| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN is a trusted producer and stockist of commercially pure titanium plates Gr1 Gr2 Gr3 Gr4 (UNS), offering thicknesses from 0.5 mm to 120 mm. These grades are celebrated for their outstanding combination of high strength, ductility, and superior corrosion resistance, making them the cornerstone of the commercially pure titanium family, ideal for a multitude of industrial applications.
Gr1 Gr2 Gr3 Gr4 titanium plates stand out as commercially pure titanium offerings. They provide a remarkable balance between strength and ductility, boast impressive impact strength, and are highly weldable. Their exceptional corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, wet ***, as well as excellent resistance to seawater and salt solutions, make them indispensable in numerous applications.
Gr5 grade 5 Ti-6Al-4V titanium alloy plates are composed of 90% titanium, 6% aluminum, and 4% vanadium. This α-β titanium alloy benefits from aluminum stabilizing the α phase and vanadium stabilizing the β phase. The Gr5 Ti-6Al-4V alloy is renowned for its superb comprehensive performance and process capabilities. TC4 titanium alloy excels in both room and high-temperature strength, creep resistance, thermal stability, fatigue performance, *** growth resistance in seawater, and offers remarkable fracture toughness and hot salt stress corrosion resistance. Additionally, its exceptional process plasticity and superplasticity, suitable for various processing and welding methods, make it a versatile choice for numerous applications.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Crafted through meticulous plate rolling, the final rolling step in this process involves cold rolling. These sheets are offered in both work-hardened and heat-treated conditions. Depending on your specific requirements, further processing-whether mechanical or chemical-can be seamlessly integrated. 2. Hot-Rolled Titanium Plate: Produced via longitudinal rolling as well as longitudinal and transverse rolling, these plates boast a thickness range from 3.0mm to 155mm, all delivered in a heat-treated state. For those requiring it, creep flattening can be employed as part of the heat treatment to eliminate internal stress and meet special flatness specifications. Additionally, sheets can be provided as meticulously cut blanks, perfect for complex shaped parts. Custom processing is available to precisely meet your demands.3. Forged Titanium Plate: This method involves forging the steel ingot on a vertical hydraulic press followed by rolling, or employing open die forging before rolling. Standard dimensions for these slabs reach up to a thickness of 580 mm, width of 2000 mm, and length of 6000 mm. Dimensions and weights are customized based on mutual agreement between the manufacturer and the client.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plate Manufacturer and Supplier based in China! Our mission is to create the world's highest-performance titanium alloy plates. We offer rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. DAXUN produces and stocks Grade 5 (UNS R56400) titanium plates with thicknesses ranging from 0.5mm to 300mm (0.5mm-6.0mm is cold rolled, 6.0-50mm is hot rolled, and 50mm and above are forged). Grade 5 titanium plate (Ti-6Al-4V) is widely regarded as the 'workhorse' of titanium alloy materials, combining high strength, ductility, and outstanding corrosion and high-temperature resistance. This makes it a favorite in both general and military industries. Our plates comply with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, and more.
Ti-6Al-4V Grade 5 titanium plate is chiefly utilized in aerospace, military, power industry, vehicle armor, rocket precision guidance parts, and marine industries.
Grade 1
Today, DAXUN Alloys stands as a leading global producer and supplier of top-quality Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts excellent ductility and cold formability, making it perfect for deep drawing. Noted for its general and seawater corrosion resistance, Grade 1 titanium resists oxidizing, neutral, and mildly reducing environments, including chlorides. Titanium's low density (about half that of nickel-based alloys), coupled with its high strength-to-weight ratio, makes it an optimal choice for a plethora of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, with superb cold formability and corrosion resistance, excellent weldability, and good impact hardness.
Producers of ASTM B265 Titanium Gr 1 Plate, Titanium Gr 1 Sheets, Titanium Gr 1 Finished Plates, ASTM B265 Titanium Grade 1 Coil Suppliers, Pure Titanium Gr 1 Hot Rolled Plates, Titanium Gr 1 Cold Rolled Plates, Titanium ASTM B265 Gr 1 Sheets, Gr 1 Titanium Patterned Plates Dealers, Titanium Gr 1 Perforated Plates, and Titanium Grade 1 Sheets and Plates Manufacturers in China.
Grade 2
DAXUN produces and stocks commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate (UNS R50400) is noted as the 'workhorse' of the commercially pure titanium family, offering high strength, excellent ductility, and superb corrosion resistance for numerous industrial applications.
Grade 2 Titanium Plate is a commercially pure titanium plate that offers an exceptional balance of strength and ductility. It has commendable impact strength and weldability, along with superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its excellent resistance to seawater and salt solutions is noteworthy.
Titanium's low density, high strength-to-weight ratio, and corrosion resistance make it an ideal choice for a vast array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the alloy of choice for many industrial applications that require good ductility and corrosion resistance.
DAXUN is a trusted metal expert specializing in both small and large titanium plate projects. We are your reference point and long-term partner, ready to provide you and your business with titanium plates and any technical assistance required. Think of DAXUN not just as your supplier of industrial pure titanium plates and titanium alloy plates, but as your strategic partner to help you overcome challenges and meet your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our service center in China is fully stocked with high-quality Gr5 Titanium Sheets and Titanium Alloy Plates, adhering to the ASTM B265 Specification. We pride ourselves on rapid order processing, ensuring minimal downtime for our valued customers. With our expertise in basic processing, water jet cutting, and efficient plate nesting, we deliver unparalleled added value, saving you both time and money.
Our commitment to excellence is demonstrated through continuous investments in our state-of-the-art production facilities. By securing strategic capacity agreements with our esteemed partners, Jiangsu Daxun Alloy Co., Ltd. ensures that we remain leaders in titanium plate quality, setting industry benchmarks both now and in the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today to discover the most competitive prices and receive comprehensive technical information on our superior Gr5 Titanium Sheets and Titanium Alloy Plates. We are dedicated to providing you with the best service and support in the industry.
Q1: What products can you offer?
A: We proudly offer an extensive range of steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L 300 series, and 400 series. Additionally, we provide duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, 600H.
Q2. Can you produce the products according to my own drawings?
A: Absolutely, we can manufacture products according to your detailed drawings, ensuring they meet your utmost satisfaction.
Q3. How does your factory manage quality control?
A: Quality is our top priority. We consistently place great emphasis on stringent quality control measures from inception to final delivery.
Q4. Can I request changes to the packaging and transportation methods?
A: Yes, we can adapt the packaging and transportation according to your specific requirements,
but please note that any additional costs and price differences incurred will be your responsibility.
Q5. How does your factory manage quality control?
A: Quality is our top priority. We consistently place great emphasis on stringent quality control measures from inception to final delivery.
Q6. What is the delivery time?
A: Our standard delivery time is 7 to 20 working days after payment confirmation.
In case of urgent orders, we can expedite the process to meet your deadlines.
Q7. What payment methods do you accept?
A: We accept 100% T/T in advance, Western Union for small orders,
B: 30% T/T upfront and the remaining 70% before shipment,
C: 100% Irrevocable LC at sight for large orders.
Q8: Can you provide Deep Drawing Quality (DDQ)?
A: Yes, we can. Our materials are suitable for stainless steel pots, sinks, bowls, and more. Share your specific requirements, and we will adjust the mechanical properties accordingly to meet your needs.
Q9: How can I get a sample?
A: We offer FREE samples for your testing and evaluation. If it's a small sample, we may cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: To date, we have exported our stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will be delighted to arrange a pick-up service for you.
){kind=link}