6-4 Titanium Alloy Tube 6al4V Titanium Seamless Tube Low Price ASME Sb-338 Lightweight Forged Ti6al4V Titanium Tube

• Type: Titanium Pipes
• Application: Industrial, Medical
• Technique: Hot Rolled
• Grade: Gr5 Grade5 6-4 Ti6al4V
• Shape: Round
• Standards: Astmb861 B862 B338 ASME Sb861 Sb862 Sb338
• Titanium Plate Grade: Grade 5 Uns R50600
• Transport Package: Wooden Box
• Specification: φ 6.35mm-φ 1219mm
• Trademark: Daxun
• Origin: China
• Production Capacity: 1000ton

Product Description

Product Parameters

 

Ti-6Al-4V Grade 5 Titanium pipe & Tubes Specification	ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862
Grade 5 Titanium pipe & Tubes Grades	Commercially pure titanium Grade 5-Ti-6Al4V- TC4- USN 56400
Grade 5 Titanium pipe & Tubes Type	ot Rolled / Cold Drawn / Welded / ERW
Grade 5 Titanium pipe & Tubes Outer Diameter Size	Titanium seamless pipe - φ1.0mm to φ508.3mm
	Titanium welded pipe - φ6.0mm to φ1219mm
Grade 5 Titanium pipe & Tubes Wall Thickness	1.0mm-50mm (customizable wall thickness)
Grade 5 Titanium pipe & Tubes Length	5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
Titanium pipe Form Ti-6Al-4V	' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc
Marking  TC4 1.37165	All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.)
Uses of Titanium Alloy Tubes	Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes.
Grade 5 Titanium pipe & Tubes Pipe Ends	Plain Ends / Beveled Ends
Grade 5 Titanium pipe & Tubes Delivery Conditions	As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
Grade 5 Titanium pipe & Tubes Coating	Electropolish, Mechanical Polish, Satin Finish, Passivated
Grade 5 Titanium pipe & Tubes Other Testing	ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc.
Grade 5 Titanium pipe & Tubes Dimension	All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME
Grade 5 Titanium pipe & Tubes Value Added Services	Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Grade 5 Titanium pipe & Tubes Packaging	Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Grade 5 Titanium pipe & Tubes Shipment & Transportation	By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Grade 5 Titanium pipe & Tubes Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

 

Detailed Photos

Applications and Standards

Grade 5 Titanium Tubes: Versatile Uses in Extreme Corrosive Conditions

• Widely utilized in industries such as chemical processing, military, aerospace, chemical energy, marine engineering, oil and gas, rockets and missiles, military armor, ships, industrial machinery, power, paper and pulp, pharmaceutical, and food processing.
• Specifications: ASTM B861, B862, B338 / ASME SB861, SB862, SB338
• Standards: ASTM, GB, GJB, ASME, API

 

Quality, Delivery, Inspection

Daxun ensures superior quality through rigorous tests including flattening, flaring, ultrasonic flaw detection, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These tests certify the suitability of our Grade 1 Titanium Welded and Seamless Pipes for their intended applications. We precisely measure diameter, thickness, and surface during production. Our standard delivery time is 5-7 days, while special sizes take 15-20 days.

• Strict Adherence to Contractual Delivery Times
• Support for Third-Party Factory Inspections
• Free Samples Available for Customer Testing
• On-site or Video Factory Inspections Supported

 

Grade 5 Titanium Tube Features

Ti-6Al4V Grade 5 Titanium Alloy Tube is the industry standard for high strength and toughness, offering excellent welding and processing characteristics.

• High Strength Titanium Alloy
• Heat Treatable
• Good Ductility
• Good Machinability
• Superior Weldability

We stock and sell Grade 5 Titanium Alloy Seamless, Forged Seamless, and Welded Tubes.

 

As a premier titanium alloy tube manufacturer, Daxun Alloy supplies top-grade Grade 5 titanium pipes, renowned in global projects for their quality.

Ti 6Al-4V (Grade 5 Titanium) is the most popular titanium alloy, making up over 50% of all titanium usage. Typically annealed, it operates up to 400°C (750°F) and is welded with matching or ELI filler wire. It offers higher strength and better stiffness compared to commercial pure titanium, although its thermal conductivity is about 60% lower. Heat treatable, this alloy provides superior formability, low density, and exceptional corrosion resistance.

