| Customization: | Available |
|---|---|
| Type: | Titanium Sheets |
| Application: | Industrial |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Titanium Plate and sheet Type | Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Grade | ASME SB265,AMS 4911,AMS 4919,AMS 4914,ASTM F67,ASTM F136, MSRR, AMS, BS |
| Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Length | 1000mm-13000mm or as required |
| Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Titanium Plate Width | 1000mm-1219mm-1500mm-1800mm-2000mm-2500mm or as required |
| UNS Plate Thickness | 0.3 to 120mm or as required |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate Process | Hot/ Cold Rolled/forging |
| UNS Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 Plate, Sheet and Strip | JIS: N0, N2, N1, NW2200, NW2201, NW4400, NW5500, NW6002, etc |
| DIN:H-Ni99.96, H-Ni99.95, H-Ni99.92, H-Ni99.90, H-Ni99.5, H-Ni99, etc | |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet ASTM | ASTM B265 |
| Titanium Gr1 Gr2 Gr3 Gr4 Gr5 Sheet AMS | AMS 4902 |
| Tolerances of width and thickness | EN 10258 (formerly DIN 59381),EN 10151 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip for springs,EN 10088 ASTM B265 Titanium Alloy Gr1 Gr2 Gr3 Gr4 Gr5 6Al4V Gr7 Gr9 Gr12 Gr23 strip (general) |
| Cp Gr1 Gr2 Gr3 Gr4 Gr5 Titanium Plate standards and approvals | EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 EN ISO 9445 ASTM A 480 ASTM A 959 ASME IID |
DAXUN maintains a robust inventory of commercially pure titanium plates, available in grades Gr1, Gr2, Gr3, and Gr4 (UNS), with thicknesses spanning from 0.5 mm to 120 mm. Renowned as the 'workhorse' of the commercially pure titanium family, Gr1, Gr2, Gr3, and Gr4 plates offer an exceptional combination of high strength, ductility, and superior corrosion resistance, making them indispensable for various industrial applications.
Gr1, Gr2, Gr3, and Gr4 titanium plates encompass commercially pure titanium, striking an excellent balance between strength and ductility. Known for their impressive impact strength and weldability, these plates exhibit remarkable corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, they provide outstanding resistance to seawater and salt solutions.
Gr5 Grade 5 Ti6Al4V titanium plate, a highly sought-after titanium alloy, comprises 90% titanium, 6% aluminum, and 4% vanadium. As an α-β type titanium alloy, aluminum stabilizes the α phase, while vanadium stabilizes the β phase. The Gr5 Ti-6Al-4V titanium alloy plate is renowned for its excellent comprehensive performance and process capabilities. Offering exceptional room temperature and high-temperature strength, superior creep resistance and thermal stability, high fatigue performance, and *** growth resistance in seawater, this alloy also boasts satisfactory fracture toughness and hot salt stress corrosion resistance. Further, it possesses excellent process plasticity and superplasticity, suitable for various processing and welding methods.
About the chemical composition of (Ti 6AL-4V) grade 5 titanium sheet
| Chemical Composition: | |||
| Symbol | Element | Min % | Max % |
| Al | Aluminum | 5.50% | 6.75% |
| V | Vanadium | 3.50% | 4.50% |
| Fe | Iron | 0.30% | |
| O | Oxygen | 0.20% | |
| C | Carbon | 0.08% | |
| N | Nitrogen | 0.05% | |
| H | Hydrogen | 0.01% | |
| Y | Yttrium | 0.01% | |
| Other, each | 0.10% | ||
| Other, total | 0.40% | ||
| Ti | Titanium | Remainder | |
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
About the chemical composition of grade 2 titaniumsheet
| Element | Weight % |
| C | ≤0.08 |
| O | ≤0.25 |
| N | ≤0.03 |
| H | ≤0.015 |
| Fe | ≤0.30 |
| *OEE | ≤0.10 |
| *OET | ≤0.40 |
| Ti | Remaining |
About the mechanical properties of grade 2 titanium sheet
| Alloy | UNS Designation | Spec. | Tensile Strength (min.) | Yield Strength 0.2% Offset (min.) | Elongation in 2 inches (min.) | Max Hardness | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ft2-h-°F) | ||||
| psi | MPa | ksi | psi | MPa | ksi | % | |||||||
| Grade 2 Titanium | R50400 | B338 | 50,000 | -345 | 50 | 40,000- | (276-448) | 40-65 | 20 | - | 16 | 5.1 | 144 |
