| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | Gr5 Ti-6al-4V Gr7 Gr9 Gr23 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
Jiangsu Daxun Alloy Co., Ltd. produces and stocks commercially pure titanium plates Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses ranging from 0.5 mm to 120 mm. These titanium plates are considered the 'workhorses' in the commercially pure titanium family due to their outstanding combination of high strength, ductility, and excellent corrosion resistance, making them ideal for a wide range of industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their excellent balance between strength and ductility. They offer impressive impact strength and are easily weldable. These plates exhibit outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they provide superior resistance to seawater and salt solutions, making them highly versatile for various applications.
Gr5 (Grade 5) Ti-6Al-4V titanium alloy plates are a premier choice in titanium alloys. Comprising 90% titanium, 6% aluminum, and 4% vanadium, this α-β type titanium alloy features aluminum stabilizing the α phase and vanadium stabilizing the β phase. The Gr5 Ti-6Al-4V titanium alloy plate is celebrated for its exceptional comprehensive performance and process capabilities. Exhibiting excellent room temperature and high-temperature strength, good creep resistance, and thermal stability, this alloy is also known for its high fatigue performance and *** growth resistance in seawater, satisfactory fracture toughness, and resistance to hot salt stress corrosion. The Gr5 Ti-6Al-4V titanium alloy plate boasts outstanding process plasticity and superplasticity, suitable for various processing and welding methods.
About the chemical composition of Ti-6Al-4V (Grade 5) titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of Grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of Grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This premium titanium plate is meticulously produced through plate rolling, with the final step being cold rolling. These sheets are available in either a work-hardened or heat-treated condition, ensuring optimal durability and performance. Depending on your exact requirements, the sheets can undergo further mechanical or chemical processing for tailored applications. 2. Hot-Rolled Titanium Plate: Created through longitudinal rolling or a combination of longitudinal and transverse rolling methods, these titanium plates come in a thickness range of 3.0mm to 155mm. They are supplied in a heat-treated condition, with the option of creep flattening to eliminate internal stress and fulfill special flatness requirements. Whether you need cut blanks or complex shaped parts, these sheets can be customized per your specifications.3. Forged Titanium Plate: Produced by forging steel ingots on a vertical hydraulic press, these plates can also be made using open die forging, or a combination of open die forging and rolling. Standard slab dimensions include a thickness of up to 580 mm, width up to 2000 mm, and length up to 6000 mm. The exact dimensions and weight of the forged plates can be tailored through agreements between the manufacturer and the customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China, dedicated to creating the world's finest titanium alloy plates. We ensure swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our inventory includes Grade 5 (UNS R56400) alloy titanium plates with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm is cold rolled, 6.0-50mm is hot rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) is the cornerstone of titanium alloy materials, offering superior strength, ductility, and excellent resistance to corrosion and high temperatures. This makes it a preferred choice across general and military industries. Compliance: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
The Ti-6Al-4V Grade 5 Titanium Plate primarily serves the aerospace, military, power, vehicle armor, rocket precision guidance, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it ideal for deep drawing applications. Known for its exceptional general and seawater corrosion resistance, it also resists oxidizing, neutral, and mildly reducing media, including chlorides. With a low density-approximately half that of nickel-based alloys-it offers a high strength-to-weight ratio and superb corrosion resistance, making it perfect for a variety of harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile, featuring excellent cold formability, corrosion resistance, weldability, and impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plate, Titanium Gr 1 Sheets, Finished Plates, ASTM B265 Titanium Grade 1 Coils, Pure Titanium Gr 1 Hot Rolled Plates, Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Patterned Plates Dealers, Perforated Plates, and Titanium Grade 1 Sheet and Plate Manufacturers in China.
Grade 2
DAXUN produces and stocks commercially pure Grade 2 Titanium Plates (UNS R50400) in thicknesses ranging from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is the 'workhorse' of the commercially pure titanium family, offering a unique combination of high strength, ductility, and excellent corrosion resistance for a broad range of industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium that offers an exceptional balance of strength and ductility. It features good impact strength, weldability, and corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. It also excels in resisting seawater and salt solutions.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal material for diverse applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for most industrial applications requiring good ductility and corrosion resistance.
DAXUN is a metal authority specializing in both small and large titanium plate projects. We are your go-to partner, providing not just titanium plates but also comprehensive technical assistance. Consider DAXUN your strategic ally in overcoming any challenges and meeting all your project needs, enabling you to achieve your goals with confidence.
DAXUN's premier service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing to meet your demands. Leveraging advanced basic processing techniques, state-of-the-art water jet cutting, and efficient plate nesting capabilities, we deliver unparalleled value to our customers, streamlining their operations and significantly reducing both time and costs.
With ongoing investment in DAXUN's cutting-edge production facilities and strategic capacity agreements with our esteemed partners, we guarantee that DAXUN remains at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today to secure the most competitive prices and detailed technical information on our superior titanium plates.
Q1: What products can you offer?
A: We provide an extensive range of steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, and the 300 series. Our offerings also encompass duplex stainless steels like 2205, 2304, 2101, and 2507, as well as high-nickel alloys such as 904L, 800H, and 600H.
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.
Q2. Can you produce the products according to my own drawings?
Yes, we can manufacture products precisely according to your drawings to ensure your utmost satisfaction.
Q3. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize rigorous quality control throughout the entire production process.
Q4. Can I request to change the form of packaging and transportation?
Yes, we can modify the packaging and transportation forms as per your request;
however, please note that you will need to cover any additional costs incurred during this period.
Q5. How does your factory do regarding quality control?
Quality is our top priority. We consistently emphasize rigorous quality control throughout the entire production process.
Q6. How long is the delivery time?
A: Our standard delivery time ranges from 7 to 20 working days upon confirmation of payment.
If the order is urgent, we can expedite the process to meet your requirements.
Q7. What are your payment terms?
A: 100% T/T in advance or Western Union for small orders.
B: 30% T/T in advance with the remaining 70% before shipment.
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you provide Deep Drawing Quality (DDQ)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Simply inform us of your specific application, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: We offer FREE samples for your evaluation. If you need a small piece, we can cover the courier cost, depending on the situation.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and other countries.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}