| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CP Grade 1 Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 1 Plate Length | 1000mm-13000mm or as required |
| Gr 1 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 1 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 1 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 1 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 1 Sheet ASTM | ASTM B265 |
| Titanium Grade 1 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 1 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 1 strip (general) |
| Ti 6Al 4v Grade 1 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Grade 1 ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 1 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 1 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 1 Sheet suppliers |
| Availability of Titanium Alloy Gr 1 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 1 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 1 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 1 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 1 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 1 Clad plate: Alloy Titanium Grade 1 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 1 Plate, etc.ASTM B265 Titanium Alloy Gr 1 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of Grade 1 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
Today, DAXUN Alloys stands as a paramount global producer and supplier of superior Grade 1 titanium plates, epitomizing excellence in quality and reliability.
Pure Grade 1 titanium plates from Daxun offer extraordinary ductility and cold formability, making them perfect for deep drawing. Known for their superior resistance to general and seawater corrosion, as well as oxidizing, neutral, and mildly reducing media-including chlorides-Grade 1 titanium is an excellent choice for harsh chemical conditions. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and remarkable corrosion resistance make it ideal across various industries. Commercially pure Grade 1 titanium is the softest and most ductile titanium, boasting excellent cold formability, superb weldability, and impressive impact hardness.
We specialize in ASTM B265 Titanium Gr 1 Plates, offering a diverse range including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot and Cold Rolled Plates, Patterned and Perforated Plates. As leading manufacturers in China, our portfolio encompasses ASTM B265 Titanium Grade 1 Coils, Sheets, and Plates, meticulously crafted to meet global standards.
At Jiangsu Daxun Alloy Co., Ltd., we pride ourselves on delivering Grade 1 titanium plate products with remarkable speed and efficiency. Our advanced system ensures seamless integration from production capacity to real-time data flow, logistics, and capital management. Strategically located near highways, rivers, and seas, our processing center guarantees rapid response, efficient storage and transportation, and timely task completion through logical scheduling and interconnected operations.
Grade 1 titanium plates' low density and high ductility make them perfect for weight-sensitive industries and deep drawing processes. Key sectors include medical, chemical equipment, and aerospace. The robust strength and corrosion resistance of Grade 1 titanium also make them suitable for marine, chemical processing, and desalination applications. Typical uses include oil and gas components, reaction and pressure vessels, piping systems, power generation, heat exchangers, flue gas desulfurization systems, and various industrial components. Adhering to standards such as ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, and AMS4972, they meet the highest industry requirements.
Our Grade 1 Titanium Plates are available in a cold rolled thickness range of 0.3 mm to 6.0 mm, and hot rolled thickness ranges from 4.76 mm to 155 mm. Produced through longitudinal and transverse rolling, these plates can be supplied in hot rolled or heat-treated conditions. For special flatness requirements, creep flattening can be employed. Plates are available as cut blanks or custom parts tailored to your specifications, with further processing options including mechanical or chemical treatments based on your needs.
About the chemical composition of Ti 6AL-4V Grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN: Your Premier Titanium Specialist for Unmatched Expertise. At DAXUN, we excel in both small and large-scale titanium plate projects, standing as your ultimate reference point and enduring partner. We're committed to delivering top-grade titanium plates and comprehensive technical support to elevate your business. With DAXUN, you're not just acquiring industrial pure titanium and titanium alloy plates; you're forging a strategic alliance designed to help you overcome any obstacles and fulfill your project ambitions.
DAXUN's Chinese Service Center: Swift, Efficient, and Value-Added. Our extensive inventory of titanium plates ensures rapid order fulfillment. We enhance customer satisfaction and optimize costs through core processing techniques, water jet cutting, and plate nesting services-maximizing value and saving you both time and money.
Leading the Future with Continuous Innovation. DAXUN's unwavering investment in cutting-edge production facilities and strategic partnerships positions us as a leader in titanium plate quality, both now and for years to come.
