| Customization: | Available |
|---|---|
| Type: | Titanium Pipes |
| Application: | Industrial, Medical |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Grade 12 Titanium pipe & Tubes Specification | ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862 |
| Grade 12 Titanium pipe & Tubes Grades | Commercially pure titanium Grade 12- TA2- USN 50400 |
| Grade 12 Titanium pipe & Tubes Type | ot Rolled / Cold Drawn / Welded / ERW |
| Grade 12 Titanium pipe & Tubes Outer Diameter Size | Titanium seamless pipe - φ1.0mm to φ508.3mm |
| Titanium welded pipe - φ1.0mm to φ1219mm | |
| Grade 12 Titanium pipe & Tubes Wall Thickness | 1.0mm-50mm (customizable wall thickness) |
| Grade 12 Titanium pipe & Tubes Length | 5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size. |
| Titanium pipe Form TA2 | ' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc |
| Marking TA2 3.7035 | All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.) |
| Uses of Titanium Alloy Tubes | Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes. |
| Grade 12 Titanium pipe & Tubes Pipe Ends | Plain Ends / Beveled Ends |
| Grade 12 Titanium pipe & Tubes Delivery Conditions | As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered |
| Grade 12 Titanium pipe & Tubes Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Grade 12 Titanium pipe & Tubes Other Testing | ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc. |
| Grade 12 Titanium pipe & Tubes Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME |
| Grade 12 Titanium pipe & Tubes Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Grade 12 Titanium pipe & Tubes Packaging | Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Grade 12 Titanium pipe & Tubes Shipment & Transportation | By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes |
| Grade 12 Titanium pipe & Tubes Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
At Daxun, we perform an array of quality assurance tests to ensure our products meet the highest standards. These tests include flattening, flaring, ultrasonic flaw detection, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. Through rigorous testing, we guarantee that our Grade 1 Titanium Welded Pipe and Grade 1 Titanium Seamless Pipe are fit for their intended applications. Throughout the production process, we meticulously measure the diameter, thickness, and surface of our products to ensure precision. Our standard delivery time is 5-7 days, with special size products requiring 15-20 days.
Should you require additional technical assistance, our resident metallurgist and knowledgeable staff are ready to assist. Daxun is proud to feature a certified testing laboratory, a pioneering facility within the multi-metal and plastic inventory sector. This underscores our unwavering commitment to quality and our philosophy as a full-service supplier.
Titanium Seamless Tubes
Daxun produces:
Hot-finished Titanium Tubes
These tubes are supplied in the form of hot-rolled or hot-extruded, straightened, machined inside and outside diameters, and surface polished. Titanium tubes are available in heat-treated or non-heat-treated forms. Our company has 100% ultrasonic flaw detection capabilities.
Titanium Tube Materials Available:
Hot-rolled Titanium Tubes: OD 19mm to 325mm, wall thickness 9mm to 30mm, length up to 5000mm (to be agreed on a case-by-case basis between the manufacturer and the customer); - Hot-extruded Titanium Tubes: OD 50mm to 160mm, wall thickness 7mm to 35mm, length up to 3000 (to be agreed on a case-by-case basis between the manufacturer and the customer).
Cold-finished Titanium Tubes
Cold-finished Titanium Tubes are supplied in the form of heat-treated, surface-etched, hydrostatically tested, or ultrasonically tested, depending on the requirements of the manufacturing specifications. Tubes Supplied:- OD 6mm to 89mm, wall thickness 0.5mm to 11mm, length up to 6000mm (to be agreed on a case-by-case basis between the manufacturer and the customer).
Titanium Welded Pipes
DaXun manufactures and supplies titanium pipes with diameters from 12.7 mm to 38.1 mm (0.47 in to 1.5 in), wall thickness from 0.4 to 1.65 mm (0.016 in to 0.065 in, depending on diameter), lengths up to 25,000 mm. Electrical Gr1, Gr2, and Gr12 titanium alloy pipes for engineering and chemical industries. Titanium welded pipes are made from flat rolled raw material by automatic tungsten inert gas (argon) welding on electric pipe welders and heat treated on the mill line. Finished titanium welded pipes undergo mechanical testing, geometrical measurements, 100% ultrasonic and eddy current testing, pneumatic or hydrostatic testing; pipes are packed as per customer specifications. Manufacturing processes and inspection test equipment ensure thin wall welded pipes comply with ASTM B 338, ASME SB 338 standards.