Grade 5 Titanium Tubes offer a perfect mix of strength, corrosion resistance, weldability, and machinability. Widely used in military aircraft, aviation industry, rocket parts, precision-guided components, armor parts, ship equipment, and military vacuum equipment. Ti 6Al-4V is also utilized in surgical implants and maintains ideal properties in temperatures ranging from -210°C to 400°C. This versatile alloy combines high strength and toughness with excellent welding and processing characteristics.

7e67206b

Packaging & Shipping

Company Profile

**Titanium Seamless Tubes** Discover the epitome of excellence with Daxun's Titanium Seamless Tubes. Engineered to perfection, these tubes are the cornerstone of durability and strength, specifically designed to meet the rigorous standards required by cutting-edge industries.
**Daxun produces:** 1. Hot-finished Titanium Tubes 2. Cold-finished Titanium Tubes 3. Titanium Welded Pipes
**Hot-finished Titanium Tubes** Our hot-finished titanium tubes are meticulously crafted to deliver top-notch performance across various demanding applications.
**Production Details** These tubes come in hot-rolled or hot-extruded forms, with precision straightened, machined diameters, and polished surfaces. Available in both heat-treated and non-heat-treated variants, every tube undergoes 100% ultrasonic flaw detection to ensure impeccable quality.
**Titanium Tube Materials Available:** At Daxun, we offer a comprehensive range of titanium tube materials tailored to suit diverse application needs.
**Specifications for Hot-rolled and Hot-extruded Titanium Tubes:** - **Hot-rolled Titanium Tubes:** - Outer Diameter: 19mm to 325mm - Wall Thickness: 9mm to 30mm - Length: Up to 5000mm (as per agreement with the customer) - **Hot-extruded Titanium Tubes:** - Outer Diameter: 50mm to 160mm - Wall Thickness: 7mm to 35mm - Length: Up to 3000mm (as per agreement with the customer)
**Cold-finished Titanium Tubes** Our cold-finished titanium tubes are produced with precision, ensuring superb quality for sophisticated applications.
**Production Details and Testing for Cold-finished Tubes:** Cold-finished tubes are available in heat-treated forms, with surface-etching, and undergo rigorous hydrostatic or ultrasonic testing as required. Specifications include: - **Cold-finished Tubes:** - Outer Diameter: 6mm to 89mm - Wall Thickness: 0.5mm to 11mm - Length: Up to 6000mm (as per agreement with the customer)

**Titanium Welded Pipes** Daxun's titanium welded pipes are the pinnacle of engineering excellence, made to withstand the toughest environments.
**Production and Specifications for Titanium Welded Pipes:** Manufactured with utmost precision, our titanium welded pipes range from 12.7mm to 38.1mm in diameter, with wall thickness from 0.4mm to 1.65mm, and lengths up to 25000mm. These pipes, available in Gr1, Gr2, and Gr12 titanium alloys, are produced through automatic tungsten inert gas welding and are thoroughly tested to meet ASTM B 338 and ASME SB 338 standards. They are custom-packed per customer specifications and undergo stringent mechanical, geometrical, ultrasonic, eddy current, pneumatic, and hydrostatic testing to guarantee superior quality.

CP GR1 Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.50 g/cc	0.163 lb/in³
a Lattice Constant	2.95 Å @Temperature 25.0 °C	2.95 Å @Temperature 77.0 °F	alpha phase
	3.29 Å @Temperature 900 °C	3.29 Å @Temperature 1650 °F	beta phase
c Lattice Constant	4.683 Å	4.683 Å @Temperature 77.0 °F	c/a = 1.587
Mechanical Properties	Metric	English	Comments
Hardness, Brinell	120	120	annealed
Hardness, Knoop	132	132	Estimated from Brinell.
Hardness, Rockwell B	70	70	annealed
Hardness, Vickers	122	122	Estimated from Brinell.
Tensile Strength	124 - 138 MPa @Temperature 427 °C	18000 - 20000 psi @Temperature 801 °F
	152 - 179 MPa @Temperature 316 °C	22000 - 26000 psi @Temperature 601 °F
	193 - 207 MPa @Temperature 204 °C	28000 - 30000 psi @Temperature 399 °F
Tensile Strength, Ultimate	240 MPa	34800 psi
Tensile Strength, Yield	170 - 310 MPa	24700 - 45000 psi
	76.0 - 90.0 MPa @Temperature 427 °C	11000 - 13100 psi @Temperature 801 °F	0.2% offset
	83.0 - 103 MPa @Temperature 316 °C	12000 - 14900 psi @Temperature 601 °F	0.2% offset
	110 - 124 MPa @Temperature 204 °C	16000 - 18000 psi @Temperature 399 °F	0.2% offset
Elongation at Break	24%	24%
	25 - 30 % @Temperature 427 °C	25 - 30 % @Temperature 801 °F
	30 - 35 % @Temperature 316 °C	30 - 35 % @Temperature 601 °F
	40 - 50 % @Temperature 204 °C	40 - 50 % @Temperature 399 °F
Reduction of Area	35%	35%
Tensile Modulus	103 GPa	14900 ksi
Compressive Modulus	110 GPa	16000 ksi
Poissons Ratio	0.37	0.37
Shear Modulus	45.0 GPa	6530 ksi
Charpy Impact	310 J	229 ft-lb	V-notch
Impact Test	136 J	100 ft-lb	Impact Strength
Coefficient of Friction, Dynamic	0.68	0.68	Ti sliding on Ti; 300 m/min
	0.8	0.8	Ti sliding on Ti; 40 m/min