| 50,000 | |||||||||||||
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
| Fe | 0.2 | ||
| O | 0.18 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
| Density | |
| lb/in3 | g/cm3 |
| 0.163 | 4.51 |
| Tensile Strength | |
| ksi | MPa |
| 35 min | 240 min |
| Yield Strength | |
| ksi | MPa |
| 20 min | 138 min |
| Hardness | |
| 70 HRC max | |
| Elongation | |
| 24% min |
| Element | Minimum (weight %) | Maximum (weight %) | Typical (weight %) |
|---|---|---|---|
| Al | 2.5 | 3.5 | |
| V | 2.0 | 3.0 | |
| Fe | 0.25 | ||
| O | 0.15 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Balance |
1. Cold-Rolled Titanium Plate: This exquisite titanium plate is meticulously crafted through plate rolling, with the final stage being cold rolling. These sheets are available in both work-hardened and heat-treated conditions. Depending on your specific requirements, the plates can undergo further mechanical or chemical processing to meet your precise specifications. 2. Hot-Rolled Titanium Plate: Skillfully produced by longitudinal rolling and both longitudinal and transverse rolling, these sheets boast thicknesses ranging from 3.0mm to 155mm. They are supplied in a heat-treated condition, with the option for creep flattening as heat treatment to eliminate internal stresses and achieve specialized flatness. Additionally, these sheets can be supplied as cut blanks, forming complex shaped parts from the parent metal, further processed to meet your specific needs.3. Forged Titanium Plate: Manufactured by forging steel ingots on a vertical hydraulic press and subsequently rolling, or through open die forging followed by rolling, these plates have impressive standard dimensions: up to 580mm in thickness, 2000mm in width, and 6000mm in length. The dimensions and weight can be tailored to your requirements through an agreement with the manufacturer.
| CP GR1 Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.50 g/cc | 0.163 lb/in³ | |
| a Lattice Constant | 2.95 Å @Temperature 25.0 °C | 2.95 Å @Temperature 77.0 °F | alpha phase |
| 3.29 Å @Temperature 900 °C | 3.29 Å @Temperature 1650 °F | beta phase | |
| c Lattice Constant | 4.683 Å | 4.683 Å @Temperature 77.0 °F | c/a = 1.587 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 120 | 120 | annealed |
| Hardness, Knoop | 132 | 132 | Estimated from Brinell. |
| Hardness, Rockwell B | 70 | 70 | annealed |
| Hardness, Vickers | 122 | 122 | Estimated from Brinell. |
| Tensile Strength | 124 - 138 MPa @Temperature 427 °C | 18000 - 20000 psi @Temperature 801 °F | |
| 152 - 179 MPa @Temperature 316 °C | 22000 - 26000 psi @Temperature 601 °F | ||
| 193 - 207 MPa @Temperature 204 °C | 28000 - 30000 psi @Temperature 399 °F | ||
| Tensile Strength, Ultimate | 240 MPa | 34800 psi | |
| Tensile Strength, Yield | 170 - 310 MPa | 24700 - 45000 psi | |
| 76.0 - 90.0 MPa @Temperature 427 °C | 11000 - 13100 psi @Temperature 801 °F | 0.2% offset | |
| 83.0 - 103 MPa @Temperature 316 °C | 12000 - 14900 psi @Temperature 601 °F | 0.2% offset | |
| 110 - 124 MPa @Temperature 204 °C | 16000 - 18000 psi @Temperature 399 °F | 0.2% offset | |
| Elongation at Break | 24% | 24% | |
| 25 - 30 % @Temperature 427 °C | 25 - 30 % @Temperature 801 °F | ||
| 30 - 35 % @Temperature 316 °C | 30 - 35 % @Temperature 601 °F | ||
| 40 - 50 % @Temperature 204 °C | 40 - 50 % @Temperature 399 °F | ||
| Reduction of Area | 35% | 35% | |
| Tensile Modulus | 103 GPa | 14900 ksi | |
| Compressive Modulus | 110 GPa | 16000 ksi | |
| Poissons Ratio | 0.37 | 0.37 | |
| Shear Modulus | 45.0 GPa | 6530 ksi | |
| Charpy Impact | 310 J | 229 ft-lb | V-notch |
| Impact Test | 136 J | 100 ft-lb | Impact Strength |
| Coefficient of Friction, Dynamic | 0.68 | 0.68 | Ti sliding on Ti; 300 m/min |
| 0.8 | 0.8 | Ti sliding on Ti; 40 m/min | |
| CP GR2 Titanium plate PHYSICAL PROPERTIES | |
| Density | Magnetic Permeability |
| 0.163 lbs/in-3 | Nonmagnetic |
| 4.51 g/cm-3 | Electrical Resistivity |
| Beta Transus (+/-25°F, +/--3.9°C) | 21 µΩ/in |
| 1680°F | 0.53 µΩ/m |
