| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR1 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys is recognized as a leading global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and superior cold formability, making it perfect for deep drawing applications. Renowned for its outstanding general and seawater corrosion resistance, it also stands strong against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), a high strength-to-weight ratio, and remarkable corrosion resistance, Grade 1 titanium is an excellent choice for challenging chemical environments. It is the softest and most ductile of commercially pure titanium grades, offering superb cold formability, excellent corrosion resistance, and outstanding weldability, along with good impact hardness.
As premier ASTM B265 Titanium Gr 1 Plate Producers, our offerings include Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates, Titanium Gr 1 Perforated Plates, and Titanium Grade 1 Sheets and Plates, proudly manufactured in China.
We ensure the timely and rapid delivery of Grade 1 titanium plate products. Our speed is backed by a robust system supporting production capacity, information flow, logistics, and capital flow. For instance, our order data is instantly relayed to the logistics system, ensuring seamless data integration. Strategically located near highways and waterways, our processing center enables efficient scheduling, rapid responses, and coordinated storage and transportation. This ensures on-time task completion with efficient loading operations.
Grade 1 titanium plate, known for its lower density and high ductility, is ideal for industries prioritizing weight considerations and deep drawing processes. Key application sectors include medical, chemical equipment, and aerospace industries. Its strength and corrosion resistance make it perfect for marine, chemical processing, and desalination applications. Typical uses of Grade 1 titanium alloys encompass oil and gas components, reaction and pressure vessels, piping systems, power and heat exchangers, linings, flue gas desulfurization systems, and numerous other industrial components. Common standards include ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
For Grade 1 Titanium Plates, the cold rolled thickness ranges from 0.3 mm to 6.0 mm, while the hot rolled thickness ranges from 4.76 mm to 155 mm. These plates are available in hot rolled or heat treated conditions, produced by longitudinal and transverse rolling. If needed, creep flattening can be applied as a heat treatment to relieve internal stresses and meet specific flatness requirements. Plates can be supplied as cut blanks for parts with complex shapes, tailored through either mechanical or chemical processing according to customer requirements.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished metal expert specializing in both small and large-scale titanium plate projects. As your trusted reference point and long-term partner, DAXUN is dedicated to supplying titanium plates and offering extensive technical support to elevate your business. View DAXUN not merely as a supplier of industrial pure titanium and titanium alloy plates, but as a strategic ally committed to overcoming challenges and fulfilling your specific needs, ensuring the success of your project goals.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing. We enhance customer value through basic processing, precision water jet cutting, and efficient plate nesting services, ultimately saving you both time and cost.
Continuous investment in advanced production facilities and strategic capacity agreements with our partners place DAXUN at the pinnacle of titanium plate quality, ensuring we lead the industry both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a renowned manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to create the world's highest-performance titanium alloy plates. We ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks a wide range of alloy titanium plates Grade 5 (UNS R56400) with thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled; 6.0-50mm hot rolled; 50mm and above forged). Grade 5 titanium plate (Ti-6Al-4V) is highly valued for its combination of high strength, ductility, excellent corrosion and high temperature resistance, making it ideal for various general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN standards.
Ti-6Al-4V grade 5 titanium plates are primarily used in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it perfect for deep drawing. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing solutions, including chlorides. Its low density (about half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it a preferred choice for a variety of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, with excellent cold formability, weldability, and impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Grade 1 Sheets, Finished Plates, and Coils. We offer hot rolled, cold rolled, and patterned Titanium Gr 1 plates. Our selection includes perforated plates and comprehensive sheets and plates for various applications. We are the leading manufacturers and suppliers of Titanium Gr 1 in China.
Grade 2
DAXUN produces and maintains a stock of commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the "workhorse" of commercially pure titanium, combining high strength, ductility, and excellent corrosion resistance, suitable for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium that offers a perfect balance of strength and ductility. It features good impact strength, easy weldability, and impressive corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it provides excellent resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and exceptional corrosion resistance make it ideal for a broad range of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred choice for most industrial applications requiring superior ductility and corrosion resistance.
DAXUN is a titan in the metal industry, excelling in small and large titanium plate projects. As your dedicated partner, DAXUN provides high-quality titanium plates and comprehensive technical assistance. Consider DAXUN not just as your supplier of industrial pure titanium and alloy plates, but as your strategic ally, ready to help you overcome challenges and achieve your project goals.
DAXUN's premier service center in China boasts a diverse stock of titanium plate products ready for swift order fulfillment. By offering essential processing, precision water jet cutting, and efficient plate nesting services, we deliver unmatched value, significantly reducing both time and costs for our esteemed customers.
Our relentless investment in DAXUN's cutting-edge production facilities, coupled with strategic capacity agreements with our esteemed partners, ensures that DAXUN remains a leader in titanium plate quality-both now and in the future.
Reach out to DAXUN today to secure the most competitive prices and comprehensive technical insights on our titanium plates.
Q1: What products can you offer?
A: We proudly offer a wide range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and beyond.
Additionally, we provide a comprehensive selection of 400 series stainless steel and high-performance duplex stainless steel such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely! We specialize in customizing products precisely according to your drawings to ensure your utmost satisfaction.
Q3. How does your factory handle quality control?
A: Quality is our top priority. We implement rigorous quality control measures throughout the entire production process, from start to finish.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can accommodate changes to the packaging and transportation methods according to your specific requests,
though you will be responsible for any additional costs incurred during this period, including the difference in price.
Q5. How does your factory handle quality control?
A: Quality is our top priority. We implement rigorous quality control measures throughout the entire production process, from start to finish.
Q6. How long is the delivery time?
A: Delivery time typically ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite production to meet your timeline.
Q7. What are your payment terms?
A: We offer several payment options: 100% T/T in advance, Western Union (for small orders),
B: 30% T/T upfront with the remaining 70% due before shipment,
C: For large orders, 100% Irrevocable LC at sight.
Q8: Can you produce DDQ (Deep Drawing Quality) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Let us know your specific application, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I get a sample?
A: We provide FREE samples for your evaluation and testing. If you need a small piece, we may cover the courier cost depending on the situation.
Q10: To which countries have you exported your products?
A: We have successfully exported our stainless steel materials to various countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}