| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | Gr5 Ti-6al-4V Gr7 Gr9 Gr23 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Jiangsu Daxun Alloy Co., Ltd. specializes in the production and stocking of commercially pure titanium plates Gr1, Gr2, Gr3, Gr4 (UNS) with a wide range of thicknesses from 0.5 mm to 120 mm. These grades represent the pinnacle of the commercially pure titanium family, offering a harmonious blend of high strength, exceptional ductility, and outstanding corrosion resistance, making them ideal for a multitude of industrial applications.
The Gr1, Gr2, Gr3, Gr4 titanium plates stand out as commercially pure titanium plates that strike an excellent balance between strength and ductility. They exhibit remarkable impact strength and weldability while providing superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Additionally, they offer excellent resistance to seawater and salt solutions, making them ideal for various challenging environments.
The Gr5 Grade 5 Ti-6Al-4V titanium alloy plate, containing 90% titanium, 6% aluminum, and 4% vanadium, is an α-β type titanium alloy. In this alloy, aluminum stabilizes the α phase, while vanadium stabilizes the β phase. The Gr5 Ti-6Al-4V titanium alloy plate is renowned for its excellent comprehensive performance and favorable processing characteristics. This alloy demonstrates outstanding strength at both room and high temperatures, impressive creep resistance, thermal stability, high fatigue performance, and resistance to *** growth in seawater. Furthermore, it offers satisfactory fracture toughness and exceptional resistance to hot salt stress corrosion. With excellent process plasticity and superplasticity, the Gr5 Ti-6Al-4V titanium alloy plate is suitable for various processing and welding methods.
About the chemical composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 Titanium Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Crafted through a meticulous plate rolling process, the final stage of this plate's production is cold rolling. These sheets are available in either work-hardened or heat-treated conditions. Depending on your specific requirements, further processing can involve mechanical or chemical methods to achieve the desired specifications. 2. Hot-Rolled Titanium Plate: Manufactured by both longitudinal and longitudinal-transverse rolling techniques, these plates come in thicknesses ranging from 3.0mm to 155mm and are supplied in a heat-treated state. If needed, creep flattening can be performed as part of the heat treatment to eliminate internal stresses and meet specific flatness demands. These plates can also be provided as cut blanks, tailored into complex shapes as per customer specifications.3. Forged Titanium Plate: Produced by forging steel ingots on vertical hydraulic presses followed by rolling, or via open die forging alone or combined with rolling. Standard dimensions for slabs include thicknesses up to 580mm, widths up to 2000mm, and lengths up to 6000mm. The exact dimensions and weights of the forged plates are custom-agreed between the manufacturer and the customer, ensuring precise adherence to your requirements.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier based in China. Our mission is to create the world's finest high-performance titanium alloy plates. We ensure rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN proudly produces and stocks Grade 5 alloy titanium plates (UNS R56400) in thicknesses ranging from 0.5mm to 300mm (with 0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm and above forged). Grade 5 titanium plate (Ti-6Al-4V) is the industry standard, offering exceptional strength, ductility, superior corrosion resistance, and high-temperature resilience. It is highly sought after by both general and military industries. Our products adhere to stringent standards, including ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, among others.
The Ti-6Al-4V grade 5 titanium plate is primarily utilized in aerospace, military, power industries, vehicle armor, rocket precision guidance systems, and the marine sector.
Grade 1
DAXUN Alloys stands as a leading global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate offers outstanding ductility and cold formability, making it perfect for deep drawing applications. Known for its remarkable general and seawater corrosion resistance, Grade 1 titanium withstands oxidizing, neutral, and mildly reducing media, including chlorides. With a density roughly half that of nickel-based alloys, its high strength-to-weight ratio and exceptional corrosion resistance make it ideal for challenging chemical environments. Commercially pure Grade 1 titanium is the most soft and ductile, boasting excellent cold formability, superb corrosion resistance, excellent weldability, and impressive impact hardness.
We are distinguished ASTM B265 Titanium Gr 1 Plate Producers offering a variety of products, including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. As leading manufacturers and dealers based in China, we ensure the highest quality and standards.
Grade 2
DAXUN offers and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the cornerstone of the commercially pure titanium family, blending high strength, ductility, and outstanding corrosion resistance for a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium offering an excellent balance of strength and ductility. It has impressive impact strength, is easily weldable, and offers excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Additionally, it resists corrosion from seawater and salt solutions efficiently.
With a low density, high strength-to-weight ratio, and robust corrosion resistance, titanium is an ideal material for diverse applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred choice for most industrial applications requiring good ductility and corrosion resistance.
DAXUN is a titan in the realm of titanium plate projects, whether large or small. We are your ultimate reference point and long-term partner, committed to providing high-quality titanium plates and exceptional technical assistance. DAXUN is more than just a supplier; we are your strategic ally dedicated to overcoming challenges and meeting your project requirements, ensuring your success.
At DAXUN's premier service center in China, we maintain an extensive stock of titanium plate products, ensuring rapid order processing. Our comprehensive offerings include basic processing, precision water jet cutting, and efficient plate nesting solutions. These services significantly enhance value for our esteemed customers, optimizing both time and cost savings.
DAXUN's unwavering commitment to excellence is reflected in our continuous investment in state-of-the-art production facilities. Coupled with strategic capacity agreements with our esteemed partners, this dedication ensures that DAXUN remains at the cutting edge of titanium plate quality, both now and in the future.
Reach out to DAXUN today to access the most competitive prices and detailed technical information on our titanium plate offerings. Experience the superior quality and service that set us apart in the industry.
Q1: What products can you offer?
A: We offer a wide range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L.
Additionally, we provide 400 series and duplex stainless steel options such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Yes, we can produce the products according to your drawings to meet your specific requirements.
Q3: How does your factory maintain quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control measures from start to finish.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation forms according to your request.
However, please note that you will need to cover any additional costs and spreads incurred during this period.
Q5: How does your factory maintain quality control?
A: Quality is our top priority. We consistently emphasize stringent quality control measures from start to finish.
Q6: How long is the delivery time?
A: Our standard delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we will expedite the process to meet your timeline.
Q7: What are your payment terms?
A: We offer the following payment options:
B: 30% T/T in advance and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Let us know your specific usage, and we will adjust the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for your inspection and testing. For small pieces, we may cover courier costs, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to various countries, including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}