| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade 2 | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 2 Plate Length | 1000mm-13000mm or as required |
| Gr 2 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R50400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 2 Plate Process | Hot/ Cold Rolled/forging |
| UNS R50400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 2 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium grade 2 Sheet ASTM | ASTM B265 |
| Titanium grade 2 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 2 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 2 strip (general) |
| Cp Grade 2 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard 3.7035 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 2 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 2 Titanium Plate 3.0-60.0 mm | |
| UNS R50400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 2 Sheet suppliers |
| Availability of Titanium Alloy Gr 2 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 2 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 2 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 2 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 2 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 2 Clad plate: Alloy Titanium Grade 2 Clad plate is a composite steel plate made by bonding UNS R50400 Titanium Grade 2 Plate, etc.ASTM B265 Titanium Alloy Gr 2 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R50400 Plate Origin | CHINA |
| Packing of DIN 3.7035 plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R50400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN produces and stocks commercially pure titanium plates, Grade 2 (UNS R50400), in thicknesses ranging from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) combines high strength, impressive ductility, and outstanding corrosion resistance, making it perfect for a multitude of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate offering an excellent balance between strength and ductility. It features good impact strength, easy weldability, and superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also excels in resisting corrosion in seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal material for a myriad of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for most industrial applications demanding good ductility and corrosion resistance.
Grade 2 Titanium Plate has a lower density, making it perfect for weight-sensitive applications. Key industries include medical, chemical equipment, and aerospace. The strength and corrosion resistance of Grade 2 Titanium Plate also make it ideal for marine, chemical processing, and desalination industries. Typical applications include oil and gas components, reaction and pressure vessels, piping systems, power, heat exchangers, linings, flue gas desulfurization systems, and many other industrial components. Common standards: ASTM B265, ASTM F67, AMS4911, AMS4928, AMS4943, AMS4944, AMS4945, AMS4967, AMS4972.
DAXUN conducts multiple quality assurance tests, including flattening, pitting and resistance tests, mechanical tests, hardness tests, material positive identification, and expansion tests. These tests ensure the material's suitability for required applications. During production, we measure the diameter, thickness, and surface of the product. Our standard delivery time is 5-7 days, with special size product deliveries taking 15-20 days.
Titanium Grade 2 Plates are available in cold-rolled thicknesses from 0.3 mm to 6.0 mm and in hot-rolled or heat-treated conditions. Hot-rolled thicknesses range from 4.76 mm to 155 mm. Plates are produced by longitudinal and transverse rolling and can be supplied in cut blank form for parts with complex shapes. Further processing depends on customer requirements, which can be either mechanical or chemical. Creep flattening can be used as a heat treatment to relieve internal stresses and meet special flatness requirements.
About the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the Chemical Composition of Grade 2 Titanium Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is the ultimate authority in the titanium industry, adept at handling both small and large-scale titanium plate projects. As your indispensable reference point and long-term ally, DAXUN is always prepared to supply your business with top-tier titanium plates and unparalleled technical assistance. Envision DAXUN not merely as your supplier of industrial pure titanium and alloy plates, but as your key strategic partner. We stand by your side to surmount any challenge and fulfill every need, empowering you to reach your project milestones with ease.
DAXUN's premier service center in China proudly maintains a robust stock of titanium plate products, ensuring rapid order processing. Our comprehensive services include basic processing, precision water jet cutting, and expert plate nesting, all designed to deliver maximum value to our customers, reducing both time and costs efficiently.
At DAXUN, continuous investment in state-of-the-art production facilities and strategic capacity agreements with our partners guarantee that we maintain our leadership in titanium plate quality, both now and in the future.
Contact DAXUN today to receive the most competitive titanium plate prices and detailed technical information.
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN, a renowned Ti-6AL-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, aims to revolutionize the world of high-performance titanium alloy plates. Offering rapid worldwide delivery, our ASTM B265 Grade 2 and Grade 5 Titanium Plates are engineered for excellence. We stock Grade 5 alloy titanium plates (UNS R56400) in thicknesses from 0.5mm to 300mm, with 0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and 50mm and above forged. Known as the 'workhorse' of titanium alloy materials, Grade 5 titanium plate (Ti-6Al-4V) boasts high strength, ductility, and superior corrosion and high-temperature resistance, making it indispensable for general and military industries. Compliance with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN ensures unmatched reliability.
