| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Striving to create the world's highest-performing titanium alloy plates, we ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we produce and stock titanium alloy plates in Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm. For precise craftsmanship, plates between 0.5mm-6.0mm are cold rolled, those from 6.0-50mm are hot rolled, and plates 50mm and above are forged. Known as the 'workhorse' of titanium materials, Grade 5 titanium plate (Ti-6Al-4V) boasts high strength, ductility, and exceptional resistance to corrosion and high temperatures, making it indispensable in both general and military industries. Our products comply with various standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate comprises 90% titanium, 6% aluminum, and 4% vanadium, forming an α-β titanium alloy with aluminum stabilizing the α phase and vanadium stabilizing the β phase. The standout features of Ti-6Al-4V titanium alloy plate include excellent comprehensive performance and superior processing capabilities. This TC4 titanium alloy showcases remarkable strength at both room and elevated temperatures, outstanding creep resistance, thermal stability, high fatigue performance, and resistance to *** growth in seawater. Additionally, it offers satisfactory fracture toughness and resilience against hot salt stress corrosion. The alloy's excellent process plasticity and superplasticity make it suitable for various processing methods, including welding and machining.
Ti-6Al-4V Grade 5 titanium plate finds extensive applications in aerospace, military, power industry, vehicle armor, precision rocket guidance parts, and the marine industry.
The Grade 5 titanium alloy plate is the most commercially accessible among all titanium alloys, combining high strength and toughness. Ti-6Al-4V Grade 5 titanium alloy boasts an array of exceptional properties:
Ti-6AL-4V titanium plates and sheets are ideal for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), coupled with good ductility and lateral strength. Common applications include: 1. Aerospace components such as jet engine compressor blades, disks, rings, fuselage parts like wings, turbine disks, doors, bulkheads, military aircraft heat shields, engine nozzles, landing gear doors, and superplastic forming fuselage parts. 2. Military applications such as armor, guidance systems, and shell casings. 3. Spacecraft parts, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment like bicycle frames and golf clubs. 6. Any application demanding a high strength-to-weight ratio.
At DAXUN, we perform a multitude of quality assurance tests including flattening tests, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests. These rigorous tests ensure our materials meet the stringent requirements of their applications. Throughout production, we meticulously measure diameter, thickness, and surface quality. Our standard delivery time is 5-7 days, with special size products delivered within 15-20 days.
Delving into the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Examining the Chemical Composition of Grade 2 Titanium Sheets
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Unveiling the Mechanical Properties of Grade 2 Titanium Sheets
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a distinguished leader in the metal industry, excelling in both small and large-scale titanium plate projects. As your ultimate reference point and long-term ally, DAXUN is fully prepared to supply your business with top-quality titanium plates and comprehensive technical support. Beyond being a mere supplier of industrial pure titanium and titanium alloy plates, DAXUN stands as your strategic partner, ready to help you overcome any challenges and fulfill all your project requirements. Trust in DAXUN to empower you to achieve your project goals seamlessly and efficiently.
At DAXUN's state-of-the-art service center in China, we maintain an extensive inventory of titanium plate products to ensure rapid order fulfillment. We enhance our offerings through essential processing techniques, including water jet cutting and precision plate nesting, delivering exceptional added value. Our commitment to quality and efficiency translates into significant time and cost savings for our esteemed customers.
DAXUN's relentless investment in cutting-edge production facilities and strategic capacity agreements with industry partners cement our position at the pinnacle of titanium plate quality, both now and in the future. We remain dedicated to excellence in every facet of our operations, continually advancing to meet and exceed industry standards.
Reach out to DAXUN today to receive the most competitive titanium plate prices and the latest technical insights. Our team is ready to provide you with unparalleled service and support, ensuring you have all the information you need to make informed decisions.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to produce world-class, high-performance titanium alloy plates with rapid global delivery - ASTM B265 Grade 2, Grade 5 Titanium Plates. DAXUN maintains a robust inventory of alloy titanium plates Grade 5 (UNS R56400), with thicknesses ranging from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0-50mm are hot rolled, and 50mm and above are forged. Grade 5 titanium plate (Ti-6Al-4V) stands out due to its high strength, ductility, excellent corrosion resistance, and high-temperature tolerance, making it indispensable in both general and military industries. Our products comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN standards, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
Today, DAXUN Alloys is a preeminent global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it ideal for deep drawing applications. Renowned for its outstanding general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media (solutions), including chlorides. With its low density (about half that of nickel-based alloys), high strength-to-weight ratio, and unparalleled corrosion resistance, it is an excellent choice for a multitude of harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent cold formability, exceptional corrosion resistance, superb weldability, and good impact toughness.
We are a leading producer of ASTM B265 Titanium Grade 1 Plates, Sheets, Coils, and Finished Products in China. Our offerings include hot and cold rolled plates, patterned and perforated plates, and more. As a trusted supplier, we provide high-quality titanium products that meet the rigorous standards of ASTM B265.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) with thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the cornerstone of the commercially pure titanium family, offering a perfect blend of high strength, ductility, and excellent corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering a fantastic balance of strength and ductility. It boasts excellent impact strength, is easily weldable, and provides robust corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. It also offers superior resistance to seawater and salt solutions.
With its low density, high strength-to-weight ratio, and remarkable corrosion resistance, titanium is an ideal solution for a broad range of applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, it is the alloy of choice for most industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is your metal expert for both small and large titanium plate projects. As your go-to reference point and long-term partner, DAXUN stands ready to supply titanium plates and provide any technical assistance you may require. Consider DAXUN not just as a supplier of industrial pure titanium plates and titanium alloy plates, but also as your strategic partner, committed to helping you overcome any challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our DAXUN service center in China maintains a substantial inventory of titanium plate products, ensuring rapid order fulfillment. By offering essential processing services, precise water jet cutting, and efficient plate nesting solutions, we deliver exceptional added value to our customers, significantly reducing their time expenditure and overall costs.
Through relentless investment in cutting-edge production facilities and strategic capacity agreements with trusted partners, Jiangsu Daxun Alloy Co., Ltd. guarantees that DAXUN remains a leader in titanium plate quality, both now and into the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to secure the most competitive pricing and comprehensive technical information on our premium titanium plates.
){kind=link}