| Type: | Titanium Sheets |
|---|---|
| Application: | Industrial |
| Technique: | Hot Rolled |
| Grade: | GR5 |
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| Ti 6Al-4V Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr 5 Plate Length | 1000mm-13000mm or as required |
| Gr 5 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS R56400 Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr 5 Plate Process | Hot/ Cold Rolled/forging |
| UNS R56400 Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr 5 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr 5 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| Titanium Grade 5 Sheet ASTM | ASTM B265 |
| Titanium Grade 5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr 5 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr 5 strip (general) |
| Ti 6Al 4v Grade 5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
| Standard Ti-6Al-4V ALLOY Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm |
| Cold rolled Gr 5 Titanium Plate 0.5-6.4 mm | |
| Hot rolled Gr 5 Titanium Plate 3.0-60.0 mm | |
| UNS R56400 Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard ASTM B265 Titanium Alloy Gr 5 Sheet suppliers |
| Availability of Titanium Alloy Gr 5 Foil sizes | Thickness : 8-100 microns (0.00031-0.004 in) |
| Width: Up to 500 mm (19.5 in) | |
| Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. | |
| Cutting | To provide a comprehensive service, we use a variety of cutting methods, including: |
| Laser Plate Cutting,Plasma Plate Cutting,Oxy-propane Flame Cutting | |
| Plasma profiles | As per customer's drawings |
| Value added services for Cp Grade 5 Titanium Plate | Laser cutting, Waterjet cutting, Plasma cutting, Bending and mechanical processing, edge preparation, welding, sawing and shearing. |
| China Grade 5 Titanium Plate Manufacturer | ASTM B265 Titanium Alloy Gr 5 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;Gr 5 Titanium Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width;Alloy Titanium Grade 5 Clad plate: Alloy Titanium Grade 5 Clad plate is a composite steel plate made by bonding UNS R56400 Titanium Grade 5 Plate, etc.ASTM B265 Titanium Alloy Gr 5 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width. |
| UNS R56400 Plate Origin | CHINA |
| Packing of Ti-6Al-4V plate | Bundles with waterproof cloth outside or plywood box |
| Test | UT, SGS testing, TUV etc |
| Why buy UNS R56400 Sheet from DAXUN? | Free quote,Free sample,EN 10204 3.1,Mill Test Certificate is supplied with shipment.,NABL Approved Lab Reports,Any third party inspection is accepted.,Tested to ASTM A923 Method "C" or ASTM G48 Method "A".Minimum Nitrogen content and Ferrite Count Test |
DAXUN proudly stands as a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China. With a steadfast commitment to engineering the world's highest performance titanium alloy plates, we ensure swift global delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN maintains an extensive inventory of Grade 5 (UNS R56400) alloy titanium plates, ranging in thickness from 0.5mm to 300mm. Plates from 0.5mm to 6.0mm are cold rolled, 6.0mm to 50mm are hot rolled, and those above 50mm are forged. Grade 5 titanium plate (Ti-6Al-4V) is acclaimed as the "workhorse" of titanium alloys due to its high strength, excellent ductility, superb corrosion resistance, and high-temperature tolerance. These attributes make it indispensable for both general and military applications. Our products comply with an array of standards including ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
The Ti-6Al-4V Grade 5 titanium plate, comprising 90% titanium, 6% aluminum, and 4% vanadium, is an α-β titanium alloy where aluminum stabilizes the α phase and vanadium stabilizes the β phase. Its standout features include excellent comprehensive and process performance, impressive room temperature and high temperature strength, remarkable creep resistance, and thermal stability. This alloy also boasts high fatigue performance and resistance to *** growth in seawater, satisfactory fracture toughness, and resilience against hot salt stress corrosion. Additionally, Ti-6Al-4V titanium plate offers excellent process plasticity and superplasticity, making it suitable for various processing methods including welding and machining.
Ti-6Al-4V Grade 5 titanium plate finds prominent use in aerospace, military, power, vehicle armor, rocket precision guidance parts, and marine industries, among others.
The Grade 5 titanium alloy plate is the most commercially prevalent titanium alloy, combining high strength with exceptional toughness. Ti-6Al-4V Grade 5 titanium alloy offers comprehensive properties including:
Ti-6AL-4V titanium plates and sheets are primarily utilized in components requiring corrosion and stress corrosion resistance as well as high strength (400-450°C). Key applications include: 1. Aerospace: Jet engine compressor blades, disks and rings, fuselage components like wings, turbine disks, doors, bulkheads, military aircraft hardware, heat shields, engine nozzles, landing gear doors, and superplastic forming parts. 2. Military: Armor, guidance systems, and shell casings. 3. Spacecraft: ***s and heat shields. 4. Medical: Surgical instruments and devices. 5. Sports: Bicycle frames and golf clubs. 6. Other applications necessitating a high strength-to-weight ratio.