The Ti-6Al-4V Grade 5 titanium plate excels in aerospace, military industries, power industries, vehicle armor, rocket precision guidance parts, and marine industries, showcasing its versatile strength and durability.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of superior Grade 1 titanium plates, known for their impeccable quality.
Our Pure Grade 1 titanium plate is celebrated for its exceptional ductility and cold formability, perfect for deep drawing applications. It offers remarkable general and seawater corrosion resistance, as well as resilience against oxidizing, neutral, and mildly reducing media, including chlorides. With a low density (approximately half that of nickel-based alloys), an excellent strength-to-weight ratio, and extraordinary corrosion resistance, Grade 1 titanium is ideal for a multitude of challenging chemical environments. As the softest and most ductile commercially pure titanium, Grade 1 is easily cold formable, weldable, and displays impressive impact hardness.
We are proud to be among the top ASTM B265 Titanium Grade 1 Plate Producers, offering a variety of titanium products including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. As a leading manufacturer in China, we ensure top-tier quality and performance in all our titanium offerings.
Grade 2
DAXUN supplies and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Recognized as the 'workhorse' of commercially pure titanium, Grade 2 offers an exceptional blend of strength, ductility, and corrosion resistance, suitable for a wide range of industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, strikes a perfect balance between strength and ductility. It delivers robust impact strength and weldability, excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, wet ***, and exceptional resilience against seawater and salt solutions.
With titanium's low density, high strength-to-weight ratio, and outstanding corrosion resistance, it is an optimal choice for numerous applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Boasting a melting point of 1660°C, it is the preferred alloy for most industrial needs requiring excellent ductility and corrosion resistance.
DAXUN stands out as a metal expert, dedicated to both small and large titanium plate projects. As your trusted reference point and long-term partner, DAXUN is prepared to supply you with top-quality titanium plates and provide any technical assistance required. Beyond being a supplier of industrial pure titanium plates and titanium alloy plates, DAXUN is your strategic ally, committed to overcoming any challenges and fulfilling your project needs, ensuring the realization of your goals.
At DAXUN, our China-based service center boasts an extensive inventory of titanium plate products, enabling swift order processing. We enhance customer value through fundamental processing techniques, precision water jet cutting, and efficient plate nesting, thus saving both time and costs for our clients.
DAXUN continually invests in state-of-the-art production facilities and solidifies capacity agreements with our strategic partners. This commitment ensures that DAXUN remains a leader in titanium plate quality today and well into the future.
Reach out to DAXUN today to access up-to-date pricing and comprehensive technical details on our superior titanium plate products.
Q1: What products can you offer?
A: We proudly present a diverse range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, our offerings extend to the 300 and 400 series as well as duplex stainless steel variants such as 2205, 2304, 2101, and 2507. We also specialize in 800H and 600H high-nickel alloys.
Q2: Can you produce the products according to my own drawings?
A: Absolutely! We can manufacture products tailored to your specific drawings, ensuring they meet your exact satisfaction.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We meticulously manage quality control from the initial stages to the final production to guarantee excellence.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can adapt the packaging and transportation methods based on your requests.
However, you'll need to cover any additional costs and differences incurred during this process.
Q5: How does your factory handle quality control?
A: Quality is our top priority. We meticulously manage quality control from the initial stages to the final production to guarantee excellence.
Q6: How long is the delivery time?
A: Typically, it takes 7 to 20 working days after payment confirmation.
If your order is urgent, we will expedite our processes to meet your timeline.
Q7: What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for manufacturing stainless steel pots, sinks, bowls, etc. Let us know your specific application, and we will adjust the mechanical properties to meet your needs.
Q9: How can I get a sample?
A: We offer FREE samples for your evaluation. If you need a small piece, we may cover the courier cost depending on the situation.
Q10: To which countries have you exported?
A: To date, our stainless steel materials have been exported to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many others.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange your pick-up from there.
){kind=link}