| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
At DAXUN, we pride ourselves on producing and maintaining a stock of commercially pure titanium plates in grades Gr1, Gr2, Gr3, and Gr4 (UNS). These plates, with thicknesses ranging from a delicate 0.5 mm to a robust 120 mm, stand as the cornerstone of the commercially pure titanium family. Renowned for their unparalleled combination of high strength, ductility, and outstanding corrosion resistance, these plates meet the rigorous demands of various industrial applications.
Our Gr1, Gr2, Gr3, and Gr4 titanium plates epitomize the purity of commercially pure titanium. They strike a perfect balance between strength and ductility, boasting impressive impact strength and weldability. Their superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet *** ensures their durability. Additionally, their excellent resistance to seawater and salt solutions highlights their versatility and reliability.
The Gr5 grade5 Ti6Al4V titanium alloy plate is a marvel of engineering. Comprising 90% titanium, 6% aluminum, and 4% vanadium, this α-β type alloy leverages aluminum to stabilize the α phase and vanadium to stabilize the β phase. The Gr5 Ti-6Al-4V titanium alloy plate stands out with its exceptional comprehensive performance and process efficiency. Known as TC4, this alloy offers remarkable room and high-temperature strength, excellent creep resistance, superior thermal stability, high fatigue performance, and *** growth resistance in seawater. Its impressive fracture toughness and hot salt stress corrosion resistance, coupled with its outstanding process plasticity and superplasticity, make it ideal for a myriad of processing, welding, and machining methods.
Exploring the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Examining the Chemical Composition of Grade 2 TitaniumSheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Understanding the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This exceptional plate is meticulously produced through a plate rolling process, with the final rolling step executed via cold rolling. The sheets are available in either a work-hardened or heat-treated condition, ensuring optimal performance. Additional processing, whether mechanical or chemical, is tailored to meet the precise requirements of our discerning customers. 2. Hot-Rolled Titanium Plate: Crafted through both longitudinal rolling and a combination of longitudinal and transverse rolling, our hot-rolled titanium plates boast thicknesses ranging from 3.0mm to 155mm. These plates are supplied in a heat-treated condition, with optional creep flattening available to eliminate internal stresses and meet stringent flatness specifications. We offer sheets as cut blanks, allowing for complex shaped parts derived from the parent metal. Subsequent processing is customized to fulfill the customer's exacting demands.3. Forged Titanium Plate: Our forged titanium plates are manufactured by forging steel ingots on a vertical hydraulic press and then rolling them, or through open die forging followed by rolling. Standard slab dimensions include thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. The specific dimensions and weight of the forged plates are determined through mutual agreement between the manufacturer and the customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6AL-4V (Grade 5) TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China! Our mission is to produce the world's highest-performing titanium alloy plates. We ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN's alloy titanium plates (Grade 5, UNS R56400) are available in thicknesses from 0.5mm to 300mm. Plates from 0.5mm-6.0mm are cold rolled, 6.0-50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the "workhorse" of titanium alloy materials, thanks to its high strength, ductility, and exceptional corrosion and high-temperature resistance. This makes it a preferred choice for many general and military industries. Our products comply with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
The Ti-6Al-4V Grade 5 Titanium Plate is primarily deployed in aerospace, military sectors, power industries, vehicle armor, rocket precision guidance systems, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it perfect for deep drawing applications. Known for its superb general and seawater corrosion resistance, Grade 1 titanium effectively resists oxidizing, neutral, and mildly reducing environments, including chlorides. With low density (nearly half that of nickel-based alloys), a high strength-to-weight ratio, and robust corrosion resistance, it excels in various harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile variant, offering outstanding cold formability, corrosion resistance, weldability, and impact hardness.
We are esteemed ASTM B265 Titanium Gr 1 Plate Producers, supplying Titanium Gr 1 Sheets, Finished Plates, Grade 1 Coil, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and Titanium Grade 1 Sheets and Plates. As leading manufacturers in China, we ensure quality and precision in every product.
Grade 2
DAXUN specializes in producing and stocking commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. The Grade 2 Titanium Plate (UNS R50400) is recognized as the "workhorse" of the commercially pure titanium category, offering a perfect blend of high strength, ductility, and impressive corrosion resistance across numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure, versatile titanium plate, delivering a balanced mix of strength and ductility. It offers significant impact strength and excellent weldability. The plate excels in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Moreover, it demonstrates excellent resistance to seawater and salt solutions, making it a reliable choice for various industrial applications.
With its low density, high strength-to-weight ratio, and superior corrosion resistance, titanium is ideal for numerous applications. The Grade 2 Titanium Plate resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C and has a melting point of 1660°C, making it the alloy of choice for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is a trusted expert in metal, dedicated to both small and large titanium plate projects. Beyond being a supplier, DAXUN is your reference point and long-term strategic partner, ready to support your business with high-quality titanium plates and any technical assistance you may need. Consider DAXUN as your partner in overcoming challenges and achieving your project goals with our comprehensive solutions and unwavering commitment.
At DAXUN, our service center in China is fully stocked with titanium plate products, enabling swift order fulfillment. By offering basic processing, precision water jet cutting, and efficient plate nesting solutions, we add significant value for our customers, helping them save both time and money.
DAXUN is dedicated to maintaining its leadership in titanium plate quality through continuous investment in our advanced production facilities and strategic capacity agreements with trusted partners. Our commitment ensures that we remain at the pinnacle of quality today and for the future.
Reach out to DAXUN today to discover the most competitive prices and obtain detailed technical information on our premium titanium plates.
Q1: What products can you offer?
A: We offer a wide range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and
400 series. Additionally, we provide duplex stainless steel like 2205, 2304, 2101, 2507, and high-nickel alloys such as 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products precisely according to your custom drawings to ensure your utmost satisfaction.
Q3. How does your factory do regarding quality control?
A: Quality is our top priority. We meticulously control quality from the beginning of the production process to the very end.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can adjust the packaging and transportation forms to meet your specific requests,
though you will need to cover any additional costs and the price differences incurred during this process.
Q5. How does your factory do regarding quality control?
A: Quality is our top priority. We meticulously control quality from the beginning of the production process to the very end.
Q6. How long is the delivery time?
A: The standard delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite the process to meet your needs.
Q7. What is your payment policy?
A: We accept 100% T/T in advance and Western Union for small orders.
B: For larger orders, 30% T/T upfront and 70% balance before shipment.
C: We also accept 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Tell us your application, and we'll tailor the mechanical properties accordingly.
Q9: How to get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to various countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange a pickup for you.
){kind=link}