Gr5 Titanium Alloy Pipe Ti6al4V Seamless Pipe Factory Direct Sales ASME Sb-861 High Strength Power Industry Grade 5 Titanium Pipe

• Type: Titanium Pipes
• Application: Industrial, Medical
• Technique: Hot Rolled
• Grade: Gr5 Grade5 6-4 Ti6al4V
• Shape: Round
• Standards: Astmb861 B862 B338 ASME Sb861 Sb862 Sb338
• Titanium Plate Grade: Grade 5 Uns R50600
• Transport Package: Wooden Box
• Specification: φ 6.35mm-φ 1219mm
• Trademark: Daxun
• Origin: China
• Production Capacity: 1000ton

Product Description

Product Parameters

 

Ti-6Al-4V Grade 5 Titanium pipe & Tubes Specification	ASTM B338 / ASTM B861 / ASTM B862 / ASME SB338 / ASME SB861 / ASME SB862
Grade 5 Titanium pipe & Tubes Grades	Commercially pure titanium Grade 5-Ti-6Al4V- TC4- USN 56400
Grade 5 Titanium pipe & Tubes Type	ot Rolled / Cold Drawn / Welded / ERW
Grade 5 Titanium pipe & Tubes Outer Diameter Size	Titanium seamless pipe - φ1.0mm to φ508.3mm
	Titanium welded pipe - φ6.0mm to φ1219mm
Grade 5 Titanium pipe & Tubes Wall Thickness	1.0mm-50mm (customizable wall thickness)
Grade 5 Titanium pipe & Tubes Length	5 to 7 Meters, 09 to 13 Meters, Single Random Length, Double Random Length And Customize Size.
Titanium pipe Form Ti-6Al-4V	' Hollow, U' bent, LSAW, Hydraulic, Straight Tube, Boiler, Round, Tube Coil, Square, Rectangular Etc
Marking  TC4 1.37165	All Titanium Tubes Tubing are marked as follows: Grade, Standard, Thickness, OD, Heat No., Length (Or according to the customer's request.)
Uses of Titanium Alloy Tubes	Gas pipes, oil pipes, heat exchanger tubes, boiler tubes, fluid pipes, titanium exhaust pipes.
Grade 5 Titanium pipe & Tubes Pipe Ends	Plain Ends / Beveled Ends
Grade 5 Titanium pipe & Tubes Delivery Conditions	As Rolled, Cold Drawn, Hot Finish, Stress Relieved, Annealed, Hardened, Tempered
Grade 5 Titanium pipe & Tubes Coating	Electropolish, Mechanical Polish, Satin Finish, Passivated
Grade 5 Titanium pipe & Tubes Other Testing	ardness Test, Hydrostatic Test, Eddy Current test, Eddy Current, Tensile Test, Flattening, Flare Test, Annealed, Hydrostatic Test, Tempered, Stress Relieved etc.
Grade 5 Titanium pipe & Tubes Dimension	All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM And ASME
Grade 5 Titanium pipe & Tubes Value Added Services	Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment
Grade 5 Titanium pipe & Tubes Packaging	Loose / Bundle / Wooden Pallet / Wooden box-a / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector
Grade 5 Titanium pipe & Tubes Shipment & Transportation	By Road - Truck / Train, By Sea - Break-bulk Conventional Vessel / FCL (Full Container Load) / LCL (Less Container Load) / 20 Feet Container / 40 Feet Container / 45 Feet Container / High Cube Container / Open Top Container, By Air - Freighter Civil Passenger and Cargo Planes
Grade 5 Titanium pipe & Tubes Material Test Certificate	Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC

 

Detailed Photos

Versatile Applications and Robust Standards

Grade 5 Titanium Tubes: Trusted Across High-Stakes Industries in Extreme Corrosive Environments:

• • Chemical Processing Components • Military and Defense Sector • Aerospace and Aviation • Chemical and Energy Sector • Marine Engineering • Oil and Gas Industry • Rocketry and Missile Applications • Military Armor • Shipbuilding and Marine Vessels • Industrial Machinery • Power Generation • Paper and Pulp Processing • Pharmaceutical and Food Processing Equipment
• High-Standards Specifications: ASTM B861, B862, B338 / ASME SB861, SB862, SB338
• Adhering to Prestigious Standards: ASTM, GB, GJB, ASME, and API

 

Ensuring Quality, Timely Delivery, and Rigorous Inspection

At Daxun, Quality Assurance is Paramount. Our Tests Include: Flattening, Flaring, Ultrasonic Flaw Detection, Pitting and Resistance, Mechanical, Hardness, Material Positive Identification, Expansion Tests, and more. These validations ensure the Grade 1 Titanium Welded and Seamless Pipes are impeccably suited for varied applications. We meticulously measure diameter, thickness, and surface during production. Standard delivery is 5-7 days, with special sizes taking 15-20 days.

