Customization: | Available |
---|---|
Type: | Titanium Sheets |
Application: | Industrial |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
Titanium Grade 5 Sheet ASTM | ASTM B265 |
Titanium Grade 5 Sheet AMS | AMS 4902 |
Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
Width: Up to 500 mm (19.5 in) | |
Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
Plasma profiles | As per customer's drawings |
Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
UNS R56400 Plate Origin | CHINA |
Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
Test | UT, SGS testing, TUV etc |
Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN, a distinguished Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, is dedicated to producing high-performance titanium alloy plates for global markets. With a commitment to delivering quickly worldwide, we specialize in ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a comprehensive inventory of alloy titanium plates, featuring Grade 5 (UNS R56400) with thicknesses varying from 0.5mm to 300mm. Plates with thicknesses from 0.5mm to 6.0mm are cold rolled, those between 6.0mm and 50mm are hot rolled, and plates above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) stands out as the 'workhorse' among titanium alloys, offering a remarkable blend of high strength, ductility, and exceptional resistance to corrosion and extreme temperatures. This makes it an ideal choice for both general and military industries. Our plates comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate, composed of 90% titanium, 6% aluminum, and 4% vanadium, is an α-β titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. This alloy is renowned for its superb overall performance and excellent process capabilities. Its outstanding attributes include high strength at both room and elevated temperatures, superior creep resistance, and excellent thermal stability. Additionally, it offers high fatigue performance and *** growth resistance in seawater, along with satisfactory fracture toughness and hot salt stress corrosion resistance. Ti-6Al-4V titanium plates are also praised for their superb process plasticity and superplasticity, making them suitable for a wide range of processing methods, welding, and machining applications.
The primary applications of the Ti-6Al-4V Grade 5 titanium plate span across various industries, including aerospace, military, power generation, vehicle armor, and marine sectors.
The Grade 5 titanium alloy plate is widely recognized as the most commercially available titanium alloy, combining superior strength and toughness. Ti-6Al-4V Grade 5 titanium alloy boasts excellent comprehensive properties:
Ti-6Al-4V titanium plates and sheets are designed for components requiring high corrosion resistance, stress corrosion resistance, and high strength (400-450°C), while maintaining good ductility and lateral strength. Common applications include: 1. Jet engine compressor blades, disks, rings, and structural components like wings, fuselages, turbine disks, doors, bulkheads, heat shields for military aircraft, hardware, engine nozzles, landing gear doors, and superplastic forming parts. 2. Military applications such as armor, guidance systems, and shell casings. 3. Spacecraft parts, including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment like bicycle frames and golf clubs. 6. Any applications requiring a high strength-to-weight ratio.
At Daxun, quality assurance is paramount. We conduct an array of rigorous tests, including flattening, pitting, resistance, mechanical, hardness, material positive identification, and expansion tests. These ensure the material's suitability for its intended applications. Throughout the production process, we meticulously measure the product's diameter, thickness, and surface. Our standard delivery timeframe is 5-7 days, with special size products taking 15-20 days.
Delve into the precise chemical composition of our superior Ti 6AL-4V Grade 5 Titanium Sheet, crafted for the highest performance in demanding applications.
Chemical Composition: | |||
Symbol | Element | Min % | Max % |
Al | Aluminum | 5.50% | 6.75% |
V | Vanadium | 3.50% | 4.50% |
Fe | Iron | 0.30% | |
O | Oxygen | 0.20% | |
C | Carbon | 0.08% | |
N | Nitrogen | 0.05% | |
H | Hydrogen | 0.01% | |
Y | Yttrium | 0.01% | |
Other, each | 0.10% | ||
Other, total | 0.40% | ||
Ti | Titanium | Remainder |
Physical Properties | Metric | English | Comments |
Density | 4.43 g/cc | 0.16 lb/in³ | |
Mechanical Properties | |||
Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
Hardness, Rockwell C | 36 | 36 | |
Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
Tensile strength | min. 895MPa | 129810 psi | |
Yield strength | min. 828MPa | 120090 psi | |
Elongation at Break | min.10 % | 10 % | |
Reduction of Area | min.25 % | 25 % |
Uncover the detailed chemical composition that makes our Grade 2 Titanium Sheet a reliable choice for various industrial uses.
Element | Weight % |
C | ≤0.08 |
O | ≤0.25 |
N | ≤0.03 |
H | ≤0.015 |
Fe | ≤0.30 |
*OEE | ≤0.10 |
*OET | ≤0.40 |
Ti | Remaining |
Examine the outstanding mechanical properties that define our Grade 2 Titanium Sheet, ensuring superior performance and reliability.
Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
psi | MPa | ksi | psi | MPa | ksi | % | |||||||
Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
50,000 |
Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
Fe | 0.2 | ||
O | 0.18 | ||
C | 0.08 | ||
N | 0.03 | ||
H | 0.015 | ||
Ti | Balance |
Density | |
lb/in3 | g/cm3 |
0.163 | 4.51 |
Tensile Strength | |
ksi | MPa |
35 min | 240 min |
Yield Strength | |
ksi | MPa |
20 min | 138 min |
Hardness | |
70 HRC max | |
Elongation | |
24% min |
Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
---|---|---|---|
Al | 2.5 | 3.5 | |
V | 2.0 | 3.0 | |
Fe | 0.25 | ||
O | 0.15 | ||
C | 0.08 | ||
N | 0.03 | ||
H | 0.015 | ||
Ti | Balance |
DAXUN is a distinguished expert in the realm of metal, renowned for its proficiency in both small and extensive titanium plate projects. As a pivotal reference point and a dependable, long-term partner, DAXUN is steadfastly committed to supplying your business with superior titanium plates and providing comprehensive technical support. Envision DAXUN not merely as a supplier of industrial pure titanium and titanium alloy plates, but as a strategic ally dedicated to overcoming any challenges and fulfilling your needs. Ultimately, DAXUN aims to propel you toward the successful realization of your project goals.
DAXUN's state-of-the-art service center in China boasts a robust stock of titanium plate products, ensuring swift order processing to meet your demands. With our advanced offerings such as basic processing, water jet cutting, and plate nesting, we deliver unparalleled value, significantly saving our clients both time and costs.
DAXUN's relentless investment in cutting-edge production facilities, coupled with strategic capacity agreements with our partners, positions us at the pinnacle of titanium plate quality today and for the foreseeable future.
Reach out to DAXUN today to access the most competitive prices and in-depth technical information on our titanium plates.
GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
Physical Properties | Metric | English | Comments |
Density | 4.43 g/cc | 0.16 lb/in³ | |
Mechanical Properties | |||
Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
Hardness, Rockwell C | 36 | 36 | |
Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
Tensile strength | min. 895MPa | 129810 psi | |
Yield strength | min. 828MPa | 120090 psi | |
Elongation at Break | min.10 % | 10 % | |
Reduction of Area | min.25 % | 25 % | |
Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
Compressive Yield Strength | 970 MPa | 141000 psi | |
Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
Poisson's Ratio | 0.342 | 0.342 | |
Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
Shear Modulus | 44 GPa | 6380 ksi | |
Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
Electrical Properties | |||
Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
Thermal Properties | |||
CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
Solidus | 1604 °C | 2920 °F | |
Liquidus | 1660 °C | 3020 °F | |
Beta Transus | 980 °C | 1800 °F |
DAXUN is a leading manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to create the world's highest-performance titanium alloy plates. We offer swift worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and produces alloy titanium plates Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm cold-rolled, 6.0-50mm hot-rolled, and 50mm and above forged). Grade 5 titanium plate (Ti-6Al-4V) is the cornerstone of titanium alloy materials, renowned for its high strength, ductility, and excellent corrosion and high-temperature resistance. Favored by many general and military industries, it complies with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate is primarily used in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it perfect for deep drawing applications. Grade 1 titanium is celebrated for its outstanding general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (about half that of nickel-based alloys), a high strength-to-weight ratio, and exceptional corrosion resistance, it is an ideal choice for a broad range of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering good cold formability, excellent corrosion resistance, and exceptional weldability with notable impact hardness.
Producers and suppliers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Titanium Gr 1 Finished Plates. Find Titanium Gr 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Gr 1 Cold Rolled Plates, and Titanium ASTM B265 Gr 1 Sheets here. We also offer Gr 1 Titanium Patterned Plates, Titanium Gr 1 Perforated Plates, and Titanium Grade 1 Sheets and Plates from China.
Grade 2
DAXUN manufactures and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the mainstay of the commercially pure titanium family, combining high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate is an excellent balance of strength and ductility, offering good impact strength and ease of welding. It is highly resistant to corrosion in oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also has outstanding resistance to seawater and salt solutions.
With low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is ideal for diverse applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plate, with a melting point of 1660°C, is the preferred alloy for most industrial applications demanding good ductility and corrosion resistance.
DAXUN is a specialist in both small and large titanium plate projects. As your dependable reference point and long-term partner, DAXUN is ready to supply you with titanium plates and offer any technical assistance you require. Beyond being a supplier of industrial pure titanium and titanium alloy plates, DAXUN is your strategic partner, committed to helping you overcome any challenges and meet your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our DAXUN service center in China boasts an extensive inventory of titanium plate products, ready for swift order processing. By leveraging our capabilities in basic processing, precision water jet cutting, and efficient plate nesting, we deliver exceptional value to our customers, ultimately saving them both time and money.
Our unwavering commitment to continuous investment in production facilities, coupled with strategic capacity agreements with our partners, ensures that Jiangsu Daxun Alloy Co., Ltd. remains a leader in titanium plate quality both now and into the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today for the most up-to-date titanium plate prices and comprehensive technical information. Experience the excellence of DAXUN products and customer service.