| Customization: | Available |
|---|---|
| Type: | Stainless Steel Bars |
| Standard: | ASTM, AISI, GB, JIS, DIN, EN |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameters: Stainless Steel rod | |
| Material | 17-4PH 630 Precipitation Hardened Steel Bars |
| Specifications | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm - 57mm (11/16″ to 2-3/4″) |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| Marking & Traceability | Each Stainless Steel rod is traceable to its producing mill and heat by an identification number etched within 24″ (610mm) of one end. |
| Test Certificate | Manufacturer Test Certificate according to EN 10204 3.1 B |
| Laboratory Test Certificate from Govt. Approved Lab. | |
| Under Third Party Inspection | |
| Testing & Inspection | Visual inspection • Surface roughness measurement • Helium-leak testing • Scanning Electron Microscopy (SEM) • Auger Electron Microscopy (AES) • Election Spectroscopy for Chemical Analysis (ESCA or XPS) • Particle testing • Moisture testing |
Daxun is a premier global manufacturer of SS 17-4PH/630 Round Bar/Rod range. We proudly serve as a supplier, exporter, and reputable distributor of top-tier quality bars and rods, ensuring excellence in every piece.
We offer an extensive variety of bars and rods tailored to meet your specific needs. This includes options in surface treatment, end finish, dimensions, shapes, and sizes.
SS 17-4PH is a high-performance martensitic stainless steel, hardened through precipitation. This alloy is enriched with nickel, copper, and chromium, making it a critical material for the aerospace sector, particularly for fasteners and structural components. UNS S17400's microstructure, refined during the remelting process, enhances the alloy's toughness and durability.
Stainless steel 17-4 PH Round Bar stands out in manufacturing and engineering due to its remarkable corrosion resistance, impressive strength, and ease of production. The 'PH' in 17-4 PH denotes 'precipitation hardening,' a heat treatment that significantly enhances its mechanical properties.
For further inquiries on our stainless steel rods, please contact Daxun
17-4PH Stainless Steel Rod chemical composition
| Carbon | 0.07% (Max) |
| Silicon | 1.00% (Max) |
| Manganese | 1.00% (Max) |
| Phosphorous | 0.040% (Max) |
| Sulfur | 0.030% (Max) |
| Chromium | 15%-17.5% |
| Molybdenum | 0.50% (Max) |
| Nickel | 3%-5% |
| Copper | 3%-5% |
| Material Type | Condition | Ultimate Tensile Strength (PSI) | 0.2% Yield Strength (PSI) | Elongation (% In 2in.) | Reduction Of Area (%) | Hardness Brinell | Hardness Rockwell |
| 17-4 PH | H900 | 190,000 | 170,000 | 10 | 40 | 388 | C40 |
| H1025 | 155,000 | 145,000 | 12 | 45 | 331 | C35 | |
| H1075 | 145,000 | 125,000 | 13 | 45 | 311 | C32 | |
| H1150 | 135,000 | 105,000 | 16 | 50 | 277 | C28 | |
| H1150-M | 115,000 | 75,000 | 18 | 55 | 255 | C24 | |
| H1150-D | 125,000 | 105,000 | 16 | 50 | 255 min - 311 max | C24 - 33 |
| Heat Treated Condition | H900 |
| Density, lbs/in3 | 0.282 |
| Electrical Resistivity, microhm-cm | 77 |
| Specific Heat, BTU/lb/°F (32-212°F) | 0.1 |
| Thermal Conductivity, BTU/hr/ft2/in/°F | |
| 300°F | 124 |
| 500°F | 135 |
| 860°F | 156 |
| 900°F | 157 |
| Mean Coefficient of Thermal Expansion, in/in/°F | |
| -100 to 70°F | 5.8 x 10^-6 |
| 70 - 200°F | 6.0 x 10^-6 |
| 70 - 400°F | 6.0 x 10^-6 |
| 70 - 600°F | 6.3 x 10^-6 |
| 70 - 800°F | 6.5 x 10^-6 |
| 70 - 900°F | - |
| Modulus of Elasticity, ksi | 28.5 x 10^3 |
| Modulus of Rigidity, ksi | 11.2 x 10^3 |
| Poisson's Ratio (all conditions) | 0.272 |
Our forming capabilities include advanced radial forging machines, state-of-the-art heat treatment furnaces, cutting-edge melting furnaces, and precision rolling mills for manufacturing titanium rods. Additionally, we utilize a unique hydroforming process for producing high-quality parts.
Our stainless steel rods undergo meticulous heat treatment in state-of-the-art furnaces, ensuring unparalleled material stability and superior high-performance characteristics.