• We Guarantee Delivery Timelines in Strict Accordance with Contractual Agreements.
• We Welcome Third-Party Agency Inspections at Our Facility
• Offering Complimentary Samples for Client Testing
• Open to On-Site or Virtual Factory Inspections

 

Noteworthy Features of Grade 5 Titanium Tubes

The Ti-6Al4V Grade 5 Titanium Alloy Tube: A Commercial Titan Known for Its High Strength and Toughness. It Exhibits Excellent Welding and Processing Properties:

• • High Strength Titanium Alloy
• • Heat Treatable for Enhanced Performance
• • Superior Ductility for Diverse Applications
• • Excellent Machinability
• • Outstanding Weldability

We Stock and Distribute: Grade 5 Titanium Alloy Seamless Tubes, Forged Seamless Tubes, Welded Tubes, and More.

 

As a Premier Manufacturer and Supplier, Daxun Alloy Delivers Top-Tier Grade 5 Titanium Pipes Globally, Earning High Praise Across Numerous Projects.

Ti 6Al-4V (Grade 5 Titanium): The Industry Favorite, Constituting Over 50% of Total Titanium Usage. Typically Annealed, It Functions Up to 400°C (750°F). Ti 6Al/4V is Compatible with Matching or ELI Filler Wire. It Offers Superior Strength, Stiffness, and Thermal Properties Compared to Pure Titanium (excluding thermal conductivity, which is about 60% lower). Additionally, It Can Be Heat Treated for Ideal Strength and Performance. Its Seamless Tubes Boast Strong Formability, Low Density, and Exceptional Corrosion Resistance.

Grade 5 Titanium: The Optimal Blend of Strength, Corrosion Resistance, Weldability, and Machinability. Widely Utilized in Military Aircraft, Rocket Parts, Precision-Guided Components, Armor Parts, Ship Equipment, and Military Vacuum Equipment. The Close Variant, 6-4ELI, Finds Use in Surgical Implants. Optimal for Temperatures Up to 400°C, It Enhances Ductility and Toughness in Cold Conditions. Available in an Annealed State, It's Easy to Heat Treat for Increased Strength, Catering to a Variety of Applications. This All-Purpose Titanium Alloy Offers Ideal Properties from -210°C to 400°C, Making It the Most Commercialized Titanium Alloy with High Strength and Toughness, Plus Excellent Welding and Processing Features.

cf48ccae

Packaging & Shipping

Company Profile

Titanium Seamless Tubes
Daxun produces:
Hot-finished Titanium Tubes
These tubes are supplied in a pristine form, either hot-rolled or hot-extruded. Each tube is meticulously straightened, with both inside and outside diameters precisely machined and surfaces polished to perfection. Available in both heat-treated and non-heat-treated variants, our tubes undergo 100% ultrasonic flaw detection to ensure unmatched quality and reliability.
Titanium Tube Materials Available:
Hot-rolled Titanium Tubes: Outer diameters ranging from 19mm to 325mm, wall thickness from 9mm to 30mm, and lengths up to 5000mm (subject to agreement between manufacturer and customer). - Hot-extruded Titanium Tubes: Outer diameters from 50mm to 160mm, wall thickness from 7mm to 35mm, and lengths up to 3000mm (subject to agreement between manufacturer and customer).
Cold-finished Titanium Tubes
Cold-finished Titanium Tubes are available in heat-treated form, with surface etching, hydrostatic testing, or ultrasonic testing as per manufacturing specifications. Specifications: Outer diameters from 6mm to 89mm, wall thickness from 0.5mm to 11mm, and lengths up to 6000mm (subject to agreement between manufacturer and customer).