 

CP GR2 Titanium tube PHYSICAL PROPERTIES
Density	Magnetic Permeability
0.163 lbs/in-3	Nonmagnetic
4.51 g/cm-3	Electrical Resistivity
Beta Transus (+/-25°F, +/--3.9°C)	21 µΩ/in
1680°F	0.53 µΩ/m
915°C	Elastic Modulus
Thermal Conductivity	15.2-17.4 Msi
12.60 BTU hr-1ft-1 °F-1	105-120 GPa
21.79 W m-1 °C-1	Typical values at room temperature of about 68-78°F (20-25°C)

 

GR5 TI6AL4V Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %
Modulus of Elasticity	113.8 GPa	16500 ksi
Compressive Yield Strength	970 MPa	141000 psi
Notched Tensile Strength	1450 MPa	210000 psi	Kt (stress concentration factor) = 6.7
Ultimate Bearing Strength	1860 MPa	270000 psi	e/D = 2
Bearing Yield Strength	1480 MPa	215000 psi	e/D = 2
Poisson's Ratio	0.342	0.342
Charpy Impact	17 J	12.5 ft-lb	V-notch
Fatigue Strength	240 MPa	34800 psi	at 1E+7 cycles. Kt (stress concentration factor) = 3.3
Fatigue Strength	510 MPa	74000 psi	Unnotched 10,000,000 Cycles
Fracture Toughness	75 MPa-m½	68.3 ksi-in½
Shear Modulus	44 GPa	6380 ksi
Shear Strength	550 MPa	79800 psi	Ultimate shear strength
Electrical Properties
Electrical Resistivity	0.000178 ohm-cm	0.000178 ohm-cm
Magnetic Permeability	1.00005	1.00005	at 1.6kA/m
Magnetic Susceptibility	3.30E-06	3.30E-06	cgs/g
Thermal Properties
CTE, linear 20°C	8.6 µm/m-°C	4.78 µin/in-°F	20-100ºC
CTE, linear 250°C	9.2 µm/m-°C	5.11 µin/in-°F	Average over the range 20-315ºC
CTE, linear 500°C	9.7 µm/m-°C	5.39 µin/in-°F	Average over the range 20-650ºC
Specific Heat Capacity	0.5263 J/g-°C	0.126 BTU/lb-°F
Thermal Conductivity	6.7 W/m-K	46.5 BTU-in/hr-ft²-°F
Melting Point	1604 - 1660 °C	2920 - 3020 °F
Solidus	1604 °C	2920 °F
Liquidus	1660 °C	3020 °F
Beta Transus	980 °C	1800 °F

 

Certifications

Ti-6Al-4V- Grade 5 Titanium Tube

• Titanium Alloy-(UNS R56400)

INTRODUCTION

• DAXUN Ti-6Al-4V, Grade 5 Alloy Tube (UNS R56400) is the most sought-after titanium alloy on the market. This duplex alpha+beta titanium alloy utilizes aluminum as an alpha stabilizer and vanadium as a beta stabilizer, offering exceptional strength even at cryogenic temperatures up to 800°F (427°C). ATI Ti-6Al-4V, Grade 5 alloy is employed across various applications including annealing, solution treatment, and aging. From compressor blades, discs, and rings for jet engines; to fuselage and space capsule components; pressure containers; *** cases; helicopter rotor hubs; fasteners, and essential forgings, this alloy boasts a remarkable strength-to-weight ratio.
• Initially, the alloy undergoes melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). The remelting process is conducted through one or two stages of vacuum arc steps.