At Daxun Stainless Steel, we employ the industry's leading vacuum induction furnace, vacuum consumable furnace, and electroslag furnace. This cutting-edge technology meticulously minimizes impurities during smelting, significantly enhancing the performance of our premium stainless steel rods.
Our stainless steel products are meticulously certified and fully traceable. We deliver top-tier stainless steel to premier industries such as aerospace, industrial, medical, marine, and military sectors.
| Tensile Strength | Yield Strength | |||||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Hardness | Modulus of Elasticity (x106 psi) |
| 304 | S30400 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304L | S30403 | A270 A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | - | 90 Rb | 28 |
| 304LN | S30453 | A249, A688 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | - | 90 Rb | 28 |
| 304H | A30409 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | 7 or coarser | 90 Rb | 28 |
| The Mechanical Properties of grade 316L Stainless Steel are displayed in the following table. | |||||
| Grade | Tensile Str | Yield Str | Elong | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell B (HR B) max | Brinell (HB) max | |||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
| Tensile Strength | Yield Strength | ||||||||
| Alloy | UNS Designation | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % |
| 321 | S32100 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| 321H | S32109 | - | 75,000 | 515 | - | 30,000 | 205 | - | 35 |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 310S | 7.9 g/cm3 | 1402 °C (2555 °F) | Psi - 75000 , MPa - 515 | Psi - 30000 , MPa - 205 | 40% |
| Grade | Tensile Strength | Yield Strength | Elongation | Hardness | |
| (MPa) min | 0.2% Proof | (% in 50mm) min | |||
| (MPa) min | Rockwell C (HR C) | Brinell (HB) | |||
| UNS S31803 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| UNS S32205 / 2205 | 621 | 448 | 25 | 31 max | 293 max |
| Grade | Property | Value |
| 2507/ S32750 |
Density (g/cm3) | 7.8 |
| 0.2% Offset Yield Strength | 80 ksi | |
| Ultimate Tensile Strength | 116 ksi | |
| 0.1% Offset Yield Strength 0.2% | 91 ksi | |
| Elongation in 2 inches, % | 15% | |
| Hardness Rockwell C | 32 | |
| Impact Energy | 74 ft.-lbs | |
| Density | 0.28 lb per inch3 | |
| Modulus of elasticity | 28 x 10(6) psi | |
| Coefficient of thermal expansion | 7.2 x 10(-6) per of at 68 to 212 of | |
| Thermal conductivity | 8.7 Btu/hr ftoF | |
| Heat capacity | 0.12 Btu/ lb oF | |
| Electrical resistivity | 31.5 x10(-6) ohm-inch |
Widely used in construction to automotive sectors, our 17-4ph Stainless Steel round bars cater to diverse applications. Jiangsu Daxun Alloy Co., Ltd. provides these in various grades and sizes. Our advanced cutting service ensures precise fulfillment of your requirements every time.
Q: Can you manufacture SS grinding bars & rods?
A: Absolutely, we specialize in producing SS grinding bars & rods that boast impeccable precision in dimension, roundness, and straightness-surpassing the quality of standard polished bars. However, please note that this superior craftsmanship comes at a higher processing cost.
Q1: What products do you offer?
A: We offer an extensive range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316.
We also provide 400 series and duplex stainless steel like 2205, 2304, 2101, 2507, along with high-nickel alloys such as 904L, 800H, and 600H.
Q2: Can you manufacture products according to my drawings?
A: Yes, we can create custom products based on your drawings to ensure your utmost satisfaction.
Q3: How does your factory handle quality control?
A: Quality is our top priority. We implement stringent quality control measures from the start of production to the final product to ensure excellence.
Q4: Can I request changes to packaging and transportation?
A: Yes, we can accommodate changes to packaging and transportation as per your request.
However, please be aware that any additional costs incurred during this process will be your responsibility.
Q5: How does your factory ensure quality control?
A: Quality is paramount to us. We maintain rigorous quality control procedures from the beginning to the end of production.
Q6: What is your typical delivery time?
A: Our standard delivery time ranges from 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite production to meet your deadlines.
Q7: What are your payment terms?
A: We offer the following payment options: 100% T/T in advance, Western Union for small orders.
B: 30% T/T in advance and the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you produce Deep Drawing Quality (DDQ) material?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Share your requirements, and we will adjust the mechanical properties accordingly.
Q9: How can I obtain a sample?
A: We provide FREE samples for your review and testing. For small sample pieces, we may cover the courier cost, subject to conditions.
Q10: Which countries have you exported to?
A: We have successfully exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
){kind=link}