| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
At DAXUN, we specialize in producing and stocking commercially pure titanium plates including Gr1, Gr2, Gr3, and Gr4 (UNS). These plates, ranging in thickness from 0.5 mm to 120 mm, are the backbone of the commercially pure titanium family. They offer an ideal combination of high strength, ductility, and superior corrosion resistance for a variety of industrial applications.
The Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their excellent balance of strength and ductility. With robust impact strength and ease of welding, they excel in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Moreover, they demonstrate outstanding resistance to seawater and salt solutions.
The Gr5 grade5 Ti6Al4V titanium plate stands out as a titanium alloy plate containing 90% titanium, 6% aluminum, and 4% vanadium, classified as an α-β type titanium alloy. Aluminum stabilizes the α phase while vanadium stabilizes the β phase. This Gr5 Ti-6Al-4V titanium alloy plate boasts exceptional comprehensive performance, excellent room and high-temperature strength, superb creep resistance, thermal stability, high fatigue performance, *** growth resistance in seawater, and satisfactory fracture toughness and hot salt stress corrosion performance. Its impressive process plasticity and superplasticity make it suitable for diverse processing, welding, and machining methods.
Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Chemical Composition of Grade 2 Titanium Sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Mechanical Properties of Grade 2 Titanium Sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This plate is meticulously crafted through a specialized plate rolling process, with the pivotal final step being cold rolling. Available in work-hardened or heat-treated conditions, each sheet can be tailored via mechanical or chemical processing according to your unique requirements. 2. Hot-Rolled Titanium Plate: Produced through both longitudinal rolling and a combination of longitudinal and transverse rolling, these plates come in thicknesses ranging from 3.0mm to 155mm, furnished in a heat-treated condition. For precise flatness and stress elimination, creep flattening can be applied. Whether you need cut blanks or complex shapes, our hot-rolled plates are engineered to meet your exact specifications.3. Forged Titanium Plate: Forged with precision on vertical hydraulic presses, our plates also undergo rolling, open die forging, or a combination of these processes for optimal results. Standard slab dimensions reach up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length. Dimensions and weights are customizable to meet exact customer specifications.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a renowned manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China! Our mission is to create the world's highest-performing titanium alloy plates, with rapid worldwide delivery - ASTM B265 Grade 2, Grade 5 Titanium Plates. DAXUN offers a comprehensive range of alloy titanium plates Grade 5 (UNS R56400) with thicknesses from 0.5mm to 300mm. Thicknesses from 0.5mm to 6.0mm are cold rolled, 6.0mm to 50mm are hot rolled, and 50mm and above are forged. Grade 5 titanium plate (Ti-6Al-4V) is prized for its high strength, ductility, excellent corrosion resistance, and high temperature tolerance, making it a favorite in both general and military industries. Compliance with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is predominantly used in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, marine industry, and more.
Grade 1
DAXUN Alloys is a premier global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate excels in ductility and cold formability, making it perfect for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, as well as its resistance to oxidizing, neutral, and mildly reducing media, including chlorides. Titanium's low density (about half that of nickel-based alloys), combined with a high strength-to-weight ratio and excellent corrosion resistance, makes it an exceptional choice for harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, featuring superb cold formability, corrosion resistance, weldability, and impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, Perforated Plates, and more. Leading manufacturers in China for Titanium ASTM B265 Gr 1 Sheets and Plates.
Grade 2
DAXUN offers and maintains stocks of commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. As the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) combines high strength, ductility, and remarkable corrosion resistance, making it suitable for a wide range of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that strikes an excellent balance between strength and ductility. It features good impact strength, is highly weldable, and offers superb corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it boasts excellent seawater and salt solution resistance.
With its low density, high strength-to-weight ratio, and corrosion resistance, titanium is ideal for numerous applications. Grade 2 Titanium Plate effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. Its melting point of 1660°C makes it the preferred alloy for most industrial applications requiring robust ductility and corrosion resistance.
DAXUN is a titanium industry expert, specializing in both small and large titanium plate projects. DAXUN is your reliable reference point and long-term partner, ready to deliver titanium plates and provide any technical assistance necessary. More than just a supplier of industrial pure titanium and titanium alloy plates, DAXUN serves as a strategic partner, helping you overcome challenges and meet your project goals with excellence.
At DAXUN's premier service center in China, we maintain a robust inventory of titanium plate products, ensuring swift order processing to meet your urgent needs. Our comprehensive value-added services, including basic processing, precision water jet cutting, and efficient plate nesting, are designed to enhance customer satisfaction by significantly saving both time and costs.
DAXUN's unwavering commitment to excellence is reflected in our continuous investments in state-of-the-art production facilities. Strategic capacity agreements with our esteemed partners solidify DAXUN's position as a leader in the quality titanium plate industry, both now and in the years to come.
Reach out to DAXUN today to access the most competitive prices and up-to-date technical information on our premium titanium plates. We are dedicated to providing you with the finest materials and support.
Q1: What products can you offer?
A: We proudly offer a comprehensive range of steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L, as well as 300 and 400 series. Additionally, we provide duplex stainless steel such as 2205, 2304, 2101, and 2507, and high-nickel alloys like 904L, 800H, and 600H.
400 series, and duplex stainless steel like 2205, 2304, 2101, 2507, etc. We also offer high-nickel alloys including 904L, 800H, and 600H.
Q2: Can you produce the products according to my own drawings?
A: Yes, we can produce the products precisely according to your drawings to ensure your complete satisfaction.
Q3: How does your factory manage quality control?
A: Quality is our top priority. We meticulously manage quality control from the very beginning to the final product to ensure exceptional standards.
Q4: Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation forms to meet your requests,
though you will need to cover any additional costs and potential price differences.
Q5: How does your factory manage quality control?
A: Quality is our top priority. We meticulously manage quality control from the very beginning to the final product to ensure exceptional standards.
Q6: How long is the delivery time?
A: Standard delivery time is 7 to 20 working days after payment confirmation. In urgent cases, we can expedite production.
If the order is urgent, we will push our workshop to finish in advance.
Q7: What are your payment terms?
A: 100% T/T in advance, or Western Union for smaller orders.
B: 30% T/T in advance with the remaining 70% due before shipment.
C: For larger orders, a 100% Irrevocable LC at sight is accepted.
Q8: Can you provide Deep Drawing Quality (DDQ) materials?
A: Absolutely! Our materials are suitable for stainless steel pots, sinks, bowls, and more. Simply inform us of your specific applications, and we will tailor our materials to meet your mechanical property requirements.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation and testing. For small sample pieces, we may cover the courier costs depending on the situation.
Q10: To which countries have you exported your products?
A: We have proudly exported our stainless steel materials to numerous countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: You can fly into Guangzhou Baiyun International Airport, where we will be happy to pick you up and bring you to our facilities.
){kind=link}