SPECIFICATIONS

• ASTM B338 - Standard for heat treatable titanium tubes
• AMS 4928 - Forgings and forging stock (annealed)
• AMS 4965 - Forgings (solution treated and aged)
• AMS 4967 - Forgings (annealed, heat treatable)

PHYSICAL PROPERTIES

• Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
• Density: 0.160 lbs/cu. in.; 4.47 gm/cc
• Beta Transus Temperature: 1830°F (± 25°); 999°C (± 14°)

HEAT TREATMENT

• Annealing at 1,700-1,900°F (927 - 1,038°C) is performed to achieve high hardness, tensile and fatigue strength.
• DAXUN 6-4™, Grade 5 Alloy offers versatile heat treatment options.
• 1. Anneal: 1,275 -1,400°F; (691 - 760°C), ½ to 2 hours, air or furnace cool
• 2. Stress Relief Anneal: 1,000 -1,200°F; (538 - 649°C), 1 to 8 hours, air or furnace cool
• 3. Solution Heat Treatment: 1,675 -1,750°F; (913 - 954°C), 1 hour, water quench
• 4. Aging Treatment: 975 -1,025°F; (524 - 552°C), 4 to 8 hours - air cool
• In the solution treated and aged condition, the very best properties are achieved in small cross sections that are rapidly
  quenched. For larger section sizes and/or quench delays, properties may fall below optimal values.

HARDNESS

In the annealed condition, typical hardness falls between Rockwell C 30-34, reaching Rockwell C 35-39 in the solution and aged condition.

FORGEABILITY/ FORMABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy tubes are forged at 1,750°F (954°C), with an end forging temperature of 1,450°F (788°C). To achieve optimal results, a reduction of at least 35% is recommended.
• DAXUN Ti-6Al-4V, Grade 5 alloy presents challenges for forming at room temperature, even in its annealed state. However, rigorous forming operations, such as bending or stretching, can be efficiently conducted on annealed material at elevated temperatures up to 1,200°F (649°C) without compromising its mechanical properties. Creep forming is also an effective technique for hot sizing or forming, typically performed within the temperature range of 1,000 to 1,200°F (538 to 649°C).

MACHINABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy can be precisely machined utilizing methods commonly applied to austenitic stainless steels. This includes employing slow cutting speeds, heavy feed rates, and maintaining rigid tooling.
  tooling, coupled with generous applications of non-chlorinated cutting fluids.

WELDABILITY

• The DAXUN Ti-6Al-4V Grade 5 Alloy Titanium Tube excels in weldability, whether in the annealed condition or with solution and partial aging treatments. The aging process is typically carried out post-weld heat treatment.
• Critical precautions are necessary to prevent contamination by oxygen, nitrogen, and hydrogen. Fusion welding is most effectively performed in an inert gas-filled chamber or with an inert gas tail shield to protect the molten metal and surrounding hot zone. Techniques such as spot welding, seam welding, and flash welding can be executed without requiring a protective environment.

SPECIAL PRECAUTIONS

• DAXUN Ti-6Al-4V, Grade 5 alloy is susceptible to contamination by hydrogen due to improper pickling processes, and it may absorb oxygen, nitrogen, and carbon during forging, heat treatment, and brazing. Such contamination can significantly diminish ductility, affecting notch sensitivity and forming capabilities.

Ti-6Al-4V Titanium Pipe - Grade 5 Titanium Tube

Titanium Alloy - (UNS R56400)
Introduction
DAXUN Ti-6Al-4V Titanium Tube, Grade 5 (UNS R56400) is the leading choice among titanium alloys. This duplex alpha+beta titanium alloy leverages aluminum as the alpha stabilizer and vanadium as the beta stabilizer. Renowned for its high strength, this alloy performs exceptionally at low temperatures around 800°F (427°C). It is ideal for processes such as annealing, solution treating, and aging. This versatile alloy is employed in a wide range of applications, including compressor blades, disks, and rings for jet engines; fuselage and space capsule components; pressure vessels; *** cases; helicopter rotor hubs; fasteners; and critical forgings requiring an excellent strength-to-weight ratio.
The alloy is initially melted through advanced techniques like vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). Subsequent remelting is performed in one or two vacuum arc stages.
Specifications
• ASTE B338 - Standard Heat Treatable Titanium Tube
• AMS 4928 - Forgings and Forging Stock (Annealed)
• AMS 4965 - Forgings (Solution Treated and Aged)
• AMS 4967 - Forgings (Annealed, Heat Treatable)