Reach Out to DAXUN Today! Discover the most competitive titanium plate prices and detailed technical insights by contacting us now.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Striving to craft the world's highest-performance titanium alloy plates, we ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN offers a comprehensive stock of alloy titanium plates Grade 5 (UNS R56400) with thicknesses spanning from 0.5mm to 300mm. For thicknesses between 0.5mm-6.0mm, plates are cold rolled; those between 6.0mm-50mm are hot rolled, and plates above 50mm are forged. Renowned as the 'workhorse' of titanium alloy materials, Grade 5 titanium plate (Ti-6Al-4V) embodies superior strength, ductility, outstanding corrosion resistance, and high-temperature endurance, making it a preferred choice across numerous general and military sectors. Compliance includes: ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance components, and marine industry.
Grade 1
Today, DAXUN Alloys has ascended as a leading global producer and supplier of superior Grade 1 titanium plate.
Pure Grade 1 titanium plate exhibits exceptional ductility and cold formability, making it ideal for deep drawing applications. Grade 1 titanium is celebrated for its superior general and seawater corrosion resistance, alongside its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and remarkable corrosion resistance, it stands as a prime choice for diverse harsh chemical environments. Commercially pure, Grade 1 titanium is the softest and most ductile, presenting excellent cold formability, superior corrosion resistance, outstanding weldability, and good impact hardness.
Jiangsu Daxun Alloy Co., Ltd. is a foremost producer of ASTM B265 Titanium Gr 1 Plates. Offering Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates, Titanium Gr 1 Perforated Plates, and Titanium Grade 1 Sheets and Plates, we are the leading manufacturers in China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates of Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is renowned as the 'workhorse' of the commercially pure titanium family, offering a blend of high strength, ductility, and excellent corrosion resistance suitable for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate delivering an optimal balance between strength and ductility. Notable for its significant impact strength and ease of weldability, it boasts impressive corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it offers superior resistance to seawater and salt solutions.
With a low density, high strength-to-weight ratio, and exceptional corrosion resistance, titanium is an ideal material for versatile applications, effectively combating stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is your metal expert for both small and large titanium plate projects. Think of DAXUN as your trusted partner and reference point, ready to supply you with titanium plates and provide any technical assistance required. Beyond being a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic partner, dedicated to overcoming any challenges and meeting your needs to help you achieve your project goals.
At DAXUN, our premier service center in China is fully stocked with high-quality titanium plate products, ready for fast and efficient order processing. Our suite of services-including basic processing, precision water jet cutting, and optimal plate nesting-delivers invaluable added benefits to our customers, significantly reducing both time and costs.
DAXUN's relentless investment in state-of-the-art production facilities and strategic capacity agreements with our partners ensure that we remain at the pinnacle of titanium plate quality, both now and well into the future.
Reach out to DAXUN today to receive the most competitive titanium plate pricing and comprehensive technical data tailored to your needs.
Q1: What products can you offer?
A: We proudly offer a diverse range of steel products, including standard types such as 310S, 316L, 304, 304L, 201, 904L, 316H, and 316.
Additionally, our offerings include 400 series steels and high-quality duplex stainless steels like 2205, 2304, 2101, and 2507, along with specialty high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products tailored to your specific drawings, ensuring maximum satisfaction with the final output.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We rigorously maintain high standards of quality control from the inception of a project to its completion.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can adapt the packaging and transportation methods according to your preferences.
However, you would need to cover any additional costs and price differences incurred during this period.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We rigorously maintain high standards of quality control from the inception of a project to its completion.
Q6. How long is the delivery time?
A: Our standard delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite the process to ensure quicker delivery.
Q7. What are your payment terms?
A: We offer flexible payment options tailored to your needs: 100% T/T in advance, Western Union for small orders,
B: A 30% T/T deposit with the remaining 70% payable before shipment,
C: For larger orders, we also accept 100% Irrevocable LC at sight.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we specialize in DDQ materials suitable for stainless steel pots, sinks, bowls, and more. Simply tell us your requirements, and we will adjust the mechanical properties to meet your specific needs.
Q9: How to get a sample?
A: We offer FREE samples for your evaluation. If you need a small piece, we can also cover the courier cost, depending on the situation.
Q10: To which countries have you exported?
A: We have proudly exported our stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}