Titanium Welded Pipes
DaXun manufactures and supplies titanium pipes with precision, featuring diameters ranging from 12.7 mm to 38.1 mm (0.47 in to 1.5 in), and wall thickness from 0.4 mm to 1.65 mm (0.016 in to 0.065 in), with lengths extending up to 25000 mm. These titanium alloy pipes, available in Gr1, Gr2, and Gr12, are ideal for engineering and chemical industries. Constructed from flat rolled raw material through automatic tungsten inert gas (argon) welding on electric pipe welders, and heat-treated on the mill line, each welded pipe undergoes rigorous mechanical testing, geometrical measurements, 100% ultrasonic and eddy current testing, as well as pneumatic or hydrostatic testing. Pipes are meticulously packed according to customer specifications. Our advanced manufacturing processes and inspection test equipment ensure that thin wall welded pipes meet the stringent ASTM B 338 and ASME SB 338 standards.

CP GR1 Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.50 g/cc	0.163 lb/in³
a Lattice Constant	2.95 Å @Temperature 25.0 °C	2.95 Å @Temperature 77.0 °F	alpha phase
	3.29 Å @Temperature 900 °C	3.29 Å @Temperature 1650 °F	beta phase
c Lattice Constant	4.683 Å	4.683 Å @Temperature 77.0 °F	c/a = 1.587
Mechanical Properties	Metric	English	Comments
Hardness, Brinell	120	120	annealed
Hardness, Knoop	132	132	Estimated from Brinell.
Hardness, Rockwell B	70	70	annealed
Hardness, Vickers	122	122	Estimated from Brinell.
Tensile Strength	124 - 138 MPa @Temperature 427 °C	18000 - 20000 psi @Temperature 801 °F
	152 - 179 MPa @Temperature 316 °C	22000 - 26000 psi @Temperature 601 °F
	193 - 207 MPa @Temperature 204 °C	28000 - 30000 psi @Temperature 399 °F
Tensile Strength, Ultimate	240 MPa	34800 psi
Tensile Strength, Yield	170 - 310 MPa	24700 - 45000 psi
	76.0 - 90.0 MPa @Temperature 427 °C	11000 - 13100 psi @Temperature 801 °F	0.2% offset
	83.0 - 103 MPa @Temperature 316 °C	12000 - 14900 psi @Temperature 601 °F	0.2% offset
	110 - 124 MPa @Temperature 204 °C	16000 - 18000 psi @Temperature 399 °F	0.2% offset
Elongation at Break	24%	24%
	25 - 30 % @Temperature 427 °C	25 - 30 % @Temperature 801 °F
	30 - 35 % @Temperature 316 °C	30 - 35 % @Temperature 601 °F
	40 - 50 % @Temperature 204 °C	40 - 50 % @Temperature 399 °F
Reduction of Area	35%	35%
Tensile Modulus	103 GPa	14900 ksi
Compressive Modulus	110 GPa	16000 ksi
Poissons Ratio	0.37	0.37
Shear Modulus	45.0 GPa	6530 ksi
Charpy Impact	310 J	229 ft-lb	V-notch
Impact Test	136 J	100 ft-lb	Impact Strength
Coefficient of Friction, Dynamic	0.68	0.68	Ti sliding on Ti; 300 m/min
	0.8	0.8	Ti sliding on Ti; 40 m/min

 

CP GR2 Titanium tube PHYSICAL PROPERTIES
Density	Magnetic Permeability
0.163 lbs/in-3	Nonmagnetic
4.51 g/cm-3	Electrical Resistivity
Beta Transus (+/-25°F, +/--3.9°C)	21 µΩ/in
1680°F	0.53 µΩ/m
915°C	Elastic Modulus
Thermal Conductivity	15.2-17.4 Msi
12.60 BTU hr-1ft-1 °F-1	105-120 GPa
21.79 W m-1 °C-1	Typical values at room temperature of about 68-78°F (20-25°C)

 

