| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Jiangsu Daxun Alloy Co., Ltd. specializes in producing and maintaining a robust inventory of commercially pure titanium plates including Gr1, Gr2, Gr3, and Gr4 (UNS). These plates, with thicknesses ranging from 0.5 mm to 120 mm, are the cornerstone of the commercially pure titanium family. They boast an impressive blend of high strength, exceptional ductility, and outstanding corrosion resistance, making them indispensable for a multitude of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates, celebrated as commercially pure titanium plates, strike a perfect balance between strength and ductility. These plates exhibit impressive impact strength and weldability, along with superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. Their remarkable resistance to seawater and salt solutions further underscores their versatility and reliability.
The Gr5 Grade 5 Ti-6Al-4V titanium alloy plate, encompassing 90% titanium, 6% aluminum, and 4% vanadium, is an α-β type titanium alloy. Here, aluminum stabilizes the α phase, while vanadium stabilizes the β phase. Renowned for its exceptional comprehensive performance and excellent process capabilities, the Gr5 Ti-6Al-4V plate excels in room and high-temperature strength, creep resistance, thermal stability, and fatigue performance. Its resistance to *** growth in seawater and satisfactory fracture toughness further enhance its application. Additionally, it boasts outstanding process plasticity and superplasticity, suitable for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) Grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: These plates are meticulously crafted through a precise plate rolling process, with the final rolling stage being cold rolling. Sheets are available in either work-hardened or heat-treated conditions. Subsequent processing can be tailored to customer specifications, whether mechanical or chemical, ensuring utmost versatility and customizability. 2. Hot-Rolled Titanium Plate: Manufactured by both longitudinal and transverse rolling techniques, these plates boast thicknesses ranging from 3.0mm to 155mm and are supplied in a heat-treated state. For specific requirements, creep flattening can be employed as a heat treatment method to remove internal stress and meet unique flatness specifications. Customizable, these plates can be supplied as cut blanks, tailored into complex shapes cut from the parent metal, perfectly aligning with the customer's needs.3. Forged Titanium Plate: Crafted through a meticulous process involving forging steel ingots on a vertical hydraulic press followed by rolling, or utilizing open die forging techniques, these plates are available in impressive dimensions: thickness up to 580 mm, width up to 2000 mm, and length up to 6000 mm. The exact dimensions and weight of forged plates are determined in collaboration with the customer, ensuring a perfect fit for any application.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is your premier manufacturer and supplier for Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plates, committed to producing world-class high-performance titanium alloy plates. Enjoy expedited worldwide delivery on ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our inventory includes Grade 5 (UNS R56400) titanium plates with thicknesses from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold-rolled, those from 6.0mm to 50mm are hot-rolled, and plates over 50mm are forged. Grade 5 titanium, known as Ti-6Al-4V, is the 'workhorse' of titanium alloys, offering exceptional strength, ductility, and resistance to corrosion and high temperatures, making it indispensable for both general and military industries. Our products comply with all major standards, including ASTM, ASME, AMS, GB, GJB, MIL, JIS, and EN.
The Ti-6Al-4V Grade 5 titanium plate by DAXUN is engineered for excellence and predominantly used in aerospace, military, power sectors, vehicle armor, precision rocket guidance components, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global powerhouse in producing and supplying top-tier Grade 1 titanium plates, setting the standard for quality and reliability.
The pure Grade 1 titanium plate by DAXUN is renowned for its superior ductility and cold formability, making it the material of choice for deep drawing applications. Grade 1 titanium is celebrated for its outstanding resistance to general and seawater corrosion, as well as its durability against oxidizing, neutral, and mildly reducing media, including chlorides. With its low density (about half that of nickel-based alloys), exceptional strength-to-weight ratio, and corrosion resistance, Grade 1 titanium excels in various challenging chemical environments. It boasts excellent cold formability, top-notch weldability, and good impact hardness, making it the softest and most ductile among commercially pure titanium grades.
As a premier producer of ASTM B265 Titanium Gr 1 Plates, DAXUN offers a comprehensive range of products including Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. We are your trusted manufacturers and suppliers of Pure Titanium Gr 1 Sheets and Plates in China.
Grade 2
At DAXUN, we produce and stock commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Recognized as the 'workhorse' of commercially pure titanium, Grade 2 offers an optimal blend of strength, ductility, and superb corrosion resistance, making it ideal for a multitude of industrial applications.
The Grade 2 Titanium Plate from DAXUN is a commercially pure titanium offering an excellent balance of strength and ductility. It's prized for its good impact strength, ease of weldability, and superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it provides excellent resistance to seawater and salt solutions.
Due to its low density, high strength-to-weight ratio, and excellent corrosion resistance, titanium from DAXUN is the material of choice for a wide array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is ideally suited for most industrial applications requiring superior ductility and corrosion resistance.
DAXUN is a titan in the field of metalworking, expertly handling both small and large titanium plate projects. We are your reliable reference and long-term partner, ready to supply you with top-quality titanium plates and provide comprehensive technical support. Consider DAXUN not just as your supplier but as a strategic partner dedicated to helping you overcome any challenges and meet your project goals.
At DAXUN's premier service center in China, we maintain an extensive inventory of titanium plate products, ensuring rapid order processing to meet your urgent needs. Leveraging advanced techniques such as basic processing, precision water jet cutting, and efficient plate nesting, our offerings deliver unparalleled value, significantly reducing your operational time and costs.
With relentless investment in state-of-the-art production facilities and strategic capacity agreements with our esteemed partners, DAXUN consistently leads the market in titanium plate quality. Our commitment to excellence guarantees that we remain at the pinnacle of innovation and quality, today and in the future.
Reach out to DAXUN today to discover the most competitive prices and obtain detailed technical information about our titanium plates. Let us help you find the perfect solution tailored to your specific requirements.
Q1: What products can you offer?
A: We provide a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316.
Additionally, we offer 400 series and duplex stainless steels such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can customize products according to your specific drawings to ensure your utmost satisfaction.
Q3. How does your factory ensure quality control?
Quality is our top priority. We consistently emphasize quality control from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation methods based on your request.
Please note, however, that any additional costs incurred will be borne by you.
Q5. How does your factory ensure quality control?
Quality is our top priority. We consistently emphasize quality control from start to finish.
Q6. How long is the delivery time?
A: The delivery time is typically 7-20 working days after payment confirmation.
For urgent orders, we expedite the process to ensure timely delivery.
Q7. What are your payment terms?
A: 100% T/T in advance, or Western Union for small orders.
B: 30% T/T upfront, with the remaining 70% before shipment.
C: 100% Irrevocable LC at sight, applicable for large orders.
Q8: Can you produce DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Inform us of your specific usage, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and others.
Q11: How can I visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}