The chemical composition of grade 12 Ti 0.3 Mo 0.8 Ni alloy is outlined in the following table.
| Element | Content (%) |
|---|---|
| Nickel, Ni | 0.6 - 0.9 |
| Iron, Fe | 0.3 max |
| Molybdenum, Mo | 0.2 - 0.4 |
| Oxygen, O | 0.25 max |
| Carbon, C | 0.08 max |
| Nitrogen, N | 0.03 max |
| Hydrogen, H | 0.015 max |
| Titanium, Ti | Remainder |
The physical properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 4.50 g/cm3 | 0.163 lb/in3 |
| Melting point | ≤ 1660°C | ≤ 3020°F |
The following table shows mechanical properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 550 MPa | 79800 psi |
| Yield strength | 380 MPa | 55100 psi |
| Poisson's ratio | 0.37 | 0.37 |
| Elastic modulus | 105 GPa | 15200 ksi |
| Shear modulus | 45.0GPa | 6530 ksi |
| Elongation at break | 12 % | 12 % |
| Hardness, Brinell | 180 - 235 | 180 - 235 |
| Hardness, Knoop | 222 | 222 |
| Hardness, Rockwell C | 11 | 11 |
| Hardness, Vickers | 209 | 209 |
The thermal properties of grade 12 Ti 0.3 Mo 0.8 Ni alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (@0.000-100°C/32-212°F) | 8.60 µm/m°C | 4.78 µin/in°F |
| Thermal conductivity | 19 W/mK | 132 BTU in/hr.ft².°F |
The Grade 12 Ti 0.3 Mo 0.8 Ni alloy can be expertly machined using slow speeds, precise coolant flow, and high feed rates. For optimal tooling, high-speed tools are recommended, specifically tungsten carbide tools designated C1-C4 or cobalt-based tools.
This versatile Grade 12 Ti 0.3 Mo 0.8 Ni alloy can be formed both hot and cold, making it suitable for a wide range of applications.
The weldability of Grade 12 Ti 0.3 Mo 0.8 Ni alloy is exceptionally high, ensuring strong and reliable welds.
To anneal Grade 12 Ti 0.3 Mo 0.8 Ni alloy, heat the material to 732-816°C (1350-1500°F), hold for 2 hours, then air cool. For intermediate stress relieving, heat to 538-649°C (1000-1200°F), hold for 1 hour, and air cool.
Rough forging of this alloy can begin at 871°C (1600°F) and should be completed at temperatures ranging from 788-843°C (1450-1550°F).
Hot working significantly enhances the material's overall ductility, making it more pliable and easier to shape.
The cold working characteristics of this material are comparable to those of austenitic stainless steel. Post-work annealing is advised to regain optimal performance properties.
This versatile Grade 12 Ti 0.3 Mo 0.8 Ni alloy is employed in various application areas:
Q1: What products can you offer?
A: We offer a diverse range of steel products including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and a comprehensive assortment from the 300 and 400 series. Additionally, we provide high-nickel alloys like 800H and 600H.
Our repertoire also includes superior duplex stainless steels such as 2205, 2304, 2101, and 2507, ensuring a vast selection to meet your specific needs.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products precisely tailored to your drawings, ensuring complete satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our utmost priority. We maintain stringent quality control measures throughout the entire production process, from start to finish, to guarantee excellence.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we are flexible and can modify the packaging and transportation methods as per your request.
However, please note that additional costs and any price differences incurred will be your responsibility.
Q5. How does your factory do regarding quality control?
A: Quality is our utmost priority. We maintain stringent quality control measures throughout the entire production process, from start to finish, to guarantee excellence.
Q6. How long is the delivery time?
A: Typically, delivery takes 7 to 20 working days after payment confirmation.
For urgent orders, we expedite the process to prioritize your needs.
Q7. What is your payment method?
A: We offer multiple payment options including: 100% T/T in advance or Western Union for smaller orders.
B: 30% T/T upfront with the remaining 70% before shipment.
C: For larger orders, a 100% Irrevocable LC at sight is available.
Q8: Can you provide DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are perfect for producing stainless steel pots, sinks, bowls, and more. Just specify your requirements, and we will adjust the mechanical properties to suit your needs.
Q9: How can I obtain a sample?
A: FREE samples are available for your evaluation. If you need a small piece, we may cover the courier cost depending on the situation.
Q10: Which countries have you exported to?
A: We have proudly exported our stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange for your pickup.
){kind=link}