Daxun meticulously conducts a series of quality assurance tests including flattening, pitting and resistance, mechanical, hardness, material positive identification, and expansion tests. These rigorous evaluations ensure material suitability for intended applications. Throughout production, we accurately measure the product's diameter, thickness, and surface. Our standard delivery period is 5-7 days, with customized size products delivered within 15-20 days.
Delving into the Chemical Composition of (Ti 6AL-4V) Grade 5 Titanium Sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
Unveiling the Chemical Composition of Grade 2 TitaniumSheets for Versatile Applications
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
Analyzing the Mechanical Properties of Grade 2 Titanium Sheets with Exceptional Durability
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
DAXUN is a leading authority in both small and large-scale titanium plate projects. As your dedicated reference point and long-term ally, DAXUN is committed to providing not only top-quality titanium plates but also unparalleled technical support. Think of DAXUN as more than just a supplier; envision us as your essential strategic partner, ready to overcome any challenges and meet your specific needs. With DAXUN by your side, you'll achieve your project goals effortlessly.
DAXUN's service center in China maintains a comprehensive stock of titanium plate products, ensuring rapid order fulfillment. We offer value-added services such as basic processing, water jet cutting, and plate nesting, all designed to save you time and reduce costs. With DAXUN, efficiency meets excellence.
DAXUN's continuous investment in production facilities and strategic capacity agreements with our partners ensure that we remain at the cutting edge of titanium plate quality, both now and in the future. Our commitment to innovation keeps us ahead of industry standards.
Reach out to DAXUN today to access the latest pricing and technical information on our premium titanium plates. Let us be your guide to superior titanium solutions.
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier from China. We are dedicated to creating the world's finest high-performance titanium alloy plates, ensuring expedited global delivery. Our extensive stock includes ASTM B265 Grade 2 and Grade 5 Titanium Plates with thicknesses ranging from 0.5mm to 300mm. Cold rolled (0.5mm-6.0mm), hot rolled (6.0-50mm), and forged (50mm and above) options are available. Grade 5 titanium plate (Ti-6Al-4V) is renowned for its exceptional strength, ductility, and superior resistance to corrosion and high temperatures, making it the preferred choice for both general and military industries. Compliance with standards: ASTM, ASME, AMS, GB, GJB, MIL, JIS, EN, etc.
Ti-6Al-4V Grade 5 titanium plate finds its primary applications in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and the marine industry.
Grade 1
DAXUN Alloys stands as a premier global producer and supplier of top-quality Grade 1 titanium plate, setting industry benchmarks.
Pure Grade 1 titanium plate, celebrated for its excellent ductility and cold formability, is ideal for deep drawing applications. Known for its outstanding general and seawater corrosion resistance, Grade 1 titanium also resists oxidizing, neutral, and mildly reducing media, including chlorides. Its low density, about half that of nickel-based alloys, combined with a high strength-to-weight ratio, makes it perfect for harsh chemical environments. Commercially pure Grade 1 titanium is the softest and most ductile variant, boasting superior cold formability, excellent corrosion resistance, exceptional weldability, and impressive impact hardness.
We are producers of ASTM B265 Titanium Gr 1 Plates, Titanium Gr 1 Sheets, and Finished Plates. Our offerings include hot and cold-rolled plates, coils, patterned, perforated plates, and sheets, all crafted to meet the highest standards as leading manufacturers and suppliers in China.
Grade 2
DAXUN offers and stocks an extensive range of commercially pure Grade 2 Titanium Plates (UNS R50400) with thicknesses from 0.5mm to 120mm. This 'workhorse' of commercially pure titanium combines robust strength, pliability, and excellent corrosion resistance, catering to numerous industrial applications.
Grade 2 Titanium Plate, a commercially pure titanium, strikes an ideal balance between strength and ductility. With good impact strength, easy weldability, and exceptional resistance to corrosion in highly oxidizing environments, alkaline media, brine solutions, and wet ***, it is also highly resistant to seawater and salt solutions.
With low density, high strength-to-weight ratio, and corrosion resistance, titanium is a prime choice for myriad applications. It is particularly effective against stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the go-to for industrial applications demanding excellent ductility and corrosion resistance.
DAXUN is your metal expert for both small and large titanium plate projects. As your reliable reference and long-term partner, we provide titanium plates and comprehensive technical assistance. DAXUN is more than a supplier of industrial pure titanium plates and titanium alloy plates; we are your strategic partner, ready to help you overcome challenges and achieve your project goals.
DAXUN's state-of-the-art service center in China boasts a robust stock of premium titanium plate products, ensuring rapid order fulfillment. Our comprehensive services, including precision water jet cutting and efficient plate nesting, deliver exceptional value to our customers, significantly reducing both time and expense.
DAXUN's unwavering commitment to innovation, reflected in our continuous investment in advanced production facilities and strategic capacity agreements with key partners, guarantees that we remain at the pinnacle of titanium plate quality, both today and in the future.
Reach out to DAXUN today to access the most competitive titanium plate prices and detailed technical information.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}