| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates, based in China. Our mission is to produce world-class, high-performance titanium alloy plates, ensuring swift global delivery. We offer ASTM B265 Grade 2 and Grade 5 titanium plates, with thicknesses from 0.5mm to 300mm. Our Grade 5 plates (UNS R56400) are available in various forms: cold-rolled (0.5mm-6.0mm), hot-rolled (6.0mm-50mm), and forged (50mm and above). Renowned as the 'workhorse' of titanium alloys, Grade 5 titanium plates (Ti-6Al-4V) boast high strength, ductility, and superior resistance to corrosion and high temperatures, making them indispensable for both general and military industries. Our products comply with top international standards like ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plates consist of 90% titanium, 6% aluminum, and 4% vanadium, forming an α-β titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. These plates are celebrated for their exceptional comprehensive performance and favorable process capabilities. The TC4 titanium alloy features remarkable strength at both room and high temperatures, excellent creep resistance, thermal stability, superior fatigue performance, and *** growth resistance in seawater. Additionally, it offers satisfactory fracture toughness and resilience against hot salt stress corrosion. Its impressive process plasticity and superplasticity make it suitable for diverse processing, welding, and machining methods.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power, and marine industries, as well as for vehicle armor and rocket precision guidance components.
Grade 5 titanium alloy plates are the most commercially available titanium alloys, combining high strength with toughness. Ti-6Al-4V Grade 5 titanium alloy offers outstanding comprehensive properties:
Ti-6AL-4V titanium plates and sheets are ideal for parts requiring corrosion resistance, stress corrosion resistance, and high strength (400-450°C), with excellent ductility and lateral strength. Applications include: 1. Jet engine compressor blades, disks, rings, fuselage components like wings and bulkheads, turbine disks, doors, military aircraft heat shields, engine nozzles, landing gear doors, and fuselage superplastic forming parts. 2. Military uses such as armor, guidance systems, and shell casings. 3. Spacecraft components including ***s and heat shields. 4. Medical and surgical instruments. 5. Sports equipment like bicycle frames and golf clubs. 6. Various other applications demanding a high strength-to-weight ratio.
Daxun rigorously conducts a series of quality assurance tests, including flattening, pitting resistance, mechanical, hardness, material positive identification, and expansion tests. These thorough tests ensure the material's suitability for its intended applications. Throughout production, we meticulously measure the product's diameter, thickness, and surface. Standard delivery time is 5-7 days, with special size products taking 15-20 days.
Discover the intricate details about the chemical composition of our premium grade (Ti 6AL-4V) grade 5 titanium sheet. Understand why this alloy stands out in quality and performance.
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Learn about the refined chemical composition of our top-quality grade 2 titanium sheet. Discover the elements that contribute to its exceptional performance.This sheet is designed to offer superior quality and dependability, crafted from the finest grade 2 titanium.
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Unveil the robust mechanical properties of our distinguished grade 2 titanium sheet, known for its resilience and versatility. Our titanium sheet delivers outstanding performance, making it a perfect fit for a wide range of applications.
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is the ultimate metal expert, specializing in both small and large-scale titanium plate projects. As your essential point of reference and long-term partner, DAXUN is poised to provide unparalleled titanium plates and comprehensive technical assistance tailored to your business needs. Think of DAXUN not just as a mere supplier of premium industrial pure titanium plates and titanium alloy plates, but as your strategic ally in navigating any challenges and fulfilling your project aspirations with precision and excellence.
DAXUN's state-of-the-art service center in China boasts an extensive inventory of titanium plate products, ensuring rapid order processing. With advanced basic processing, precise water jet cutting, and efficient plate nesting services, we add substantial value for our clients, significantly reducing both time and costs.
Through continuous investment in our cutting-edge production facilities and strategic capacity agreements with our esteemed partners, DAXUN ensures that we remain at the pinnacle of titanium plate quality, both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and the latest technical insights. Your premier source for titanium excellence awaits.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates, based in China! Our mission is to produce the world's highest-performance titanium alloy plates and ensure swift global delivery. We offer ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains a robust inventory of Grade 5 (UNS R56400) alloy titanium plates, available in thicknesses from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold rolled, 6.0-50mm are hot rolled, and those over 50mm are forged. Grade 5 titanium plates (Ti-6Al-4V) are renowned for their outstanding strength, ductility, and superior corrosion and high-temperature resistance, making them indispensable in both general and military industries. They conform to standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plates are predominantly utilized in aerospace, military, power, vehicle armor, rocket precision guidance parts, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of premium Grade 1 titanium plates.
Pure Grade 1 titanium plates are celebrated for their excellent ductility and cold formability, making them perfect for deep drawing. Grade 1 titanium offers superb general and seawater corrosion resistance, as well as resistance to oxidizing, neutral, and mildly reducing media, including chlorides. With low density (about half that of nickel-based alloys), high strength-to-weight ratio, and exceptional corrosion resistance, it is ideal for demanding chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, boasting good cold formability, excellent corrosion resistance, outstanding weldability, and impressive impact hardness.
Leading producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, Finished Plates, Coils, Hot Rolled Plates, Cold Rolled Plates, Patterned Plates, and Perforated Plates. DAXUN supplies an extensive range of Titanium Gr 1 Sheets and Plates in China.
Grade 2
DAXUN manufactures and maintains an extensive inventory of commercially pure Grade 2 titanium plates (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is recognized as the 'workhorse' of commercially pure titanium, offering an ideal mix of strength, ductility, and exceptional corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium plate, strikes a perfect balance between strength and ductility. It boasts excellent impact strength, is easily weldable, and offers outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it exhibits excellent resistance to seawater and salt solutions.
Titanium's low density, superior strength-to-weight ratio, and outstanding corrosion resistance make it an ideal material for numerous applications. It effectively combats stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for most industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is your trusted expert for both small and large titanium plate projects. As your reference point and long-term partner, we are committed to providing titanium plates and comprehensive technical assistance. DAXUN is not just a supplier of industrial pure titanium plates and titanium alloy plates, but also a strategic partner dedicated to helping you overcome challenges and achieve your project goals.
At DAXUN's state-of-the-art service center in China, we maintain a robust inventory of titanium plate products, ensuring rapid order processing. Leveraging advanced techniques like basic processing, precision water jet cutting, and efficient plate nesting, we offer unparalleled added value to our customers, significantly reducing their time and costs.
DAXUN remains at the pinnacle of titanium plate quality through relentless investment in cutting-edge production facilities and strategic capacity agreements with our premium partners. Our commitment ensures unmatched product excellence both now and in the future.
Reach out to DAXUN today for the most competitive titanium plate prices and comprehensive technical information tailored to your needs.
){kind=link}