| Customization: | Available |
|---|---|
| Shape: | Square |
| Thickness: | 0.3mm-120mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN stocks and manufactures commercially pure titanium plates, including Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses ranging from 0.5 mm to 120 mm. The Gr1, Gr2, Gr3, and Gr4 titanium plates are the workhorses in the commercially pure titanium family, offering a unique combination of high strength, ductility, and excellent corrosion resistance, making them indispensable for various industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates are renowned for their excellent balance of strength and ductility. These commercially pure titanium plates possess impressive impact strength and weldability, along with superior corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Their outstanding resistance to seawater and salt solutions further amplifies their versatility.
The Gr5 (Grade 5) Ti-6Al-4V titanium alloy plate is a remarkable α-β titanium alloy, composed of 90% titanium, 6% aluminum, and 4% vanadium. Aluminum stabilizes the α phase, while vanadium stabilizes the β phase. This alloy boasts exceptional comprehensive performance and processability, with excellent strength at both room and high temperatures, good creep resistance, thermal stability, high fatigue and *** growth resistance in seawater, as well as satisfactory fracture toughness and hot salt stress corrosion resistance. Gr5 Ti-6Al-4V titanium alloy plates also exhibit superior process plasticity and superplasticity, making them ideal for diverse processing, welding, and machining methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titanium sheetAbout the mechanical properties of grade 2 titanium sheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the chemical composition of grade 1 titanium sheet About the mechanical properties of grade 1 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: Produced through meticulous plate rolling, with the final rolling achieved by cold rolling, these sheets are available in both work-hardened and heat-treated conditions. They can be further processed according to customer specifications, whether through mechanical or chemical means. 2. Hot-Rolled Titanium Plate: Manufactured through longitudinal rolling as well as longitudinal and transverse rolling, these plates range in thickness from 3.0mm to 155mm and are supplied in a heat-treated condition. If required, creep flattening can be applied as a heat treatment to eliminate internal stress and meet special flatness requirements. Sheets can be provided as cut blanks, allowing for complex shapes cut from the parent metal, and further processing is customizable based on customer needs.3. Forged Titanium Plate: Crafted by forging steel ingots on a vertical hydraulic press, followed by rolling, or through open die forging, and then rolling, these plates can reach standard dimensions up to 580 mm in thickness, 2000 mm in width, and 6000 mm in length. Dimensions and weight are customizable and agreed upon between the manufacturer and the customer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is your trusted manufacturer and supplier of Ti-6Al-4V Grade 5 TC4 UNS R56400 Alloy Titanium Plates from China. Committed to producing top-tier titanium alloy plates for diverse industries, we swiftly deliver worldwide ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our Grade 5 titanium plates (UNS R56400) come in thicknesses from 0.5mm to 300mm, with 0.5mm-6.0mm cold-rolled, 6.0-50mm hot-rolled, and 50mm and above forged. Known as the 'workhorse' of titanium materials, Grade 5 (Ti-6Al-4V) boasts high strength, ductility, excellent corrosion resistance, and high-temperature resilience, making it a favorite across general and military sectors. Compliance with ASTE, ASME, AMS, GB, GJB, MIL, JIS, EN, etc., ensures superior quality.
The Ti-6Al-4V Grade 5 titanium plate finds extensive application in aerospace, military industries, power generation, vehicle armor, rocket precision guidance systems, and marine sectors.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of high-quality Grade 1 titanium plates.
Pure Grade 1 titanium plates excel in ductility and cold formability, making them perfect for deep drawing applications. Renowned for outstanding general and seawater corrosion resistance, Grade 1 titanium resists oxidizing, neutral, and mildly reducing environments, including chlorides. Its low density (roughly half that of nickel-based alloys), high strength-to-weight ratio, and corrosion resistance make it ideal for challenging chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent cold formability, corrosion resistance, weldability, and impact hardness.
Producers of ASTM B265 Titanium Grade 1 Plates and Sheets, including hot-rolled and cold-rolled options, as well as patterned and perforated plates. We are your go-to suppliers for high-quality Titanium Gr 1 Sheets, Coils, and Finished Plates in China.
Grade 2
DAXUN's inventory includes commercially pure titanium plates Grade 2 (UNS R50400) in thicknesses from 0.5mm to 120mm. Grade 2 Titanium Plate, a stalwart in the commercially pure titanium family, combines high strength, ductility, and superb corrosion resistance for a wide array of industrial uses.
Grade 2 Titanium Plate, being commercially pure, offers a perfect blend of strength and ductility. It features good impact strength, weldability, and excellent corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Its resistance to seawater and salt solutions is exceptional.
With its low density, high strength-to-weight ratio, and impressive corrosion resistance, titanium proves ideal for various applications. Grade 2 Titanium Plate, resistant to stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C, has a melting point of 1660°C, making it a top choice for industrial applications requiring superior ductility and corrosion resistance.
DAXUN, a metal expert dedicated to both small and large titanium plate projects, stands as your reliable partner, providing titanium plates and comprehensive technical support. Consider DAXUN not only as your supplier of industrial pure and titanium alloy plates but as a strategic partner helping you tackle challenges and achieve your project ambitions.
At DAXUN's premier service center in China, our extensive inventory of titanium plate products ensures lightning-fast order processing. Leveraging state-of-the-art basic processing, precision water jet cutting, and efficient plate nesting techniques, we deliver unparalleled added value to our customers, significantly cutting down both time and costs.
Consistent investment in DAXUN's cutting-edge production facilities, coupled with strategic capacity agreements with our esteemed partners, positions DAXUN as a leader in titanium plate quality, both now and for the foreseeable future.
Reach out to DAXUN today to access the most current titanium plate pricing and comprehensive technical information.
Q1: What products can you offer?
A: We offer a diverse range of general steel types including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, and 316L. We also provide an extensive array of 300 and 400 series steels, as well as duplex stainless steel such as 2205, 2304, 2101, 2507, and high-nickel alloys like 904L, 800H, and 600H.
Q2. Can you produce the products according to my own drawings?
A: Yes, we can produce products according to your drawings, ensuring they meet your utmost satisfaction.
Q3. How does your factory manage quality control?
A: Quality is our top priority. We implement stringent quality control measures throughout the entire production process, from inception to completion.
Q4. Can I request to change the form of packaging and transportation?
A: Yes, we can modify the packaging and transportation forms according to your request. However, you will need to cover any additional costs and differences incurred during this period.
Q5. How does your factory manage quality control?
A: Quality is our top priority. We implement stringent quality control measures throughout the entire production process, from inception to completion.
Q6. How long is the delivery time?
A: Delivery time ranges from 7 to 20 working days after payment confirmation. For urgent orders, we expedite production to meet your timeline.
Q7. What are your payment terms?
A: We offer several payment options: A: 100% T/T in advance, Western Union (For Small Orders) B: 30% T/T upfront and 70% balance before shipment C: 100% Irrevocable LC at sight (For Large Orders)
Q8: Can you produce DDQ (Deep Drawing Quality) material?
A: Absolutely. Our materials are suitable for applications such as stainless steel pots, sinks, and bowls. Share your specific usage, and we will tailor the mechanical properties to meet your requirements.
Q9: How can I get a sample?
A: Free samples are available for your inspection and testing. For small pieces, we may cover the courier cost, subject to conditions.
Q10: Which countries have you exported to?
A: To date, we have exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and many more.
Q11: How can I visit your company?
A: You can fly to Guangzhou Baiyun International Airport, and we will arrange to pick you up from there.
){kind=link}