| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN offers an extensive inventory of commercially pure titanium plates, including Gr1, Gr2, Gr3, and Gr4 (UNS), with thickness options ranging from 0.5 mm to 120 mm. These titanium plates are the true "workhorses" within the commercially pure titanium family, boasting a remarkable combination of high strength, ductility, and outstanding corrosion resistance, ideal for a plethora of industrial applications.
Our Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their exceptional balance of strength and ductility. They exhibit impressive impact strength and welding ease. These plates offer superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing conditions, and wet ***. Additionally, they are highly resistant to seawater and salt solutions.
The Gr5 Ti-6Al-4V titanium plate is a titanium alloy plate comprising 90% titanium, 6% aluminum, and 4% vanadium, categorized as an α-β type titanium alloy. Aluminum stabilizes the α phase, while vanadium stabilizes the β phase. This alloy is celebrated for its outstanding comprehensive and process performance. TC4 titanium alloy provides excellent strength at room and elevated temperatures, remarkable creep resistance, thermal stability, high fatigue performance, and *** growth resistance in seawater. It also offers satisfactory fracture toughness and resistance to hot salt stress corrosion. Gr5 Ti-6Al-4V titanium alloy plates exhibit excellent process plasticity and superplasticity, making them suitable for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This premium plate is meticulously produced through precise plate rolling, with the final rolling step being cold rolling. Supplied in either work-hardened or heat-treated condition, these sheets cater to a variety of customer requirements. Further processing can be customized to include mechanical or chemical treatments, ensuring unparalleled versatility. 2. Hot-Rolled Titanium Plate: Crafted through meticulous longitudinal and transverse rolling, these plates vary in thickness from 3.0mm to 155mm and are supplied in a heat-treated state. When needed, creep flattening is employed as an additional heat treatment to eliminate internal stress and achieve specific flatness requirements. Available in cut blanks or complex shaped parts, tailored further to meet precise customer specifications.3. Forged Titanium Plate: Manufactured by forging steel ingots on a vertical hydraulic press followed by rolling, or through open die forging and subsequent rolling. Standard slab dimensions reach up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length. Dimensions and weight of the forged plates are customized through agreement between the manufacturer and the customer, guaranteeing precision and quality.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier from China, specializing in Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates. Aiming to create the world's top high-performance titanium alloy plates, we deliver swiftly worldwide - ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN stocks and produces Grade 5 alloy titanium plates (UNS R56400) with thicknesses from 0.5mm to 300mm (0.5mm-6.0mm cold rolled, 6.0-50mm hot rolled, and over 50mm forged). Grade 5 titanium (Ti-6Al-4V) is the quintessential titanium alloy, merging high strength, ductility, and exceptional corrosion and high-temperature resistance, making it a favorite for both general and military industries. Compliant with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V grade 5 titanium plate is predominantly utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and marine applications.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Our Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it ideal for deep drawing processes. Known for its superior general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media, including chlorides. Its low density (approximately half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it a prime choice for varied harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering good cold formability, excellent corrosion resistance, superb weldability, and notable impact hardness.
We are leading ASTM B265 Titanium Gr 1 Plate Producers, offering Titanium Gr 1 Sheets, Finished Plates, Grade 1 Coils, Pure Titanium Hot Rolled Plates, Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Patterned Plates, Perforated Plates, and more. As top manufacturers in China, we ensure high-quality production.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. The Grade 2 Titanium Plate (UNS R50400) is the primary choice in the commercially pure titanium family, offering a blend of high strength, ductility, and excellent corrosion resistance suitable for many industrial applications.
Grade 2 Titanium Plate represents a commercially pure titanium plate that perfectly balances strength and ductility. It features good impact strength, easy weldability, and significant corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, mildly reducing environments, and wet ***. It also excels in seawater and salt solutions.
With a melting point of 1660°C, Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal material for a plethora of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring excellent ductility and corrosion resistance.
DAXUN is your go-to metal expert for both small and large titanium plate projects. As your strategic partner and reference point, we provide not only titanium plates but also technical assistance to help you achieve your project goals. Consider DAXUN your trusted partner for all your industrial pure titanium and titanium alloy plate needs, ready to meet any challenges and requirements for your success.
At Jiangsu Daxun Alloy Co., Ltd., our dedicated service center in China stocks a wide range of titanium plate products, ensuring prompt order processing. We offer an array of value-added services, including basic processing, precision water jet cutting, and efficient plate nesting. These solutions are designed to provide our customers with significant time and cost savings.
Jiangsu Daxun Alloy Co., Ltd. is committed to maintaining our position as a leader in titanium plate quality. Our continual investment in advanced production facilities and strategic capacity agreements with our trusted partners guarantee that we remain at the cutting edge of the industry, both now and in the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today for the most competitive titanium plate prices and comprehensive technical information. Our expert team is ready to assist you with all your titanium alloy needs.
Q1: What products can you offer?
A: We offer a comprehensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and 300 series.
Additionally, we provide 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products exactly as per your drawings to ensure your utmost satisfaction.
Q3. How does your factory handle quality control?
Quality is our top priority. We rigorously control quality from start to finish to ensure premium products.
Q4. Can I request a change in the form of packaging and transportation?
Yes, we can modify the packaging and transportation form according to your request.
However, you will need to cover any additional costs and differences that occur during this period.
Q5. How does your factory handle quality control?
Quality is our top priority. We rigorously control quality from start to finish to ensure premium products.
Q6. How long is the delivery time?
A: Delivery time is typically 7~20 working days after payment confirmation.
For urgent orders, we can expedite the process to meet your deadlines.
Q7. What are your payment terms?
A: 100% T/T in advance, Western Union (for small orders)
B: 30% T/T upfront and 70% balance before shipment
C: 100% Irrevocable LC at sight (for large orders)
Q8: Can you produce Deep Drawing Quality (DDQ) materials?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Let us know your requirements, and we will tailor the mechanical properties accordingly.
Q9: How can I get a sample?
A: FREE samples are available for inspection and testing. For small pieces, we may cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: We have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Take a flight to Guangzhou Baiyun International Airport, and we will pick you up.
){kind=link}