| 915°C | Elastic Modulus |
| Thermal Conductivity | 15.2-17.4 Msi |
| 12.60 BTU hr-1ft-1 °F-1 | 105-120 GPa |
| 21.79 W m-1 °C-1 | Typical values at room temperature of about 68-78°F (20-25°C) |
| GR5 TI6AL4V Titanium plate PHYSICAL PROPERTIES | |||
| Physical Properties | Metric | English | Comments |
| Density | 4.43 g/cc | 0.16 lb/in³ | |
| Mechanical Properties | |||
| Hardness, Brinell | 334 | 334 | Estimated from Rockwell C. |
| Hardness, Knoop | 363 | 363 | Estimated from Rockwell C. |
| Hardness, Rockwell C | 36 | 36 | |
| Hardness, Vickers | 349 | 349 | Estimated from Rockwell C. |
| Tensile strength | min. 895MPa | 129810 psi | |
| Yield strength | min. 828MPa | 120090 psi | |
| Elongation at Break | min.10 % | 10 % | |
| Reduction of Area | min.25 % | 25 % | |
| Modulus of Elasticity | 113.8 GPa | 16500 ksi | |
| Compressive Yield Strength | 970 MPa | 141000 psi | |
| Notched Tensile Strength | 1450 MPa | 210000 psi | Kt (stress concentration factor) = 6.7 |
| Ultimate Bearing Strength | 1860 MPa | 270000 psi | e/D = 2 |
| Bearing Yield Strength | 1480 MPa | 215000 psi | e/D = 2 |
| Poisson's Ratio | 0.342 | 0.342 | |
| Charpy Impact | 17 J | 12.5 ft-lb | V-notch |
| Fatigue Strength | 240 MPa | 34800 psi | at 1E+7 cycles. Kt (stress concentration factor) = 3.3 |
| Fatigue Strength | 510 MPa | 74000 psi | Unnotched 10,000,000 Cycles |
| Fracture Toughness | 75 MPa-m½ | 68.3 ksi-in½ | |
| Shear Modulus | 44 GPa | 6380 ksi | |
| Shear Strength | 550 MPa | 79800 psi | Ultimate shear strength |
| Electrical Properties | |||
| Electrical Resistivity | 0.000178 ohm-cm | 0.000178 ohm-cm | |
| Magnetic Permeability | 1.00005 | 1.00005 | at 1.6kA/m |
| Magnetic Susceptibility | 3.30E-06 | 3.30E-06 | cgs/g |
| Thermal Properties | |||
| CTE, linear 20°C | 8.6 µm/m-°C | 4.78 µin/in-°F | 20-100ºC |
| CTE, linear 250°C | 9.2 µm/m-°C | 5.11 µin/in-°F | Average over the range 20-315ºC |
| CTE, linear 500°C | 9.7 µm/m-°C | 5.39 µin/in-°F | Average over the range 20-650ºC |
| Specific Heat Capacity | 0.5263 J/g-°C | 0.126 BTU/lb-°F | |
| Thermal Conductivity | 6.7 W/m-K | 46.5 BTU-in/hr-ft²-°F | |
| Melting Point | 1604 - 1660 °C | 2920 - 3020 °F | |
| Solidus | 1604 °C | 2920 °F | |
| Liquidus | 1660 °C | 3020 °F | |
| Beta Transus | 980 °C | 1800 °F | |
DAXUN is a premier manufacturer and supplier of Ti 6AL 4V-Grade 5-TC4 UNS R56400 Alloy Titanium Plates from China. Committed to producing the world's highest-performance titanium alloy plates, DAXUN offers rapid worldwide delivery of ASTM B265 Grade 2 and Grade 5 Titanium Plates. Our inventory includes alloy titanium plates Grade 5 (UNS R56400) with thicknesses ranging from 0.5mm to 300mm (cold-rolled for 0.5mm-6.0mm, hot-rolled for 6.0-50mm, and forged for 50mm and above). Grade 5 titanium plate (Ti-6Al-4V) is renowned for its high strength, ductility, exceptional corrosion resistance, and high-temperature resilience, making it a preferred material in both general and military industries. Compliant with standards such as ASTE, ASME, AMS, GB, GJB, MIL, JIS, and EN.
Ti-6Al-4V Grade 5 titanium plate finds extensive applications in aerospace, military sectors, power generation, vehicle armor, precision rocket guidance components, and the marine industry.
Grade 1
Today, DAXUN Alloys stands as a premier global producer and supplier of superior Grade 1 titanium plates.
Pure Grade 1 titanium plate boasts exceptional ductility and cold formability, making it ideal for deep drawing applications. Grade 1 titanium is renowned for its outstanding general and seawater corrosion resistance, as well as its resilience against oxidizing, neutral, and mildly reducing environments, including chloride solutions. Titanium's low density (approximately half that of nickel-based alloys), coupled with a high strength-to-weight ratio and corrosion resistance, makes it an optimal choice for a variety of harsh chemical conditions. Commercially pure Grade 1 titanium is the softest and most ductile, offering excellent cold formability, superior corrosion resistance, weldability, and impact hardness.