GR5 TI6AL4V Titanium tube PHYSICAL PROPERTIES
Physical Properties	Metric	English	Comments
Density	4.43 g/cc	0.16 lb/in³
Mechanical Properties
Hardness, Brinell	334	334	Estimated from Rockwell C.
Hardness, Knoop	363	363	Estimated from Rockwell C.
Hardness, Rockwell C	36	36
Hardness, Vickers	349	349	Estimated from Rockwell C.
Tensile strength	min. 895MPa	129810 psi
Yield strength	min. 828MPa	120090 psi
Elongation at Break	min.10 %	10 %
Reduction of Area	min.25 %	25 %
Modulus of Elasticity	113.8 GPa	16500 ksi
Compressive Yield Strength	970 MPa	141000 psi
Notched Tensile Strength	1450 MPa	210000 psi	Kt (stress concentration factor) = 6.7
Ultimate Bearing Strength	1860 MPa	270000 psi	e/D = 2
Bearing Yield Strength	1480 MPa	215000 psi	e/D = 2
Poisson's Ratio	0.342	0.342
Charpy Impact	17 J	12.5 ft-lb	V-notch
Fatigue Strength	240 MPa	34800 psi	at 1E+7 cycles. Kt (stress concentration factor) = 3.3
Fatigue Strength	510 MPa	74000 psi	Unnotched 10,000,000 Cycles
Fracture Toughness	75 MPa-m½	68.3 ksi-in½
Shear Modulus	44 GPa	6380 ksi
Shear Strength	550 MPa	79800 psi	Ultimate shear strength
Electrical Properties
Electrical Resistivity	0.000178 ohm-cm	0.000178 ohm-cm
Magnetic Permeability	1.00005	1.00005	at 1.6kA/m
Magnetic Susceptibility	3.30E-06	3.30E-06	cgs/g
Thermal Properties
CTE, linear 20°C	8.6 µm/m-°C	4.78 µin/in-°F	20-100ºC
CTE, linear 250°C	9.2 µm/m-°C	5.11 µin/in-°F	Average over the range 20-315ºC
CTE, linear 500°C	9.7 µm/m-°C	5.39 µin/in-°F	Average over the range 20-650ºC
Specific Heat Capacity	0.5263 J/g-°C	0.126 BTU/lb-°F
Thermal Conductivity	6.7 W/m-K	46.5 BTU-in/hr-ft²-°F
Melting Point	1604 - 1660 °C	2920 - 3020 °F
Solidus	1604 °C	2920 °F
Liquidus	1660 °C	3020 °F
Beta Transus	980 °C	1800 °F

 

Certifications

Ti-6Al-4V - Grade 5 Titanium Tube

• Titanium Alloy - (UNS R56400)

INTRODUCTION

• DAXUN Ti-6Al-4V, Grade 5 Alloy Tube (UNS R56400) stands as the most sought-after titanium alloy. This duplex alpha+beta titanium alloy employs aluminium as an alpha stabilizer and vanadium as a beta stabilizer, delivering exceptional strength. It performs admirably at cryogenic temperatures up to 800°F (427°C). ATI Ti-6Al-4V, Grade 5 alloy is versatile, suitable for annealing, solution treatment, and ageing. Applications span from compressor blades, discs, and rings for jet engines to fuselage and space capsule components, pressure containers, *** cases, helicopter rotor hubs, fasteners, and vital forgings where a high strength-to-weight ratio is paramount.
• Initially, the alloy undergoes melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). Subsequent remelting is performed through one or two vacuum arc steps.

SPECIFICATIONS

• ASTM B338 - Tubes Titanium tubes standard, heat treatable
• AMS 4928 - Forgings and forging stock (annealed)
• AMS 4965 - Forgings (solution treated and aged)
• AMS 4967 - Forgings (annealed, heat treatable)

PHYSICAL PROPERTIES

• Melting Range: 2,800 - 3,000°F (1,538 - 1,649°C)
• Density: 0.160 lbs/cu. in.; 4.47 gm/cc
• Beta Transus Temperature: 1,830°F (± 25°); 999°C (± 14°)

HEAT TREATMENT

• Annealing at 1,700 - 1,900°F (927 - 1,038°C) is performed to achieve superior hardness, tensile, and fatigue strength.
• DAXUN 6-4™, Grade 5 Alloy offers multiple heat treatment options.
• 1. Anneal: 1,275 - 1,400°F (691 - 760°C), ½ to 2 hours, air or furnace cool
• 2. Stress Relief Anneal: 1,000 - 1,200°F (538 - 649°C), 1 to 8 hours, air or furnace cool
• 3. Solution Heat Treatment: 1,675 - 1,750°F (913 - 954°C), 1 hour, water quench
• 4. Aging Treatment: 975 - 1,025°F (524 - 552°C), 4 to 8 hours, air cool
• In the solution treated and aged condition, the optimal properties are achieved in small cross-sections that are quickly quenched.
  Larger section sizes or a quench delay can result in lower properties than the optimum values.

