| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
At Daxun, we produce and stock a comprehensive range of commercially pure titanium plates-Gr1, Gr2, Gr3, and Gr4 (UNS)-with thicknesses spanning from 0.5 mm to 120 mm. These grades serve as the backbone of the commercially pure titanium family, offering a harmonious blend of high strength, ductility, and exceptional corrosion resistance, making them indispensable across various industrial applications.
The Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their commercially pure composition, striking an optimal balance between strength and ductility. These plates exhibit excellent impact strength and weldability, alongside superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Their remarkable resilience extends to seawater and salt solutions as well.
The Gr5 grade5 Ti6al4v titanium plate is a titanium alloy renowned for its superior attributes. Comprising 90% titanium, 6% aluminum, and 4% vanadium, this α-β type titanium alloy benefits from aluminum's α phase stabilization and vanadium's β phase stabilization. Gr5 Ti-6Al-4V titanium alloy plates are celebrated for their excellent comprehensive performance and process capabilities. TC4 titanium alloy stands out with its remarkable room and high-temperature strength, impressive creep resistance, thermal stability, high fatigue performance, *** growth resistance in seawater, and commendable fracture toughness and hot salt stress corrosion resistance. Additionally, these plates exhibit outstanding process plasticity and superplasticity, making them versatile for various processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Our cold-rolled titanium plates are meticulously crafted through a stringent plate rolling process, with the final rolling phase being cold rolling. These sheets are available in either a work-hardened or heat-treated condition. Depending on your specific needs, we offer additional processing which can be mechanical or chemical in nature. 2. Hot-Rolled Titanium Plate: Produced via longitudinal rolling or a combination of longitudinal and transverse rolling, our hot-rolled titanium plates boast a thickness range from 3.0mm to 155mm. They are delivered heat-treated, and can undergo creep flattening to eradicate internal stresses and achieve specific flatness standards. We can supply these sheets as cut blanks, meaning intricate parts can be precisely cut from the parent metal, with further customization available as per your requirements.3. Forged Titanium Plate: Forged titanium plates are produced by forging steel ingots on a vertical hydraulic press, followed by rolling, or employing open die forging techniques. The standard slab dimensions can reach up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length. The exact dimensions and weights of the forged plates are meticulously coordinated between us and our esteemed clients.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is your premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier, headquartered in China! Our mission is to deliver the world's highest-performing titanium alloy plates. We ensure rapid global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. At DAXUN, we produce and stock alloy titanium plates Grade 5 (UNS R56400) in varying thicknesses from 0.5mm to 300mm. The 0.5mm-6.0mm range is cold rolled, 6.0-50mm is hot rolled, and plates above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is renowned as the 'workhorse' of titanium alloys, offering high strength, ductility, and outstanding corrosion resistance and high-temperature stability. Preferred across general and military industries, our products conform to rigorous standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
The Ti-6Al-4V Grade 5 titanium plate is primarily utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance components, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of top-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it ideal for deep drawing processes. Known for its superior general and seawater corrosion resistance, Grade 1 titanium effectively withstands oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density-approximately half that of nickel-based alloys-combined with a high strength-to-weight ratio and robust corrosion resistance, makes it an ideal choice for challenging chemical environments. Commercially pure Grade 1 titanium is the most ductile and softest of the grades, offering outstanding cold formability, excellent corrosion resistance, superior weldability, and good impact hardness.
DAXUN excels in producing ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. We are a trusted supplier of Titanium Grade 1 Coil, Hot Rolled Plates, Cold Rolled Plates, ASTM B265 Gr 1 Sheets, Patterned Plates, Perforated Plates, and more. As leading manufacturers in China, our Titanium Gr 1 products meet the highest industry standards.
Grade 2
DAXUN produces and stocks commercially pure Titanium Plates Grade 2 (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is recognized as the 'workhorse' of the commercially pure titanium family, combining high strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium offering, strikes an ideal balance between strength and ductility. It features good impact strength, is easily weldable, and exhibits commendable corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it demonstrates superb resistance to seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make Grade 2 Titanium Plate an optimal material for a multitude of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a high melting point of 1660°C, Grade 2 Titanium Plate is the preferred choice for industrial applications demanding good ductility and corrosion resistance.
DAXUN is your trusted metal expert, adept at managing both small and large titanium plate projects. Consider DAXUN as your dependable partner, ready to supply titanium plates and offer any technical assistance required. Beyond being a supplier of industrial pure titanium and titanium alloy plates, DAXUN serves as your strategic ally, helping you navigate challenges and achieve your project goals with precision and excellence.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, ensuring rapid order processing to meet your urgent needs. Leveraging our expertise in basic processing, precision water jet cutting, and intricate plate nesting, we deliver exceptional value-added services. These not only enhance your operational efficiency but also result in significant time and cost savings for your business.
DAXUN's unwavering commitment to excellence is showcased through our continuous investment in state-of-the-art production facilities. Our strategic capacity agreements with trusted partners further cement our position as leaders in titanium plate quality, promising unparalleled standards both now and into the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information. Experience the DAXUN advantage and elevate your projects with our premium solutions.
Q1: What products can you offer?
A: We offer a broad range of high-quality steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, and 316.
We also specialize in 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, as well as high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products precisely according to your drawings, ensuring utmost satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We maintain stringent quality control measures from start to finish.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can adapt the packaging and transportation forms to your specific requests,
but you will need to cover any additional costs incurred during this period.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We maintain stringent quality control measures from start to finish.
Q6. How long is the delivery time?
A: Delivery typically takes 7~20 working days after payment confirmation.
For urgent orders, we expedite the process to meet your deadlines.
Q7. What is your Payment?
A: 100% T/T in advance or Western Union for small orders.
B: 30% T/T upfront and 70% balance before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you make DDQ (Deep Drawing Quality)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, etc. Share your specific use, and we'll fine-tune the mechanical properties to meet your needs.
Q9: How to get a sample?
A: FREE samples are available for your evaluation. For small pieces, we may cover the courier cost, depending on the request.
Q10: Which countries have you exported to?
A: We have proudly exported our stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How to visit your company?
A: Fly to Guangzhou Baiyun International Airport, and we'll arrange to pick you up.
){kind=link}