101, 2507, among others.
Q2. Can you manufacture products based on my own drawings?
Yes, we can produce products according to your drawings to ensure your complete satisfaction.
Q3. How does your factory handle quality control?
Quality is our top priority. We emphasize stringent quality control measures from the beginning to the end of the production process.
Q4. Can I request changes to packaging and transportation?
Yes, we can alter the form of packaging and transportation based on your request.
However, you will need to cover any additional costs incurred during this period, as well as the price differences.
Q5. How does your factory handle quality control?
Quality is our top priority. We emphasize stringent quality control measures from the beginning to the end of the production process.
Q6. What is your delivery time?
A: Our delivery time typically ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the production schedule.
Q7. What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T upfront and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Let us know your specific needs, and we'll adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. For small pieces, we may cover the courier cost, depending on the requirements.
Q10: Which countries have you exported to?
A: We have exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many others.
){kind=link}