HARDNESS

Typical hardness ranges from Rockwell C 30-34 in the annealed condition to Rockwell C 35-39 in the solution and aged condition.

FORGEABILITY/ FORMABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy tubes are forged at 1,750°F (954°C) with an end forging temperature of 1,450°F (788°C). For best results, a reduction of at least 35% is advised.
• DAXUN Ti-6Al-4V, Grade 5 alloy is renowned for its challenging formability at room temperature, even in an annealed state. Consequently, severe forming operations like bending or stretching can be executed on annealed material at elevated temperatures up to 1,200°F (649°C) without compromising its mechanical integrity. For hot sizing or forming, creep forming is applicable at temperatures ranging from 1,000 to 1,200°F (538 to 649°C).

MACHINABILITY

• DAXUN Ti-6Al-4V, Grade 5 alloy can be effectively machined using techniques tailored for austenitic stainless steels, including slow speeds, heavy feeds, and robust
  tooling, complemented by generous amounts of non-chlorinated cutting fluid.

WELDABILITY

• DAXUN Ti-6Al-4V Grade 5 Alloy Titanium Tube exhibits excellent weldability in both annealed and solution-treated, partially aged forms, with ageing.
• performed during post-weld heat treatment. It's crucial to avoid contamination by oxygen, nitrogen, and hydrogen. Fusion welding can be executed in an inert gas-filled chamber or with an inert gas tail shield protecting the molten metal and adjacent hot area. Spot welding, seam welding, and flash welding can be conducted without a protective environment.

SPECIAL PRECAUTIONS

• DAXUN Ti-6Al-4V, Grade 5 alloy is susceptible to hydrogen contamination from improper pickling, and it can absorb oxygen, nitrogen, and carbon during processes like forging, heat treatment, and brazing. Such contamination can diminish ductility, affecting notch sensitivity and forming capabilities.

Ti-6Al-4V Titanium Pipe- Grade 5 Titanium Tube

Titanium Alloy - (UNS R56400)
Introduction
DAXUN Ti-6Al-4V Titanium Tube, Grade 5 (UNS R56400) stands as the most prominent titanium alloy. This duplex alpha+beta titanium alloy incorporates aluminum as the alpha stabilizer and vanadium as the beta stabilizer. Capable of high strength and performance at temperatures as low as 800°F (427°C), ATI Ti-6Al-4V, Grade 5 alloy is ideal for annealing, solution treating, and aging. It finds applications in compressor blades, disks, and rings for jet engines, fuselage and space capsule components, pressure vessels, *** cases, helicopter rotor hubs, fasteners, and critical forgings demanding a high strength-to-weight ratio.
Initially melted via vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM), the alloy undergoes remelting in one or two vacuum arc steps.
Specifications
• ASTM B338 - Standard Heat Treatable Titanium Tube
• AMS 4928 - Forgings and Forging Stock (Annealed)
• AMS 4965 - Forgings (Solution Treated and Aged)
• AMS 4967 - Forgings (Annealed, Heat Treatable)

Physical Properties

Ti-6Al-4V Titanium Tube Melting Range: 2,800-3,000°F (1,538 - 1,649°C)
Density: 0.160 lb/in3; 4.47 g/cm3
Beta Transus Temperature: 1830°F (± 25°); 999°C (± 14°)

Heat Treatment

Annealed at 1,700-1,900°F (927 - 1,038°C) to achieve high hardness, tensile strength, and fatigue resistance.
DAXUN 6-4 Grade 5 Titanium Tube offers versatile heat treatment options tailored to meet diverse industrial needs.
1. **Annealing:** Achieve optimal results by treating at temperatures between 1,275 - 1,400°F (691 - 760°C) for ½ to 2 hours, followed by air or furnace cooling.
2. **Stress Relief Annealing:** Maintain stress-free properties by treating at 1,000 - 1,200°F (538 - 649°C) for 1 to 8 hours, with subsequent air or furnace cooling.
3. **Solution Heat Treating:** For superior strength, treat at 1,675 - 1,750°F (913 - 954°C) for 1 hour, then water quench.
4. **Aging:** Enhance durability by treating at 975 - 1,025°F (524 - 552°C) for 4 to 8 hours, followed by air cooling.