Physical Properties

Ti-6Al-4V Titanium Tube Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
Density: 0.160 lb/in3; 4.47 g/cm3
Beta Transus Temperature: 1,830°F (± 25°); 999°C (± 14°)

Heat Treatment

Annealing is performed at temperatures between 1,700-1,900°F (927 - 1,038°C) to achieve high hardness, tensile strength, and fatigue strength.
DAXUN 6-4 Grade 5 Titanium Tube offers versatile heat treatment options to suit a variety of applications.
1. Annealing: 1,275 -1,400°F (691 - 760°C), ½ to 2 hours, air or furnace cool
2. Stress Relief Annealing: 1,000 -1,200°F (538 - 649°C), 1 to 8 hours, air or furnace cool
3. Solution Heat Treating: 1,675 -1,750°F (913 - 954°C), 1 hour, water quench
4. Aging: 975 -1,025°F (524 - 552°C), 4 to 8 hours - air cool

Optimum Properties

Achieve peak performance with DAXUN's Ti-6Al-4V Titanium Tube. Smaller cross sections and rapid quenching yield the best results, while larger sections or slower quenching may lead to less than optimal properties.

Hardness

Experience superior hardness: Rockwell C 30-34 in the annealed state and approximately Rockwell C 35-39 when solution treated and aged.

Forgeability/Formability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube, offers excellent forgeability at 1,750°F (954°C) with a final forging temperature of 1,450°F (788°C). For optimal results, a reduction of at least 35% is recommended.

Despite its formidable nature at room temperature, even when annealed, DAXUN's Ti-6Al-4V Titanium Tube can undergo severe forming operations like bending or stretching at temperatures up to 1,200°F (649°C) without altering its mechanical properties. Utilize creep forming for hot sizing or shaping within the 1,000 to 1,200°F (538 to 649°C) range.

Machinability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube: Precision machining is possible with methods suited for austenitic stainless steels. Employ slow speeds, high feeds, excellent tool rigidity, and generous amounts of non-chlorinated cutting fluids.

Weldability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube is highly weldable whether annealed or solution and partially aged. Aging occurs during post-weld heat treatment.

Ensure purity by avoiding contamination with oxygen, nitrogen, and hydrogen. Utilize fusion welding within an inert gas-filled chamber or with an inert gas tail shield over the molten metal and adjacent hot zones. Techniques such as spot welding, seam welding, and flash welding can be performed without a protective atmosphere.

Special Considerations

Beware of potential contamination in DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube from hydrogen during improper pickling or from oxygen, nitrogen, and carbon absorption during forging, heat treatment, or brazing. Such contamination could reduce ductility and negatively impact notch sensitivity and formability.

FAQ

 

Q1: What products can you offer?

A: We offer a wide range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and 300 series.
Additionally, we provide 400 series and duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.

Q2. Can you produce the products according to my own drawings?

Yes, we can manufacture products exactly according to your drawings, ensuring they meet your highest expectations.

Q3. How does your factory do regarding quality control?

Quality is our top priority. We consistently place great emphasis on quality control from the beginning to the end of the production process.

Q4. Can I request to change the form of packaging and transportation?

Yes, we can modify the packaging and transportation forms according to your requests.
However, you will need to cover any additional costs and spreads incurred during this period.

Q5. How does your factory do regarding quality control?

Quality is our top priority. We consistently place great emphasis on quality control from the beginning to the end of the production process.

Q6. How long is the delivery time?

A: Our delivery time ranges from 7 to 20 working days after payment confirmation.
If the order is urgent, we will expedite the process to complete the order ahead of schedule.

Q7. What is your Payment?

A: 100% T/T advance, Western Union (for small orders)

B: 30% T/T deposit, with the remaining 70% paid before shipment

C: 100% Irrevocable LC at sight (for large orders)

Q8: Can you make DDQ (Deep Drawing Quality)?

A: Yes, we can. Our materials are suitable for applications like stainless steel pots, sinks, bowls, etc. Share your usage requirements with us, and we will adjust the mechanical properties accordingly.

Q9: How to get a sample?

A: FREE samples are available for your evaluation and testing. If you need a small piece, we may cover the courier cost, depending on the situation.

Q10: Which countries have you exported to?

A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.

Q11: How to visit your company?

A: Fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up.