DAXUN Alloys: Your trusted source for ASTM B265 Titanium Gr 1 Plates, Gr 1 Titanium Sheets, and finished plates. We are leading producers of pure titanium hot and cold-rolled plates, patterned and perforated plates, and coils. As top manufacturers and suppliers based in China, we deliver top-tier Grade 1 Titanium Sheets and Plates across the globe.
Grade 2
DAXUN stocks and produces commercially pure titanium plates Grade 2 (UNS R50400), available in thicknesses from 0.5mm to 120mm. Known as the 'workhorse' of the commercially pure titanium family, Grade 2 Titanium Plate (UNS R50400) offers a superb blend of strength, ductility, and excellent corrosion resistance for diverse industrial applications.
Grade 2 Titanium Plate is a high-strength, commercially pure titanium plate that provides an excellent balance between strength and ductility. It has superior impact strength and weldability, with outstanding corrosion resistance in highly oxidizing environments, alkaline media, brine solutions, weakly reducing environments, and wet ***. Additionally, it has excellent resistance to seawater and salt solutions.
Titanium's low density, exceptional strength-to-weight ratio, and corrosion resistance make it an ideal material for a broad array of applications. It effectively resists stress corrosion cracking, pitting, and crevice corrosion in chloride solutions below 70°C. With a melting point of 1660°C, Grade 2 Titanium Plate is the preferred alloy for most industrial applications requiring optimal ductility and corrosion resistance.
DAXUN is your expert partner for both small and large titanium plate projects. As a reference point and long-term partner, we are ready to supply titanium plates and provide any technical assistance you may require. Consider DAXUN not just as your supplier of industrial pure titanium and titanium alloy plates, but as a strategic partner helping you overcome challenges and achieve your project goals.
At Jiangsu Daxun Alloy Co., Ltd., our state-of-the-art service center in China ensures rapid order fulfillment with an extensive stock of titanium plate products. Leveraging cutting-edge basic processing, precision water jet cutting, and efficient plate nesting, we deliver unparalleled added value to our customers, significantly reducing both time and costs.
Jiangsu Daxun Alloy Co., Ltd. remains at the pinnacle of titanium plate quality through continuous investment in our advanced production facilities and strategic capacity agreements with our esteemed partners. This unwavering commitment guarantees that DAXUN leads the industry both today and in the future.
Reach out to Jiangsu Daxun Alloy Co., Ltd. today for the most competitive prices and the latest technical specifications on our premium titanium plate offerings.
Q1: What products can you offer?
A: We pride ourselves on offering a diverse range of general steel types, including 310S, 316L, 304, 304L, 201, 904L, 316H, 316, 316L, 300, as well as
400 series, and duplex stainless steel like 2205, 2304, 2101, 2507, and high-nickel alloy such as 904L, 800H, 600H.
Q2. Can you produce the products according to my own drawings?
Absolutely, we can customize production based on your drawings to ensure your utmost satisfaction.
Q3. How does your factory manage quality control?
Quality is our top priority. We stringently control quality from the inception of the process right through to the final stages.
Q4. Can I request changes to packaging and transportation?
Yes, we can modify packaging and transportation forms based on your requests. However,
please note that you will need to cover any additional costs incurred during this period.
Q5. How does your factory ensure quality control?
Quality is our primary concern. We maintain rigorous quality control from start to finish.
Q6. What is the delivery time?
A: Delivery is typically within 7-20 working days after payment confirmation.
In urgent cases, we prioritize your order to expedite workshop completion.
Q7. What are your payment options?
A: For small orders, we accept 100% T/T in advance or Western Union.
B: For other orders, we accept 30% T/T upfront and the remaining 70% before shipment.
C: For large orders, a 100% Irrevocable LC at sight is available.
Q8: Can you manufacture Deep Drawing Quality (DDQ) products?
A: Yes, our materials are suitable for items like stainless steel pots, sinks, and bowls. Inform us of your specific use, and we will adjust the mechanical properties to meet your requirements.
Q9: How can I obtain a sample?
A: We provide FREE samples for your evaluation. For small pieces, we can cover the courier cost, depending on the circumstances.
Q10: Which countries have you exported to?
A: We have successfully exported stainless steel materials to countries including Vietnam, Thailand, Turkey, Russia, Morocco, South Korea, India, Pakistan, UAE, Ukraine, and more.
Q11: How can I visit your company?
A: Fly into Guangzhou Baiyun International Airport, and we will arrange to pick you up.
){kind=link}