Optimum Properties

Achieve optimal properties with small cross sections and rapid quenching during the solution-treated and aged state. Larger cross sections or delayed quenching may result in reduced performance.

Hardness

In its annealed form, hardness typically ranges from Rockwell C 30-34. In the solution and aged condition, expect approximately Rockwell C 35-39.

Forgeability/Formability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube is expertly forged at 1,750°F (954°C) with a final forging temperature of 1,450°F (788°C). A minimum reduction of 35% is recommended for best outcomes.

Despite challenges in forming at room temperature, even when annealed, severe forming operations such as bending or stretching can be successfully performed at up to 1,200°F (649°C) without altering mechanical properties. Creep forming is effective for hot sizing or forming within 1,000 to 1,200°F (538 to 649°C).

Machinability

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube can be efficiently machined using techniques suited for austenitic stainless steels. Optimum results are achieved with slow speeds, high feeds, robust tool rigidity, and copious amounts of non-chlorinated cutting fluids.

Weldability

DAXUN Ti-6Al-4V Titanium Tube Grade 5 Titanium Tube demonstrates excellent weldability in both annealed and solution and partially aged conditions. Aging should be executed during post-weld heat treatment to ensure integrity.

To prevent contamination, avoid exposure to oxygen, nitrogen, and hydrogen. Fusion welding can be performed in an inert gas-filled chamber or with an inert gas tail shield. Spot, seam, and flash welding are achievable without a protective atmosphere.

Special Considerations

DAXUN Ti-6Al-4V Titanium Tube, Grade 5 Titanium Tube is susceptible to contamination by hydrogen, oxygen, nitrogen, and carbon during processes like pickling, forging, heat treating, and brazing. Such contamination can reduce ductility and compromise formability and notch sensitivity.

FAQ

 

Q1: What products can you offer?

A: We offer a wide range of steel types, including common varieties such as 310S, 316L, 304, 304L, 201, 904L, 316H, and 316. Additionally, we provide an extensive selection of high-nickel alloys and duplex stainless steels like 2205, 2304, 2101, 2507, and 800H.
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.

Q2. Can you produce the products according to my own drawings?

A: Yes, we can manufacture products based on your drawings to ensure they meet your specific requirements.

Q3. How does your factory manage quality control?

A: Quality is our top priority. We implement stringent quality control measures at every stage of the manufacturing process, from inception to completion.

Q4. Can I request to change the form of packaging and transportation?

A: Yes, we can accommodate requests to modify packaging and transportation methods according to your needs.
However, please note that you will need to cover any additional costs and price differences incurred during this process.

Q5. How does your factory manage quality control?

A: Quality is our top priority. We implement stringent quality control measures at every stage of the manufacturing process, from inception to completion.

Q6. How long is the delivery time?

A: Our standard delivery time is 7 to 20 working days after payment confirmation.
For urgent orders, we can expedite production to meet your deadlines.

Q7. What payment methods do you accept?

A: We accept various payment methods to suit your convenience:

B: 30% T/T in advance and the remaining 70% before shipment.

C: 100% Irrevocable Letter of Credit (LC) at sight for large orders.

Q8: Can you produce Deep Drawing Quality (DDQ) materials?

A: Yes, we specialize in DDQ materials that are ideal for making stainless steel pots, sinks, bowls, and more. Inform us of your specific application, and we will adjust the mechanical properties to meet your needs.

Q9: How can I obtain a sample?

A: We offer FREE samples for your evaluation and testing. For small sample pieces, we can cover the courier costs, depending on the situation.

Q10: Which countries have you exported to?

A: We have successfully exported stainless steel materials to numerous countries, including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and many more.

Q11: How can I visit your company?

A: The nearest airport to our company is Guangzhou Baiyun International Airport. Upon your arrival, we will arrange a pickup for you.